Introduction
The Lemorele R200 Wireless HDMI Transmitter and Receiver Kit provides a reliable and efficient solution for wireless video and audio transmission. Designed for professional use in live streaming, camera monitoring, and extending PC displays to TVs, this kit eliminates the need for long HDMI cables, offering flexibility and a tidy workspace. With its plug-and-play functionality, built-in cooling fan, and OLED display, the R200 ensures high-quality 1080p video transmission with minimal latency.
Figure 1: Lemorele R200 Wireless HDMI Transmitter and Receiver Kit
Key Features
- Plug & Play: No driver installation required. Features a built-in fan for cooling and an OLED display for status monitoring.
- Flexible Configuration (1TX to 4RX): Supports one Transmitter (TX) to up to four Receivers (RX) simultaneously.
- Extended Range & Low Latency: Transmits video and audio up to 200 meters (656 feet) with a low latency of 0.08 seconds (80ms), ensuring real-time monitoring and efficient live production.
- Multiple Power Supply Options: Compatible with Sony NP-F970/750/550 series batteries, 12V DC power supply, and 5V/2A USB-C power supply.
- New Design & OLED Display: Ergonomic landscape design with an integrated cold shoe mount and a clear OLED display for comprehensive equipment status.
- High Definition Support: Supports 1080p@60Hz HD signal transmission.
Package Contents
Please check the box for the following items:
- 4400mAh Battery x2
- Cold Shoe x1
- HDMI Converter x2
- Power Adapter x2
- HDMI Cable x2
- USB-C Cable x2
- User Manual x1
Figure 2: Package Contents
Setup Instructions
- Unpack and Inspect: Carefully remove all components from the packaging and verify against the package contents list.
- Attach Antennas: Screw the antennas firmly onto both the Transmitter (TX) and Receiver (RX) units.
- Powering the Units: Each unit (TX and RX) requires power. Choose one of the following methods:
- NP-F Battery: Slide a charged Sony NP-F970/750/550 series battery into the battery slot on the back of the unit.
- DC Power: Connect the provided 12V DC power adapter to the DC Power port on the unit and plug it into a power outlet.
- USB-C Power: Connect a 5V/2A (minimum) USB-C power source to the USB-C port on the unit.
Figure 3: Power Supply Options
- Connect Transmitter (TX):
- Connect your video source (e.g., camera, PC, game console, ATEM switcher) to the HDMI IN port on the TX unit using an HDMI cable.
- If local monitoring is desired, connect a monitor to the HDMI OUT port on the TX unit.
- Connect Receiver (RX):
- Connect your display device (e.g., projector, monitor, HD TV) to the HDMI OUT port on the RX unit using an HDMI cable.
Figure 4: TX and RX Port Connections
- Mounting (Optional): Use the integrated cold shoe mount to attach the TX or RX unit to a camera or other compatible equipment.
Operating Instructions
- Power On/Off: Press and hold the 'OFF/ON' button on each unit to power them on or off.
- OLED Display: The OLED screen on both units will display important information such as the current channel (e.g., CH044), connection status (CNCT), battery level, and signal quality.
- Automatic Connection: The TX and RX units are designed for plug-and-play operation and should automatically establish a connection. Monitor the 'CNCT' status on the OLED display to confirm a successful link.
- Channel Selection: If interference occurs or you need to change the transmission channel, navigate the menu using the buttons next to the OLED display. Select 'Switch Channel' to choose an alternative.
- Transmission Modes:
- 1 TX to 1 RX: Provides the maximum transmission distance of 200m (656ft).
- 1 TX to Multiple RXs: The system supports up to 4 receivers. Note that increasing the number of receivers will reduce the effective transmission distance:
- 1 TX to 2 RXs: 60m (196ft)
- 1 TX to 3 RXs: 30m (98ft)
- 1 TX to 4 RXs: 20m (65ft)
Figure 5: Multiple Receiver Configuration
- Monitoring Signal Quality: The OLED display shows the 'Quality' of the signal. If the quality is low, consider adjusting the position of the units or changing the channel.
Video 1: Lemorele R200 Product Overview and Usage Examples
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the units. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If using NP-F batteries, ensure they are charged regularly and stored properly to prolong their lifespan. Avoid fully discharging batteries for extended periods.
- Fan Maintenance: The built-in fan helps with cooling. Ensure the fan vents are not obstructed during operation.
Figure 6: Built-in Cooling Fan
Troubleshooting
- No Signal or Poor Signal Quality:
- Ensure both TX and RX units are powered on and properly connected.
- Verify that the HDMI cables are securely connected to both the source and display devices.
- Check for obstructions between the TX and RX units. Walls, bricks, or glass can significantly shorten signal coverage or cause severe signal loss. Maintain a clear line of sight if possible.
- Reduce the distance between the TX and RX units.
- Try changing the transmission channel via the OLED menu to avoid interference.
- No Power:
- If using batteries, ensure they are fully charged and correctly inserted.
- If using DC power, check the power adapter and wall outlet.
- If using USB-C, ensure the power source provides at least 5V/2A.
- High Latency:
- Ensure a clear line of sight between TX and RX.
- Reduce the transmission distance.
- Minimize the number of RX units if multiple are in use, as this can affect performance.
Specifications
| Feature | Specification |
|---|---|
| Model Number | R200 |
| High Definition Support | 1080p |
| Content | Audio & Video |
| Wireless Type | WiFi |
| WIFI Standard | 2.4G + 5G |
| Interface | HDMI-Compatible |
| Transmission Range (1TX to 1RX) | Up to 200m (656ft) |
| Latency | 0.08s (80ms) |
| Power Supply | Sony NP-F series batteries, 12V DC, 5V/2A USB-C |
| Cooling | Built-in Fan |
| Display | OLED Screen |
| Certification | CE, FCC, RoHS |
User Tips & Important Considerations
- RX Unit Usage: The Receiver (RX) unit cannot be used independently; it must always be paired and used in conjunction with a Transmitter (TX) unit.
- Environmental Factors: Physical obstructions such as walls, bricks, or glass can significantly reduce signal coverage and lead to severe signal loss. For optimal performance, aim for a clear line of sight between the TX and RX units.
- Power Supply Current: When using a USB-C power supply, ensure it provides a minimum of 5V/2A for stable operation.
- Drone Compatibility: While the R200 is versatile, specific integration with drone devices may require additional testing or accessories to ensure full compatibility and stable transmission. Always verify your drone's HDMI output and power requirements.
Figure 7: OLED Screen Menu
Warranty and Support
For any technical assistance, warranty claims, or product inquiries, please contact Lemorele customer support. Keep your purchase receipt as proof of purchase for warranty services.