4DRC 4D-V9

Contents

4DRC V9 Mini Drone User Manual

Model: 4D-V9 | Brand: 4DRC

1. Important Safety Warnings

Please read all warnings and instructions carefully before use to ensure safe operation and prevent damage or injury.

  • The packaging and instructions contain important information and should be kept for future reference.
  • Ensure no harm is caused to persons or property during operation.
  • Commissioning and installation must strictly follow operating instructions. Maintain a distance of 2 to 3 meters from people to prevent injury.
  • The manufacturer and distributors are not responsible for any loss, damage, or injury caused by improper use or operation.
  • Children under 14 years old must be guided by adults when operating the aircraft.
  • Install and use correctly; some parts may require adult assembly.
  • This product contains small parts. Keep out of reach of children to prevent accidental ingestion or suffocation.
  • Do not operate in areas with water accumulation or on roads to avoid accidents.
  • Store packing materials properly to avoid harm to children.
  • Do not disassemble or modify the aircraft, as this may cause malfunction.
  • The charging cable must be inserted into a designated 5V ≈ 2A power supply. Using other charging cables may damage the battery and cause unexpected dangers.
  • The charging cable is not a toy.
  • Rechargeable batteries must be charged under adult supervision, away from flammable materials. Do not leave unattended during charging.
  • Do not short-circuit or squeeze the battery to avoid explosion.
  • Do not mix different types of lithium batteries.
  • The aircraft uses a rechargeable lithium battery, which needs to be removed for charging.
  • Do not short-circuit, decompose, or throw the battery into fire. Avoid high temperatures or heat sources.
  • Operate the aircraft away from other electrical equipment and magnetic objects to prevent interference.
  • Maintain a safe distance from high-speed rotating propellers to avoid injury.
  • The motor is a hot part; avoid touching it to prevent burns.
  • LEDs emit laser radiation; do not direct the beam at others.
  • Do not use the model near your ears; misuse may cause hearing damage.
  • The USB charging cable provided by the company must be used to charge the battery.
  • Adhere to aeronautical radio station requirements. Stop remote control use in city areas as required by state departments.
  • Turn off the switch and unplug the battery when the aircraft battery is depleted. Charge after 30 minutes of rest to prevent battery damage.

2. Product Overview

2.1 List of Accessories Included

The 4DRC V9 Mini Drone package includes the following items:

4DRC V9 Mini Drone and included accessories

Image: 4DRC V9 Mini Drone and included accessories, including remote control, charging cable, spare blades, protective frame, screwdriver, body battery, and manuals.

  • Aircraft ⨯1
  • Remote Control ⨯1
  • 3.7V 800MAH Lipo Battery ⨯1
  • USB Charging Cable ⨯1
  • Spare Blade ⨯4
  • Protection Cover ⨯4
  • Screwdriver ⨯1
  • Operating Instructions ⨯1
  • App Manual ⨯1

2.2 Name of Each Part of Aircraft

Familiarize yourself with the different components of your 4DRC V9 Mini Drone:

4DRC V9 Mini Drone with labels for 4K Ultra Clear Dual Camera Switch, Mini Folding, Steady Hover features.

Image: Diagram of the 4DRC V9 Mini Drone highlighting features like 4K Ultra Clear Dual Camera Switch, Mini Folding, and Steady Hover.

Close-up of the drone's dual cameras, showing 4K Front (16 million pixels) and 1080P Bottom set (Switchable viewing angle).

Image: Close-up of the drone's dual cameras, showing 4K Front (16 million pixels) and 1080P Bottom set (Switchable viewing angle).

  • Motor: Powers the propellers.
  • Battery: Provides power to the drone.
  • Fan Blade: Propellers for flight.
  • Protective Ring: Guards the propellers from impact.
  • Shell: The main body of the drone.
  • LED Lights: Indicator lights for status and visibility.
  • Camera: Front-facing camera (4K or 1080P depending on model).
  • Bottom Camera: Downward-facing camera (1080P).

2.3 Remote Control Parts

Remote control guide with labeled functions including speed control, throttle lever, steering rod, indicator light, 360 roll, one-click take-off, emergency stop, headless/return.

Image: Remote control guide with labeled functions including speed control, throttle lever, steering rod, indicator light, 360 roll, one-click take-off, emergency stop, headless/return.

  • Accelerate: Increases speed.
  • Throttle/Left and Right Lever: Controls altitude and yaw.
  • Switch: Power switch.
  • Advance Fine-tuning: Adjusts forward drift.
  • Left Fine-tuning: Adjusts left drift.
  • Reverse Fine-tuning: Adjusts backward drift.
  • Right Fine-tuning: Adjusts right drift.
  • 360° Roll: Initiates a 360-degree flip.
  • Advance/Reverse/Left/Right Control Lever: Controls pitch and roll.
  • Indicator Light: Shows remote control status.
  • One Key Rotation (short press)/One Key Circling Around (long press): Performs rotation or circling.
  • One-key Take-off/One-key Landing: Initiates automatic take-off or landing.
  • Emergency Stop (short press)/One-key Calibration (long press): Stops motors or calibrates gyroscope.
  • Headless Mode (short press)/One Key Return (long press): Activates headless mode or returns the drone.

3. Setup Instructions

3.1 Unfolding the Aircraft

Follow these steps to unfold your drone:

Drone folding design, showing expanded and folded dimensions of 12.5x13x3.5cm and 8x6x3.5cm respectively.

Image: Drone folding design, showing expanded dimensions of 12.5x13x3.5cm and folded dimensions of 8x6x3.5cm.

Unfold the aircraft in the order shown in the diagram (refer to the manual for detailed steps if needed).

3.2 Installing the Protection Ring

Align the parts of the protective frame with the arm tunnel as shown in the figure, and then confirm that it is installed in place before flying to avoid falling during the flight.

Note: Please be sure to install the protective ring before flying!

3.3 Wind Blade Installation

If a fan blade is broken, replace it with a spare. Ensure correct installation to avoid flight issues.

Note: The fan blades are printed with letters A1/A2 and B1/B2. Install them correctly according to the diagram, otherwise, the drone cannot take off.

3.4 Lithium Battery Charging

1. Press and hold the aircraft battery and slide it out.

A single 3.7V 800mAh Lipo Battery for the 4DRC V9 Mini Drone.

Image: A single 3.7V 800mAh Lipo Battery for the 4DRC V9 Mini Drone.

2. Insert the USB port of the USB charging cable into a computer USB port or use a 5V ≈ 2A power adapter. Connect the other end of the USB charging cable to the battery socket.

3. When charging, the red indicator on the USB is off. When the battery is fully charged, the red indicator light will turn on, indicating charging is complete.

Warning: It must be charged with the aircraft charging cable provided by the factory. Other charging cables cannot be used and may cause serious damage to the battery.

3.5 Remote Control Battery Installation

1. Remove the battery cover on the back of the remote control.

2. According to the polarity instructions inside the battery compartment, insert 3 x AAA batteries (not included).

Note: Ensure correct polarity. Do not mix old and new batteries or different types of batteries.

4. Pre-Flight Preparation

4.1 Environmental Requirements

For optimal and safe flight, choose an outdoor and open environment with no rain, snow, or strong wind. Stay away from crowds, trees, wires, tall buildings, airports, and signal transmission towers. Avoid flying in small indoor environments with many obstacles.

4.2 Remote Control Pre-Flight Steps

  1. Turn on the power of the aircraft and place it on a horizontal surface. The aircraft will automatically enter code-matching state, and the front white light and rear red light will flash.
  2. Long press the power switch button of the remote controller. The power indicator will flash.
  3. Push the throttle lever upward to the top and then push it to the end. The frequency is successfully matched, and the drone's lights will stop flashing and turn on normally.

Note: Set the aircraft in a correct direction, with the nose facing forward. It must be placed on a horizontal plane. Ensure both aircraft and remote control have sufficient power.

4.3 Horizontal Calibration (Remote Control)

Long press the calibration key on the remote controller. The LED lights on the aircraft will flash. When the LED lights become solid, calibration is complete, and the remote controller will emit a "beep" sound.

Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.

4.4 APP Pre-Flight Steps

  1. Turn on the power of the aircraft and place it on a horizontal surface. The aircraft will automatically enter code-matching state, and the front white light and rear red light will flash.
  2. Turn on the WiFi function on your mobile device. Select "4DRC********" from the WiFi list and connect.
  3. Open the "4D FLY" APP. Click OFF, then turn on the touch rocker. The aircraft lights will turn on normally, indicating successful frequency matching.

Note: Set the aircraft in a correct direction, with the nose facing forward. It must be placed on a horizontal plane.

4.5 Horizontal Calibration (APP)

In the APP interface, click the "correction" icon. The LED lights on the aircraft will flash. When the LED lights become solid, calibration is complete.

Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.

5. Operating Instructions

Always follow the pre-flight steps (power on, frequency matching, horizontal calibration) before attempting take-off.

5.1 Basic Remote Control Operation

Remote control guide with labeled functions including speed control, throttle lever, steering rod, indicator light, 360 roll, one-click take-off, emergency stop, headless/return.

Image: Remote control guide with labeled functions.

  • Left Joystick (Throttle):
    - Push up: Aircraft rises (main blade rotation rate increases).
    - Push down: Aircraft descends (main blade rotation rate slows down).
    - Push left: Aircraft nose turns left.
    - Push right: Aircraft nose turns right.
  • Right Joystick (Rudder):
    - Push up: Aircraft moves forward.
    - Push down: Aircraft moves backward.
    - Push left: Aircraft fuselage deviates left.
    - Push right: Aircraft fuselage deviates right.

5.2 One-Key Take-off and Landing

After frequency matching, lightly press the remote control "one-key take-off/landing" button. The aircraft will automatically rise to about 1 meter and hover. Press the button again to land the aircraft slowly.

5.3 Start/Stop

Push the left control lever on the remote control upward to take off. After take-off, all indicator lights will be on. During flight, short press the stop key to stop flying.

Note: This function is for uncontrolled states. Under normal circumstances, it is recommended to use the one-key take-off/landing key.

5.4 360° Roll

The aircraft can perform 360-degree flips. For best results, ensure a height of about 1.5 meters from the ground and perform the roll during ascent to maintain height.

  • 360° Roll Left: Short press the 360° roll button, then push the right joystick to the left.
  • 360° Roll Right: Short press the 360° roll button, then push the right joystick to the right.
  • Roll Forward 360°: Short press the 360° roll button, then push the right joystick upward.
  • Roll Backward 360°: Short press the 360° roll button, then push the right joystick downward.

5.5 Headless Mode

When code-matching, the drone's front is set as the front in headless mode. To adjust direction, restart code-matching, then short press the "headless mode" function key on the remote control (or APP). Tap again to exit.

Special Prompt: Ensure the aircraft is aligned with a straight line and let the gyroscope automatically detect it for straight line headless flight.

5.6 Speed Switching

When the aircraft takes off, it defaults to low-speed mode. Gently press the speed switch button on the remote control (or click the "30%" icon in the APP) to cycle through low, medium, and high speeds (indicated by 1, 2, or 3 beeps).

5.7 Fine Tuning

If the aircraft drifts during flight, use the fine-tuning buttons on the remote control (or APP) to correct its movement.

  • Forward/Backward Fine-tuning: If the aircraft deviates backward, press the forward fine-tuning key. If it deviates forward, press the backward fine-tuning key.
  • Left/Right Fine-tuning: If the aircraft deviates right, press the left fine-tuning key. If it deviates left, press the right fine-tuning key.

5.8 One-Key Return

To recall the aircraft when it's far away, long press the "Return" key on the remote control. The remote control will beep, and the aircraft will automatically fly back. Operating the right rocker arbitrarily will release the return function.

5.9 APP Control Interface

Screenshot of the 4DRC V9 Mini Drone APP control interface with various labeled functions like speed gear, fixed height mode, gravity sensor control, menu, VR mode, lighting control, headless mode, calibrated gyroscope, throttle control, flight control, one key take off/landing, fine tuning, emergency stop, voice control, and interface settings.

Image: Screenshot of the 4DRC V9 Mini Drone APP control interface with various labeled functions.

The APP interface provides comprehensive control and features:

  • Media Library: Access recorded photos and videos.
  • Record Video: Start/stop video recording.
  • Take Pictures: Capture still images.
  • Return: One-key return function.
  • Camera Switch: Toggle between front and bottom cameras (for dual-camera models).
  • 360° Roll: Perform 360-degree flips.
  • Orbit Flight: Draw a flight path for autonomous flight.
  • Throttle Control: Adjust altitude.
  • Advance and Reverse Fine-tuning: Correct forward/backward drift.
  • Left and Right Rotation Control: Adjust yaw.
  • One Key Take Off/Landing: Automatic take-off and landing.
  • Left and Right Rotating Fine-tuning: Correct left/right drift.
  • Emergency Stop: Immediately stop motors.
  • Voice Control: Control via voice commands.
  • Fixed Height Mode: Maintain a stable altitude.
  • Gravity Sensor Control: Control by tilting your phone.
  • Show/Hide Control Interface: Toggle visibility of on-screen controls.
  • Menu: Access additional settings.
  • Rotate the Image: Rotate the FPV feed.
  • VR Mode: For use with VR 3D glasses.
  • Lighting Control: Turn drone lights on/off.
  • Headless Mode: Activate/deactivate headless mode.
  • Calibrated Gyroscope: Perform horizontal calibration.
  • Interface Settings (Right-handed Mode): Adjust control lever orientation for left or right-handed users.

5.10 Gesture Recognition

When the preview screen is displayed in the APP, click the gesture control button to activate. Face the lens from about 2-3 meters away in good lighting.

Person making a 'V' gesture for gesture photo/video feature.

Image: Person making a 'V' gesture for gesture photo/video feature.

  • OK (Right Hand) Gesture Photographing: Stand 3m in front of the lens, make an OK gesture with your right hand. The aircraft will take a photo after a 3-second countdown.
  • V Gesture Recording: Stand 3m in front of the lens, make a V gesture. The aircraft will start recording. Make another gesture to stop recording (interval should be longer than 3 seconds).

5.11 Orbit Flight

In the APP, when the control switch is on, click the track flight button to open the drawing board. Draw a flight path with your finger, and the aircraft will follow the drawn path.

6. Specifications

FeatureSpecification
Model Number4D-V9
Brand Name4DRC
Drone WeightAbout 33g
Takeoff WeightAbout 60g
Dimensions (Expanded)12.5 x 13 x 3.5cm
Dimensions (Folded)8 x 6 x 3.5cm
Video Capture Resolution1080p FHD, 4K UHD (Optional)
Camera Mount TypeFixed Camera Mount, Other
Flight Time10~20 minutes (approx. 15 minutes)
Charging TimeAbout 40 minutes
Remote DistanceAbout 80 meters (FPV Distance: 50m)
Flight Height<120m
Maximum Flight Speed≤19m/s
Battery3.7V 800MAH Lipo Battery (Included)
Charging Voltage3.7V
Controller Battery3 x 1.5 AAA Battery (not included)
Control Channels4 channels
Controller ModeMODE2
Motor TypeBrush Motor
Indoor/Outdoor UseIndoor-Outdoor
FeaturesApp-Controlled, Aerial Photography, Altitude Hold Mode, Headless Mode, One-Button Auto Return, WiFi FPV, 360° Roll, Gesture Control
MaterialPlastic, Metal
State of AssemblyReady-to-Go
Recommend Age14+y
CertificationCE

7. Troubleshooting

QuestionReasonSolution
The aircraft indicator flashes without any responseThe aircraft has insufficient powerCharge the battery
The blades of the aircraft rotate but cannot fly1. Low battery
2.1 Blade deformation
2.2 Installation error of AB propeller
1. Charge the battery
2.1 Replace the blade
2.2 The fan blades are printed with letters A and B. For fan blade A or B, replace the one that is broken.
The aircraft vibrates badlyBlade deformationReplace the blade
After the impact, start the aircraft again and it flies uncontrollably1. Blade deformation
2. Defective motor
1. Replace the blade
2. Replace the motor
After the impact, start the aircraft again and it flies uncontrollablyThe three-axis acceleration sensor loses its balance due to impactAfter leaving the aircraft for 5-10 seconds, or by the horizontal calibration, it will be ok. For the steps, please refer to the manual, 10.3 horizontal calibration operation.

8. Maintenance

  • Regularly inspect the drone for any damage to propellers, protective rings, or the body. Replace damaged parts immediately.
  • Keep the drone and its components clean and free from dust and debris.
  • Store the drone in its original box or a protective case when not in use.
  • Do not immerse the battery in water. Store the battery in a dry place.
  • Do not leave the battery unattended when charging.
  • Turn off the drone and remote control when not in use to conserve battery life.

9. User Tips

  • Extended Flight Time: The drone's flight time is approximately 10-15 minutes per charge. For longer flying sessions, consider purchasing additional batteries.
  • APP Compatibility: The drone functions with the "4D FLY" application. Ensure you download the correct app from your device's app store using the provided QR codes.

10. Warranty and Support

This product comes with a 30-day warranty.

For further assistance or support, please refer to the official user manual PDF available at: 4DRC V9 Mini Drone User Manual (PDF)

© 2024 4DRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.