1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Autel Universal Car Remote Smart Key. Designed for compatibility with Autel MaxiIM KM100, IM508, and IM608 PRO devices, these smart keys offer advanced functionality for vehicle access and control. Please read this manual thoroughly before attempting any procedures to ensure proper and safe use.
2. Package Contents
Each Autel Universal Smart Key package typically includes the following components:
- Smart Key Shell
- Circuit Board
Note: The CR2032 battery and the emergency key blade are NOT included and must be purchased separately.
3. Specifications
| Feature | Detail |
|---|---|
| Appearance | 8 series |
| Battery Type | CR2032 (not included) |
| Battery Life | >1 year |
| Number of Buttons | 4 (typical, may vary by model) |
| Working Frequency | 315M/433M |
| Power Consumption | <6.5 uA (standby) |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
| Manufacturer Part Number | AUTEL |
| Interchange Part Number | AT003BL/AT004CL |
| R/C Function | WITH |
| Customization | Yes |
| OEM NO. | SMART KEY |
| Material | PVC |
4. Setup and Programming
The Autel Universal Smart Key requires programming and assembly using a compatible Autel MaxiIM device (e.g., KM100, IM508, IM608 PRO) and a CR2032 battery. The key blade also needs to be cut by a professional locksmith.
4.1 Key Making Process Overview
- Remotes Generation: Use your Autel MaxiIM device to generate the remote data for your specific vehicle.
- Battery Installation: Install a new CR2032 battery into the smart key circuit board.
- Key Blade Cutting: Have the emergency key blade cut by a professional locksmith to match your vehicle's ignition.
- Key Matching: Use the Autel MaxiIM device to match the smart key to your vehicle's immobilizer system.
- Remote Key Generation: Complete the remote key generation process using the Autel MaxiIM device.
4.2 Compatible Programming Devices
This smart key is designed to be programmed using Autel's professional key programming tools. Ensure you are using a compatible device for successful setup.
5. Operating the Smart Key
Once successfully programmed and assembled, your Autel Universal Smart Key functions like your original vehicle remote. The typical buttons and their functions include:
- Lock: Press to lock all vehicle doors.
- Unlock: Press to unlock all vehicle doors.
- Trunk: Press to open the vehicle's trunk or tailgate.
- Panic: Press and hold to activate the vehicle's alarm system.
- EV Charge / Remote Start or A/C: Depending on your vehicle model and key configuration, this button may activate EV charging, remote engine start, or remote air conditioning.
6. Maintenance
6.1 Battery Replacement
The smart key uses a CR2032 coin cell battery. When the remote's range decreases or it stops responding, it's likely time to replace the battery.
- Carefully open the smart key shell.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring correct polarity (+ side up).
- Close the smart key shell securely.
6.2 General Care
- Avoid exposing the smart key to extreme temperatures, direct sunlight, or moisture.
- Do not drop the key or subject it to strong impacts.
- Clean the exterior with a soft, dry cloth if necessary.
7. Troubleshooting
7.1 Key Not Responding After Setup
- Check Battery: Ensure a fresh CR2032 battery is correctly installed.
- Reprogramming: If the key was cloned or configured and then stopped working, it might require reprogramming or re-matching with the vehicle's immobilizer system using your Autel MaxiIM device.
- Device Compatibility: Verify that the Autel MaxiIM device used for programming is compatible with your specific vehicle model and the smart key.
- Professional Assistance: If issues persist, consult a professional locksmith or an automotive technician specializing in key programming.
8. User Tips
- Verify Quantity: When purchasing, confirm the number of smart keys included in your package (e.g., 1PC, 3PCS).
- Professional Programming: For optimal performance and to avoid issues, it is highly recommended to have the smart key programmed by a certified professional using an Autel MaxiIM device.
- Emergency Key Blade: Always ensure your emergency key blade is properly cut and stored, as it can be crucial in situations where the remote function fails or the battery dies.
9. Warranty and Support
The Autel Universal Car Remote Smart Key comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact your original point of purchase or Autel customer service.
For additional information or support, please refer to the official Autel website or contact their authorized distributors.
