Introduction
This user manual provides detailed instructions for the operation and maintenance of your Tuya WiFi 14-in-1 Indoor Air Quality Monitor. This device is designed to accurately detect various air quality parameters, providing you with essential information about your indoor environment.
The monitor features a 2.8-inch TFT color display and integrates with the Tuya Smart APP for real-time data monitoring and historical data viewing. It detects a comprehensive range of pollutants and environmental factors, including:
- Carbon Dioxide (CO₂)
- Carbon Monoxide (CO)
- Total Volatile Organic Compounds (TVOC)
- Formaldehyde (HCHO)
- Particulate Matter (PM2.5, PM1.0, PM10)
- Temperature
- Humidity
Additionally, it includes time, date, alarm, timer, and stopwatch timer functions for enhanced utility.

Package Contents
Please check the package for the following items:
- 1 x Air Quality Detector (Model: 2CO10)
- 1 x Type-C Charging Cable
- 1 x User Manual (English)

Setup Guide
1. Charging the Device
Before initial use, fully charge the air quality monitor. Connect the provided Type-C charging cable to the device and a 5V, 1A USB power source. The built-in 2000mAh lithium battery provides a standby time of 6-7 hours on a full charge.
2. Powering On/Off
Press and hold the power button (location typically on the side or top) for a few seconds to turn the device on or off.
3. Tuya Smart APP Connection
For remote monitoring and historical data, connect the device to the Tuya Smart APP:
- Download the Tuya Smart APP from your smartphone's app store.
- Register or log in to your Tuya Smart account.
- Follow the in-app instructions to add a new device. Ensure your monitor is in pairing mode (refer to the device screen for pairing indicators, usually a blinking Wi-Fi icon).
- Once connected, the time and date on the monitor will automatically synchronize with your phone.

Operating Instructions
1. Display Modes
The monitor offers multiple display modes:
- Display Mode 1 (Air Quality): Shows real-time readings for PM2.5, PM1.0, PM10, CO, CO₂, TVOC, HCHO, Temperature, and Humidity.
- Display Mode 2 (Time/Date): Displays the current time and date.
- Display Mode 3 (Stopwatch): Provides a stopwatch function.
Switch between display modes using the designated button (refer to device interface for specific button). The 2.8-inch TFT display with backlight ensures clear visibility of all values.
2. Understanding Air Quality Readings
The device continuously monitors and displays the following parameters:
- CO₂ (Carbon Dioxide): Measured in PPM (Parts Per Million).
- CO (Carbon Monoxide): Measured in PPM.
- TVOC (Total Volatile Organic Compounds): Measured in mg/m³.
- HCHO (Formaldehyde): Measured in mg/m³.
- PM2.5, PM1.0, PM10 (Particulate Matter): Measured in ug/m³.
- Temperature: Measured in Celsius (°C) or Fahrenheit (°F).
- Humidity: Measured in percentage (%).
3. PM2.5 Data Color Warning System
The monitor provides a visual color warning for PM2.5 levels to easily indicate air quality:
- Green: 0-50 ug/m³ (Good air quality)
- Yellow: 51-100 ug/m³ (Moderate air quality)
- Orange: 101-150 ug/m³ (Unhealthy for sensitive groups)
- Red: Greater than 151 ug/m³ (Unhealthy air quality)

4. Temperature Unit Switching
The device supports switching between Celsius (°C) and Fahrenheit (°F) for temperature display. Refer to the device's menu or specific button for this function.
Maintenance
1. Cleaning
To maintain accurate readings, keep the device clean. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the device.
2. Ventilation
The monitor features a mesh design for optimal heat dissipation and accurate measurement. Ensure these ventilation areas are not obstructed during operation to prevent overheating and maintain measurement precision.
3. Battery Care
Recharge the device when the low power alert is displayed. Avoid completely draining the battery frequently to prolong its lifespan. Use only the provided Type-C charging cable.
Troubleshooting
- Device not turning on: Ensure the device is fully charged. Connect it to the charger and try again.
- Inaccurate readings: Ensure the device's ventilation areas are clear. Avoid placing the device near strong air currents, heat sources, or direct sunlight, which can affect sensor accuracy. Allow the device to stabilize for a few minutes after powering on or moving it to a new environment.
- Tuya Smart APP connectivity issues: Check your Wi-Fi connection. Ensure the device is within range of your Wi-Fi router. Restart both the device and your smartphone, then try reconnecting through the app.
- Display not clear: Adjust the backlight settings if available. Ensure the screen is clean and free from smudges.
Specifications
| Feature | Specification |
|---|---|
| Model | 2CO10 |
| Brand | KKMOON |
| Material | ABS |
| Display Size | 2.8 inch TFT Color Display |
| CO₂ Detection Range | 400-6000 PPM, ±50 ±15%PPM |
| CO₂ Detection Sensitivity | 1 PPM |
| TVOC Detection Range | 0-2.0 mg/m³ |
| HCHO Detection Range | 0-0.6 mg/m³ |
| PM2.5 Detection Range | 0-1000 ug/m³ |
| PM2.5 Detection Sensitivity | 1 ug/m³ |
| PM1.0 Detection Range | 0-1000 ug/m³ |
| PM10 Detection Range | 0-1000 ug/m³ |
| CO Detection Range | 0-500 PPM |
| CO Detection Sensitivity | 1 PPM |
| Temperature Measurement Range | -10℃~50℃ |
| Temperature Measurement Accuracy | ±2℃ |
| Humidity Measurement Range | 0%~99% |
| Humidity Measurement Accuracy | ±3%RH |
| Charging Mode | DC5V, 1A Type-C USB interface |
| Battery | Built-in lithium battery 2000mAh |
| Working Current | 290mA |
| Working Voltage | 3.7V |
| Item Size | 87 * 81 * 36mm / 3.42 * 3.18 * 1.42in |
| Item Weight | 157g / 5.53oz |
| Package Weight | 220g / 7.76oz |
| Package Size | 14.1 * 9.8 * 4.8cm / 5.55 * 3.85 * 1.89in |
| Certification | CE |
| Origin | Mainland China |
| Use | Household |

User Tips
- Optimal Placement: For the most accurate readings, place the monitor in a central location within the room, away from windows, doors, vents, and direct heat sources.
- Regular Monitoring: Use the Tuya Smart APP to regularly check historical data and identify trends in your indoor air quality. This can help you understand when ventilation or other interventions might be needed.
- Understand Warnings: Pay attention to the PM2.5 color warning system. If the reading is consistently in the orange or red zone, consider improving ventilation or using an air purifier.
- Battery Life: To maximize battery life, consider keeping the device plugged in when not actively being moved or if continuous monitoring is desired.

Warranty and Support
Warranty Information
All items come with a 1-year guarantee from the date of purchase. This warranty covers manufacturing defects and ensures that the product meets merchantable quality and fitness for purpose. If your purchase does not meet these standards, we will work to resolve the issue.
Contact Support
For any questions, technical assistance, or warranty claims, please contact our customer support team. Provide your model number (2CO10) and a detailed description of the issue for prompt service.
Customer Service: [Insert Seller Contact Information Here, e.g., email, website, phone number]