1. Introduction
The NETUM ZSS-2 is a versatile 3-in-1 wireless barcode scanner designed for efficient and reliable scanning of both 1D and 2D barcodes. It supports multiple connection modes including Bluetooth, 2.4GHz wireless, and USB wired, offering flexibility for various applications. With its compact design and robust features, the ZSS-2 is an ideal solution for point-of-sale (POS), inventory management, and other data capture needs.

2. Package Contents
- NETUM ZSS-2 Barcode Scanner
- Mini USB Receiver (for 2.4GHz wireless mode)
- USB Cable (for charging and wired connection)
- User Manual (this document)
3. Setup
3.1 Charging the Scanner
Before initial use, fully charge the scanner using the provided USB cable. Connect the small end of the USB cable to the scanner's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator will show the charging status.
3.2 Connection Modes
The ZSS-2 scanner supports three connection methods:
- USB Wired Connection: Connect the scanner directly to your computer using the USB cable. The scanner will function as a plug-and-play device, requiring no additional drivers.
- 2.4GHz Wireless Connection: Insert the Mini USB Receiver into an available USB port on your computer. The scanner will automatically pair with the receiver. This mode is incompatible with the Bluetooth function simultaneously.
- Bluetooth Connection:
- Ensure the scanner is powered on.
- Activate Bluetooth on your host device (computer, tablet, smartphone).
- Search for available Bluetooth devices and select 'NETUM ZSS-2' (or similar name) to pair.
- Follow any on-screen prompts to complete the pairing process.
4. Operating Instructions
4.1 Basic Scanning
Point the scanner's window at the barcode you wish to scan. Press the trigger button. A successful scan will typically be indicated by a beep and/or a light indicator. The scanner can read both 1D and 2D codes from paper and digital screens.

4.2 Working Modes
The scanner supports two primary working modes:
- Real-time Transmission Mode: In this mode, scanned barcodes are immediately transmitted to the connected device. This is the default mode for all connection types (USB, 2.4GHz, Bluetooth).
- Offline Storage (Inventory) Mode: The scanner has a built-in 16MB flash memory, capable of storing over 50,000 barcodes when out of range or disconnected. To activate this mode or upload stored data, you will need to scan specific configuration barcodes (refer to the 'Troubleshooting' section for data upload).

4.3 Transmission Range
The effective transmission range varies by connection type and environment:

5. Maintenance
5.1 Cleaning
To maintain optimal performance, keep the scanner's scanning window clean. Use a soft, dry, lint-free cloth to gently wipe the surface. Avoid using abrasive cleaners or solvents that could damage the device.
5.2 Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the scanner regularly, especially if it will be stored for an extended period. Store the scanner in a cool, dry place.
6. Troubleshooting
If you encounter issues with your NETUM ZSS-2 scanner, refer to the following common problems and solutions:
- Some barcodes cannot be read:
- Ensure the barcode is clean, clear, and not damaged.
- Digital barcodes on phones/tablets can be read by the ZSS-2's CMOS sensor (2D capability), but some older laser scanners might not read them.
- Certain barcode types (e.g., MaxiCode, Interleaved 2 of 5) may be disabled by default. You might need to scan specific configuration barcodes to enable them. Contact customer service if you need assistance with enabling specific symbologies.
- Data cannot be sent to my computer:
- Verify that the scanner is not in offline storage (inventory) mode. In this mode, scans are stored internally.
- To transmit stored data, scan the 'Manual data upload' barcode (refer to the full manual or contact support for this specific barcode).
- Messy code problem with foreign languages:
- The default language setting is English. If you are scanning barcodes with characters from other languages and experiencing garbled output, you may need to change the scanner's language setting. Refer to the 'Language Setting' chapter in the comprehensive manual or contact customer service for the relevant configuration barcodes.
- No 'Enter' suffix after scanning:
- To add or remove an 'Enter' (carriage return) suffix after each scan, you will need to scan specific 'Common Function Barcodes'. These barcodes are typically found in the full product manual or can be provided by customer service.

7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NETUM |
| Model Number | ZSS-2 |
| Product Type | Bar Code Scanner |
| Type | Barcode Scanner |
| Connection Modes | Bluetooth, 2.4GHz Wireless, USB Wired |
| Signal Connection Type | Bluetooth |
| Interface Type | USB |
| Scanning Light Source | Natural Light + LED |
| Scan Element Type | CMOS |
| Optical Resolution | 600*600 |
| Scan Speed | 100 scans/second |
| Colour Depth | 32 Bit |
| Scan Breadth | A4 |
| Memory | 16MB flash memory (stores >50,000 barcodes) |
| Battery | 1200mAh Li-Ion (up to 100,000 scans per charge) |
| Dimensions (LWH) | 105mm x 42mm x 25mm |
| Weight | 66g |
| 2.4GHz Wireless Range | Max 100m/330ft (barrier-free), 30m/99ft (with barrier) |
| Bluetooth Range | Max 50m/164ft (barrier-free), 20m/66ft (with barrier) |
| 1D Symbologies | Code 11, Code 93, MSI, Code 128, UCC/EAN-128, Code 39, EAN-8, EAN-13, UPC-A, ISBN, Industrial 25, Interleaved 25, Standard 25, 2/5 Matrix |
| 2D Symbologies | PDF417, Micro PDF417, Data Matrix, QR Code, Micro QR, Aztec, MaxiCode |
| Compatible Systems | Windows, MAC OS (works with Quickbook, Word, Excel, Novell, and common software) |
| Certifications | CE, FCC |
| Origin | Mainland China |


8. User Tips
- Enable Specific Barcodes: If you encounter barcodes that are not scanning, it's possible that their specific symbology is disabled by default. Consult the full manual for configuration barcodes to enable less common types like MaxiCode or Interleaved 2 of 5.
- Offline Data Management: When using the scanner in offline (inventory) mode, remember to scan the 'Manual data upload' barcode to transfer all stored scans to your connected device. Otherwise, the data will remain in the scanner's internal memory.
- Language Settings: For environments requiring non-English character support, ensure the scanner's language setting is correctly configured to avoid 'messy code' output. Refer to the 'Language Setting' section in the complete manual for instructions.
- Suffix Configuration: To customize whether an 'Enter' (carriage return) or other suffix is added after each scan, use the 'Common Function Barcodes' provided in the detailed manual.
9. Warranty and Support
NETUM products are manufactured to high-quality standards. For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact NETUM customer support. Keep your purchase receipt as proof of purchase.