Introduction
The POLVCDG X6 Bone Conduction Earphones are designed for active lifestyles, offering a unique audio experience through bone conduction technology. With IPX8 waterproofing and 32GB of built-in memory, these earphones are ideal for swimming, running, cycling, and other sports, allowing you to enjoy music without the need for a connected phone. This manual provides detailed instructions on how to set up, operate, and maintain your X6 earphones.
Package Contents
Please check the box for the following items:
- 1 x POLVCDG X6 Bone Conduction Earphones
- 1 x Magnetic Data Charging Cable
- 1 x User Manual

Product Overview
Familiarize yourself with the components and controls of your POLVCDG X6 earphones:
Diagram and Components
- Power Button
- Plus Button (+)
- Minus Button (-)
- Microphone
- Indicator Light
- Magnetic Charging Pin
- Magnetic Data Charging Cable
- Built-in Storage Card


Product Video
Setup
Charging the Earphones
Before first use, fully charge your earphones. When the headset prompts "Low power", it indicates that the battery is low and needs charging.
- Connect the magnetic data charging cable to the magnetic charging pins on the earphones.
- Connect the other end of the cable to a 5V 1A or 5V 2A charger. Do not use fast chargers.
- The indicator light will be solid red during charging and turn solid green when fully charged.
- The anti-dull magnetic suction charging port is designed to ensure proper connection. If it does not automatically suction close, please check if it is in the correct position.

Power On/Off
- Power On: Press and hold the Power Button for approximately 3 seconds. The indicator light will flash white and blue alternately, indicating the earphones are powered on.
- Power Off: Press and hold the Power Button for approximately 3 seconds. The indicator light will turn off.
Bluetooth Pairing
For first-time use, the earphones will automatically enter Bluetooth pairing mode after being powered on. For subsequent pairing or changing devices:
- Ensure the earphones are powered on. The indicator light will flash white and blue alternately, indicating pairing mode.
- On your smartphone or Bluetooth-enabled device, go to Bluetooth settings and search for available devices.
- Select "X6" from the list to connect.
- Upon successful connection, the indicator light will flash blue slowly. It will turn off when music is playing.
- To change paired devices, first disconnect from the current Bluetooth device. The earphones will re-enter pairing mode (white and blue alternating flash), allowing other devices to find and connect to "X6".
Downloading Music to Internal Memory (MP3 Mode)
The X6 earphones feature 32GB of built-in storage for MP3 mode, allowing you to listen to music without a connected device.
- Connect the earphones to your computer using the provided magnetic data charging cable.
- After approximately 5 seconds, a new "U disk" (removable drive) icon will appear on your computer.
- Open the U disk.
- Locate your desired MP3 format music files on your computer.
- Drag and drop the MP3 files into the U disk folder.
- Once the transfer is complete, safely eject the U disk from your computer.

Operating Instructions
Button Functions
| Button | Action | Function | Notes |
|---|---|---|---|
| Power Button | Press and hold for 3s | Power On/Off | |
| Power Button | Press twice consecutively | Switch MP3/Bluetooth Mode | Requires songs on internal memory for MP3 mode. |
| Power Button | Short press (incoming call) | Answer Call | |
| Power Button | Short press (during call) | Hang Up Call | |
| Plus Button (+) | Short press | Increase Volume | |
| Plus Button (+) | Press twice consecutively | Next Track | |
| Plus Button (+) | Long press | Activate Smart Voice Assistant | Not valid in MP3 mode. |
| Minus Button (-) | Short press | Decrease Volume | |
| Minus Button (-) | Press twice consecutively | Previous Track | |
| Minus Button (-) | Long press | Enter Game Mode (35ms low latency) | Not valid in MP3 mode. |
| Minus Button (-) | Press three times consecutively | Switch Chinese/English Voice Prompts | Not valid in MP3 mode. |
Indicator Light Status
- Red and Blue alternately: Bluetooth pairing status.
- Blue slow flash: Connected, waiting to play in Bluetooth mode.
- Red solid: Earphones are charging.
- Green solid: Earphones are fully charged.
- Blue flashing: Data transfer mode (when connected to a computer).
- Green flashing: MP3 mode, waiting to play.
- Blue breathing: Bluetooth game low latency mode.
Maintenance
To ensure the longevity and optimal performance of your POLVCDG X6 earphones, please follow these maintenance guidelines:
- Store the earphones in a cool and dry place. The recommended working temperature is 0-45°C.
- If the earphones have not been used for a long time, fully charge them at least once a month.
- While the earphones are IPX8 waterproof, avoid prolonged soaking in seawater or saltwater. After use in water, especially saltwater, rinse them thoroughly with clean fresh water and dry them completely.
- After each exercise session, clean any water or sweat from the surface of the earphones, paying special attention to the charging magnet position. Timely cleaning prevents corrosion from sweat and saltwater, which can affect the product's service life.
- Keep the product away from fire, high temperatures, freezing conditions, and harsh chemicals.
- Do not attempt to disassemble or violently impact the product.
- Always use a 5V 1A or 5V 2A charging adapter. Do not use fast chargers, as this can damage the earphones.
- Do not charge the earphones in a moist environment.
- Avoid using the earphones while they are charging.

User Tips
- For optimal sound quality and comfort, ensure the earphones are positioned correctly on your ears. Wearing and removing the headset with both hands can help maintain its shape and fit.
- If you plan to use the MP3 mode frequently, remember to regularly transfer your favorite music files to the 32GB internal storage.
- When switching between Bluetooth and MP3 modes, a quick double-press of the power button is all it takes.
- The low-latency game mode can significantly enhance your gaming experience by reducing audio delay. Activate it with a long press of the Minus (-) button.
- Always ensure the charging pins are clean and free of foreign objects for reliable charging and data transfer.
Troubleshooting
- Cannot switch to MP3 mode: Ensure there are songs on the built-in storage card. If the card is empty, MP3 mode cannot be activated.
- No sound in MP3 mode: Check if the volume in MP3 mode is turned up.
- Earphones cannot charge or transfer data: Inspect the magnetic charging pins and earphone contacts for any foreign objects or dirt. Wipe them clean and try again.
- Water usage (bathing/swimming): The earphones support bathing and swimming. However, it is recommended that the water depth does not exceed 1.5 meters.
- Data cannot be transferred normally: Confirm if there is dirt on the charger pins and earphone contacts. Wipe them clean for normal operation.
Specifications
| Feature | Detail |
|---|---|
| Model | X6 |
| Headphone Type | True Bone Conduction |
| Bluetooth Version | 5.3 |
| Transmission Distance | Up to 10 meters |
| Battery Capacity | 180mAh |
| Charging Input | 5V/100mA |
| Battery Life | Up to 10 hours (at 70% volume in Bluetooth mode) |
| Internal Memory | 32GB |
| Headphone Weight | 28g |
| Waterproof Rating | IPX8 (Full waterproof design) |
| Charging Time | Approx. 2 hours |
| Talk Sensitivity | -42dB |
| Supported Protocols | A2DP, AVRCP, HSP, HFP |
| Material | PVC, ABS, Plastic, TPU, Silica Gel |
| Features | Waterproof, With microphone, Amazon Alexa Support, Apple Siri Support, Detachable Cable, Dual Connection, Playback Control, Google Assistant Support, Voice assistant built-in, NFC Technology, Volume Control, Control Button, Support APP, Support Memory Card |

Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or the official POLVCDG customer service. Please refer to your purchase documentation for specific warranty terms and contact information.