PowMr POW-HVM1K-12V/POW-HVM1.5K-24V

Contents

PowMr Solar Hybrid Inverter User Manual

Models: POW-HVM1K-12V, POW-HVM1.5K-24V

Brand: PowMr

1. Introduction

This PowMr Solar Hybrid Inverter is a versatile device combining the functions of an inverter, solar charger, and battery charger. It is designed to provide uninterruptible power support in a compact and lightweight form factor. The comprehensive LCD display allows users to configure various settings, including battery charging current, AC/solar charger priority, and acceptable input voltage, to suit different applications.

Key features include pure sine wave output, compatibility with both mains voltage and generator power, automatic restart upon AC recovery, and robust protection against overload, over-temperature, and short circuits. Its smart battery charger design optimizes battery performance, and it supports a cold start function.

2. Safety Instructions

Please read all instructions and cautionary markings on the unit and in this manual before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury.

2.1 General Safety Precautions

  • Ensure the inverter is installed in a dry, well-ventilated area, away from flammable materials and corrosive gases.
  • Do not disassemble the unit. Refer servicing to qualified personnel.
  • Keep children away from the inverter.
  • Do not operate the inverter if it appears damaged in any way.
  • Ensure all connections are tight to prevent overheating.

2.2 Electrical Safety

  • Before connecting any wiring, disconnect all power sources to the inverter, including AC input, PV input, and battery.
  • Use appropriate circuit breakers and fuses for all connections as specified in local electrical codes.
  • Ensure proper grounding of the inverter.
  • Verify correct polarity for battery and PV connections. Incorrect polarity can cause severe damage.

3. Package Contents

Upon unpacking, please verify that all items listed below are included and undamaged:

Package contents of the PowMr Solar Inverter Charger, including inverter, manual, and terminals.
Figure 3.1: Package Contents
  • PowMr Solar Hybrid Inverter (1 unit)
  • User Manual (1 copy)
  • U-shaped Terminals (2 pieces)

4. Product Overview

The PowMr Solar Hybrid Inverter features a compact and lightweight design, ensuring stable power delivery. It supports both solar inverter output and grid or generator bypass output, providing 220V output voltage and up to 1500W of power. The unit includes an LCD display for monitoring and configuration, along with various connection ports for a complete hybrid power system.

Labeled diagram of PowMr Solar Inverter Charger showing LCD, indicators, buttons, and connection ports.
Figure 4.1: Inverter Components and Connections

Key Components:

  1. LCD Display: Shows system status and configuration menus.
  2. Status Indicator: Indicates operational status.
  3. Charging Indicator: Shows battery charging status.
  4. Fault Indicator: Alerts to system errors.
  5. Function Buttons: Used for navigation and setting adjustments (ESC, UP, DOWN, ENTER).
  6. Power On/Off Switch: Main power control for the unit.
  7. AC Input: Connection for grid or generator AC power.
  8. AC Output: Connection for AC loads.
  9. PV Input: Connection for solar panel array.
  10. Battery Input: Connection for battery bank.
  11. Circuit Breaker: Overcurrent protection for the system.
  12. Output Receptacles: AC output sockets for connecting appliances.

5. Setup

5.1 Mounting the Inverter

Choose a suitable location for mounting the inverter. It should be:

  • Indoors, protected from direct sunlight, rain, and moisture.
  • Well-ventilated to ensure proper heat dissipation.
  • Mounted vertically on a sturdy surface.
  • Away from flammable materials and corrosive substances.

5.2 Wiring Connections

All wiring should be performed by a qualified electrician in accordance with local electrical codes. Ensure all power sources are disconnected before making any connections.

Wiring diagram for PowMr Hybrid Power System with solar, generator, utility, battery, and home appliance connections.
Figure 5.1: Hybrid Power System Wiring Diagram
  1. Battery Connection: Connect the battery bank to the Battery Input terminals (10) on the inverter. Ensure correct polarity (positive to positive, negative to negative). The inverter is compatible with 12VDC or 24VDC battery systems, including Lithium and Lead-Acid batteries.
  2. PV Input Connection: Connect the solar panel array to the PV Input terminals (9). Ensure the PV array voltage and power are within the inverter's specifications (Max. PV Array Power: 600W for 1KW model, 1200W for 1.5KW model; PV Array MPPT Voltage Range: 20-150Vdc or 30-150Vdc depending on model; MAX PV input voltage: 150VDC).
  3. AC Input Connection: Connect the utility grid or a generator to the AC Input terminals (7).
  4. AC Output Connection: Connect your AC loads (home appliances) to the AC Output terminals (8) or the Output Receptacles (12).
  5. Grounding: Ensure the inverter is properly grounded according to local regulations.

5.3 Initial Startup

  1. After all connections are securely made, switch on the battery breaker (if applicable).
  2. Switch on the PV array breaker (if applicable).
  3. Turn on the Power On/Off Switch (6) on the inverter.
  4. Observe the LCD display and status indicators for normal operation.
  5. Finally, switch on the AC input breaker (if applicable) and then the AC output breaker to power your loads.

6. Operation

6.1 LCD Display and Function Buttons

The LCD display provides real-time system information and allows for user configuration. Use the Function Buttons (ESC, UP, DOWN, ENTER) to navigate through menus and adjust settings.

6.2 Configurable Settings

Through the LCD display, you can configure various parameters:

  • Input Voltage Range: Set the acceptable input voltage range for home appliances or personal computers.
  • Battery Charging Current: Adjust the charging current for your battery bank based on its capacity and type.
  • AC/Solar Charger Priority: Define whether AC power or solar power takes priority for charging the battery.

6.3 Charging and Output Modes

The inverter supports multiple charging and load output modes to optimize energy management.

PowMr Inverter charging and output modes diagram.
Figure 6.1: Charging & Output Modes

Four Charging Modes:

  • Solar First: Prioritizes solar power for charging.
  • Utility First: Prioritizes utility grid power for charging.
  • Solar and Utility: Uses both solar and utility power for charging.
  • Only Solar: Charges exclusively from solar power.

Three Load Output Working Modes:

  • Utility First: Prioritizes utility grid power to supply loads.
  • Solar First: Prioritizes solar power to supply loads.
  • SBU First (Solar-Battery-Utility): Prioritizes solar, then battery, then utility for supplying loads.

6.4 Battery Compatibility

This inverter is designed to be compatible with a variety of battery types, ensuring flexibility for different energy storage systems.

PowMr Inverter compatible battery types: GEL, FLD, SLD, LFE, USE, LI.
Figure 6.2: Compatible Battery Types

Compatible battery types include:

  • GEL batteries
  • FLD (Flooded) batteries
  • SLD (Sealed Lead-Acid) batteries
  • LFE (LiFePO4) batteries
  • USE (User-defined) settings for custom battery types
  • LI (Lithium-ion) batteries

7. Troubleshooting

If the inverter is not functioning as expected, please refer to the following common issues and solutions:

ProblemPossible CauseSolution
Inverter does not respond after power supply.No power from battery/PV/AC input, loose connections, internal fault.Check battery voltage and connections. Ensure PV and AC inputs are active. Verify all wiring is secure. Check the circuit breaker (11) on the inverter. If problem persists, contact support.
Overload warning/shutdown.Connected load exceeds inverter's rated power.Reduce the connected load. Check the total wattage of appliances.
Over-temperature warning/shutdown.Inadequate ventilation, high ambient temperature, blocked fan.Ensure the inverter is in a well-ventilated area. Clear any obstructions from the cooling fans. Allow the unit to cool down.
Battery not charging.PV input too low, AC input not present, incorrect charging settings.Check PV array voltage and sunlight conditions. Verify AC input is available. Review charging current and priority settings on the LCD.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your PowMr Solar Hybrid Inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris.
  • Connections: Annually check all electrical connections for tightness. Loose connections can cause overheating and damage.
  • Battery Health: Monitor your battery bank's health and charge levels regularly. Follow the battery manufacturer's maintenance guidelines.
  • Environment: Ensure the installation environment remains within the specified operating temperature and humidity ranges.

9. Specifications

Detailed technical specifications for the PowMr Solar Hybrid Inverter models:

Detailed technical specifications table for PowMr 1KW and 1.5KW Solar Hybrid Inverters.
Figure 9.1: Technical Specifications Table
Parameter1.0KW-12V Model1.5KW-24V Model
Rated Output Power1000VA/1000W1500VA/1500W
Output Voltage WaveformPure Sine Wave
Output Voltage Regulation230Vac ±5%
Output Frequency50HZ
Peak Efficiency94%
Overload Protection3s@>150% load; 5s@ 100%~150% load
Surge Capacity2* rated power for 5 seconds
Charging Algorithm3-Step
AC Charging Current (Max)40Amp
Max. PV Array Power600W1200W
PV Array MPPT Voltage Range20~150Vdc30~150Vdc
MAX PV Input Voltage150Vdc
Max Solar Charging Current40Amp
Max (AC+Solar) Charging Current80Amp
Safety CertificationCE
Operating Temperature Range-10°C to 50°C
Storage Temperature-15°C - 60°C
Humidity5% to 95% Relative Humidity (Non-condensing)
Dimension (mm)286 x 240 x 91
Net Weight (KG)33.5

10. User Tips

  • Battery Type Selection: The inverter is compatible with various battery types, including LiFePO4. Ensure you select the correct battery type in the inverter's settings for optimal charging and discharge performance.
  • Ventilation: Always ensure adequate airflow around the inverter to prevent overheating, especially during high load operation or in warm environments.
  • Professional Installation: For safety and optimal performance, it is highly recommended to have the inverter installed by a certified electrician or solar professional.

11. Warranty and Support

This PowMr Solar Hybrid Inverter comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or the official PowMr customer service.

12. Product Video Overview

Watch this video for a visual guide to the PowMr Solar Hybrid Inverter's features and components:

Video: PowMr Solar Hybrid Inverter Features and Overview

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.