RIDEN RD6006 Series

Contents

RD RIDEN RD6006 Series DC Adjustable Power Supply User Manual

Models: RD6006, RD6006-W, RD6012, RD6012-W, RD6018, RD6018-W, RD6006P, RD6006P-W

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your RD RIDEN RD6006 Series DC Adjustable Power Supply. Please read this manual thoroughly before use and keep it for future reference. This series includes models RD6006, RD6006-W, RD6012, RD6012-W, RD6018, RD6018-W, RD6006P, and RD6006P-W, offering various voltage, current, and power capabilities, some with Wi-Fi connectivity.

Video: Overview of the RD RIDEN DC Power Supply features and interface.

2. Safety Precautions

  • Ensure the input voltage is within the specified range (6-70V for RD6006/RD6012/RD6018, 7-70V for RD6006P).
  • Do not install or remove the Wi-Fi module when the device is powered on, as this may cause damage.
  • Always ensure proper ventilation to prevent overheating.
  • Use appropriate fuses as specified (e.g., 20A for input and output).
  • Do not connect non-original accessories to the temperature sensor, fan, or communication interfaces to avoid device damage.
  • Always observe polarity when connecting loads and power sources.

3. Product Overview

The RD RIDEN DC Power Supply is a digital control, adjustable step-down voltage converter. It features a 2.4-inch color HD display, keypad control, and optional Wi-Fi for APP and PC software control. It supports various functions including data storage, data adjustment, and comprehensive protection features.

RD6006P Digital Control Power Supply front view
Figure 3.1: Front view of the RD6006P Digital Control Power Supply, showing the display, keypad, and output terminals.
RD6006P Digital Control Power Supply with internal view
Figure 3.2: Internal view of the RD6006P, highlighting the linear and switching power sections, fan, and communication board.

3.1. Key Features

  • High precision sampling chip for accurate measurements.
  • 2.4-inch color HD display for clear data visualization.
  • Keypad control for easy setting and operation.
  • Over Voltage Protection (OVP), Over Current Protection (OCP), and Over Temperature Protection (OTP).
  • Data storage and recall functions.
  • Optional Wi-Fi module for APP and PC software control (for -W models).
  • Dual fuse sets for easy replacement.

4. Setup and Assembly

The RD RIDEN power supply is designed for DIY integration. To assemble a complete adjustable power supply, you will need a case (e.g., S400), an AC-DC power source (e.g., 400W PSU), and necessary cables.

Integrated Design, Easy To DIY diagram showing power supply, PSU, and case
Figure 4.1: Diagram illustrating the components needed for a complete power supply: RD6012/RD6012W module, 800W PSU, and S800 Case.

4.1. S400 Case Assembly (Example)

If you are using an S400 case, refer to the accessory list and follow these general steps:

S400 Accessory List showing various screws, fan, power board, switch, and cables
Figure 4.2: S400 Accessory List, including case fixing screws, switch power supply fixing screws, fan fixing nuts/screws, fan power board, rocker switch, AC power socket, fan, and cables.
  1. Mount the power supply module into the case using the provided screws.
  2. Install the AC power socket and rocker switch into their designated openings on the case.
  3. Connect the AC power input to your AC-DC power source.
  4. Connect the output of the AC-DC power source to the input terminals of the RD RIDEN module.
  5. Install the cooling fan and connect it to the fan interface on the module.
  6. Secure the case panels using the case fixing screws.
  7. Attach the non-slip mats to the bottom of the case.

4.2. Wi-Fi Module Installation (for -W models)

For models with Wi-Fi functionality, ensure the Wi-Fi communication board is correctly inserted. Do not install or remove the Wi-Fi module when the power supply is on, or it may be damaged.

Internal view showing Wi-Fi Communication Board and fuse locations
Figure 4.3: Internal view highlighting the Wi-Fi Communication Board, temperature sensor interface, fan interface, and input/output fuse locations.

5. Operating Instructions

5.1. Basic Operation

RD6012P front panel with controls and display
Figure 5.1: Front panel of the RD6012P, showing the display, keypad, setting wheel, and output terminals.
  • Power On/Off: Press the green ON/OFF button to power the device.
  • Setting Voltage/Current: Use the 'V-SET' and 'I-SET' buttons to enter voltage and current setting modes. Use the numeric keypad or the setting wheel (BY) to adjust values. Use 'BZ' (move cursor left) and 'CA' (move cursor right) to navigate digits. Press 'CB' (set button) or 'ENTER' to confirm.
  • Data Storage/Recall: Press 'MEM' to access memory functions. Use the keypad to select memory slots (M1-M9) to store or recall settings.
  • Output Control: Press the ON/OFF button on the right side to enable or disable the output.

5.2. Display Interface

The device features a 2.4-inch color HD display with multiple display styles:

Display interface showing traditional, detailed, and curve styles
Figure 5.2: The display interface can be switched between Traditional Style (default), Detailed Style, and Curve Style by pressing the ENTER button repeatedly.
  • Traditional Style (Default): Shows large, clear readings for output voltage, current, and power.
  • Detailed Style: Provides more detailed information including input voltage, set values, protection values, and system temperature.
  • Curve Style: Displays real-time output voltage, current, and power curves.

To switch between display styles, press the 'ENTER' button repeatedly.

5.3. Protection Features

The device includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Over Temperature Protection (OTP).

Protection settings and abnormal status indications
Figure 5.3: Setting OVP and OCP values, and indications for Normal Status, Over Current Status (OCP), Over Voltage Status (OVP), and Over Temperature Status (OTP).
  • Setting Protection Values: Press the corresponding buttons (e.g., OVP, OCP) to set the desired protection thresholds.
  • When the output voltage/current exceeds the set protection value, the output will automatically shut down to prevent damage.
  • Abnormal Status Indication: The display will show specific icons for OCP, OVP, or OTP if triggered.

5.4. Keypad Lock Function

To prevent accidental operation, you can lock the keypad:

Keypad lock/unlock status indication
Figure 5.4: Keypad lock/unlock status indication. Press SHIFT then LOCK to toggle.
  • Press the 'SHIFT' button, then the 'LOCK' button to toggle the keypad lock.
  • A lock icon on the display indicates the keypad is locked.

6. APP Wireless Control (for -W models)

For Wi-Fi enabled models (e.g., RD6006-W, RD6012-W, RD6018-W, RD6006P-W), you can remotely monitor and set the power supply parameters using a mobile APP.

6.1. APP Installation

  • The APP supports Android 5.0-10.0 and iOS 10.0-13.4 (iPhone6-iPhone11).
  • Android: Download the APP from Google Play by searching "RDPower" or from the provided zip-file URL: https://drive.google.com/drive/folders/1V0I6P1slJilN1yBOsTO9YGLVdkuO0cX9?usp=sharing.
  • iOS: Search "RDPower" in the App Store.
  • Important: Allow all necessary permissions during installation (background running, Bluetooth, folder access, etc.).
  • The Wi-Fi communication only supports 2.4G signals; 5G is not supported.
  • If using a Huawei phone, turn off the random MAC address function for proper connection.
RUIDENG APP icon
Figure 6.1: RUIDENG APP icon.

6.2. Network Distribution (First-time Wi-Fi Connection)

  1. Ensure the Wi-Fi board is correctly inserted and power on the RD6012. The blue LED should blink once.
  2. Set the communication interface to Wi-Fi.
  3. Place the RD6012 and your mobile phone close to a 2.4G router. Ensure your phone is also on the same 2.4G network and the router has AP isolation and WMM functions disabled.
  4. The RD6012 will wait for the phone to connect (as shown in Picture 3 from the manual).
  5. On the APP, call out the sidebar (BN), click on "Network distribution" (as shown in Picture 5 from the manual).
  6. Enter your Wi-Fi password and confirm you are using a 2.4G network (as shown in Picture 6 from the manual).
  7. After about 10 seconds, the RD6012 will obtain the IP address of the mobile phone (as shown in Picture 4 from the manual).
  8. Click "Next", fill in the Wi-Fi password (as shown in Picture 7 from the manual), and click "CONFIRM".
  9. Wait for approximately 20 seconds. It should show success (as shown in Picture 8 from the manual), and the RD6012 will automatically restart.
  10. Return to the main interface and click "BO" (Connection).
  11. If the connection fails, power off the module and re-operate. Refer to the Android APP download and connection operation video for visual guidance: https://youtu.be/QwyBEUCnp9c.
APP Initialization screen for entering WiFi informationAPP menu showing Network distribution option
Figure 6.2: APP screens for Wi-Fi initialization and menu access.
WIFI Config screen showing Server IPAPP Distribution network screen showing connection status
Figure 6.3: APP screens for displaying Server IP and network distribution status.

6.3. APP Operation

Once connected, the APP main interface will be displayed, allowing control and monitoring of the power supply. Refer to the Android APP operation video for visual guidance: https://youtu.be/hqrF4keTfbE.

APP main interface with controls and data display
Figure 6.4: Main interface of the RUIDENG APP, showing controls for voltage, current, power, and system information.
  • Setting Output: Click "BV" to set the output voltage and use the wheel "BY" to adjust the value. Use "BZ" and "CA" to change the cursor position. Click "CB" to set the parameter.
  • Export Data: Click "BP" to export the voltage-current curve to an Excel file. Up to 24 hours of data can be recorded.

7. PC Software Control

You can monitor and set the digital power supply using PC software (supports Windows 7-10 systems) for a friendly user interface and powerful functions.

PC software interface for controlling the power supply
Figure 7.1: PC software interface showing real-time data, control dials, and settings for the power supply.
  • Installation: It is recommended to install and test the software before purchasing the product due to potential incompatibilities.
  • Connection: Connect the power supply to your PC via USB.
  • Operation: The software provides a comprehensive interface to adjust settings, view data curves, and manage device functions.
  • Firmware Upgrade: The PC software can be used to upgrade the device firmware. This process typically takes about 100 seconds.

8. Maintenance

8.1. Fuse Replacement

The device features dual fuse sets for easy replacement. If a fuse is burnt, you can replace it with a new one. When installing a new fuse, it is recommended to set the current under 10A.

Internal view showing fuse locations
Figure 8.1: Internal view highlighting the 20A input fuse and 20A output fuse locations.

8.2. Clock Battery

The device requires a CR1220 lithium cell for the clock. Please prepare this battery yourself as it is not included.

9. Troubleshooting

  • No Power: Check input power connections and ensure the power source is functioning. Verify fuses are intact.
  • Output Not Enabling: Ensure the output is turned on via the ON/OFF button. Check for OVP/OCP/OTP triggers.
  • Wi-Fi Connection Issues:
    • Ensure the Wi-Fi module is correctly inserted and the device is powered off during insertion/removal.
    • Verify your mobile device is connected to a 2.4G Wi-Fi network (5G is not supported).
    • Disable AP isolation and WMM functions on your router.
    • If the IP address changes or connection fails, try resetting the network by pressing the “left direction” button then “ENTER” on the device, and repeat the network distribution process.
    • If using a Huawei phone, ensure the random MAC address function is turned off.
  • Inaccurate Readings: Ensure proper calibration. If issues persist, refer to the technical parameters for measurement accuracy specifications.
  • Device Overheating: Ensure the cooling fan is operating correctly. Check for obstructions to airflow. The fan starts when output voltage > 40V or output current > 4A or system temperature > 45°C (for RD6006/RD6006-W).

10. Specifications

Below are the technical parameters for the RD RIDEN DC Power Supply series:

ParameterRD6006RD6006-WRD6012RD6012-WRD6018RD6018-WRD6006PRD6006P-W
Input voltage range6-70.00V7-70.00V
Output voltage range0-60.00V0-60.000V
Output current range0-6.000A0-12.00A0-18.00A0-6.0000A
Output power range0-360W0-720W0-1080W0-360.00W
Input voltage measurement resolution0.01V
Output voltage setting measurement resolution0.01V0.001V
Output current setting measurement resolution0.001A0.01A0.0001A
Battery voltage measurement resolution0.01V
Input voltage measurement accuracy±(1%+5 digits)
Output voltage accuracy between setting and measurement±(0.3%+3 digits)±(0.5‰+4 digits)
Output current accuracy between setting and measurement±(0.5%+5 digits)±(1‰+6 digits)
Battery voltage measurement accuracy±(0.5%+3 digits)
Automatic cut off current value when charging10mA100mASet by yourself
Output ripple typical100mV VPP250mV VPP@6A20mV VPP
Working temperature range-10℃~40℃
External sensor Temperature detection range-10℃~100℃/0℉~200℉
External sensor Temperature detection accuracy±3℃/±6℉
Constant voltage mode response time2ms (0.1A-5A Load)
Constant voltage mode load regulation±(0.1%+2 digits)
Constant current mode load regulation±(0.1%+3 digits)
Capacity measurement range0-9999.99Ah
Energy measurement range0-9999.99Wh
Capacity and energy statistical error±2%
Buck working modeVoltage drop > 1V and > 10%Voltage drop > 10%*VOUT + 2V
Cooling fan start conditionOutput voltage > 40V or Output current > 4A or System temperature > 45℃Output current > 8A or System temperature > 45℃Output current > 4A or System temperature > 45℃
Cooling fan shut down condition when workingOutput voltage < 40V and Output current < 3.9A and System temperature < 45℃Output current < 7.9A and System temperature < 45℃Output current < 3.9A and System temperature < 45℃
Over temperature protectionSystem temperature > 80℃
Screen brightness setting0-5 (6 levels in total)
Screen2.4inch color HD display
Weight (with package)About 0.58kgAbout 0.61kgAbout 0.68kgAbout 0.62kg
Product dimension167*81*65mm167*81*69mm167*81*65mm
Support USB communicationYes
Support WiFi communicationNoYesNoYesNoYesNoYes
Product dimensions diagram
Figure 10.1: Product dimensions for the RD RIDEN DC Power Supply module and packaging.

11. User Tips

  • Versatile Use: This adjustable power supply can be used for various applications, including repairing cell phones and other electronic devices, thanks to its precise voltage and current control.
  • Adjustable Source: The device functions as a highly adjustable power source, allowing users to fine-tune output parameters for specific needs.
  • Firmware Updates: Keep an eye on the manufacturer's website for firmware updates. The device supports firmware upgrades via PC software, which can add new functions and improve performance.
  • APP Compatibility: Before relying on the APP function, install and test it on your specific mobile device, as compatibility can vary across Android phones and iOS versions.

12. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.