1. Product Overview
The HUAYU RM-L1210+G Pro is a universal remote control designed for a wide range of LCD and LED Smart TVs. It offers broad compatibility with popular brands such as SHARP, SAMSUNG, SONY, Hisense, Skyworth, Haier, and Panasonic, providing a convenient replacement for multiple original remote controls.
2. Setup Instructions
2.1. Battery Installation
- Open the battery compartment cover located on the back of the remote control.
- Insert two (2) AAA batteries, ensuring correct polarity (+ and -). Batteries are not included with the remote.
- Close the battery compartment cover securely.
2.2. Pairing with Your TV
The RM-L1210+G Pro offers several methods for pairing with your television:
Method 1: Setting with Brand (Common LCD Brands)
This method uses a quick code for common TV brands.
- Press and hold the 'SET' button, then press the corresponding number button for your TV brand. The indicator light on the remote should turn on.
- Release both buttons. The indicator light should turn off, indicating successful pairing.
| Brand | Code |
|---|---|
| SONY | SET + "2" |
| SAMSUNG | SET + "3" |
| SHARP | SET + "4" |
| PANASONIC | SET + "5" |
| TOSHIBA / JVC | SET + "6" |
| PHILIPS | SET + "7" |
| HAIER | SET + "8" |
| HITACHI / SANYO | SET + "9" |
| TCL / KONKA | SET + "10" |
| WALTON | SET + "F1" |
| Other Brands | SET |
Method 2: Setting with Code (For Less Common Brands)
If your TV brand is not listed above or the previous method fails, use this method with specific codes.
- Find the appropriate three-digit code for your TV brand from the provided code list (usually on the packaging or a separate sheet).
- Press and hold the 'SET' button, then press the 'POWER' button. The indicator light on the remote will turn on.
- Enter the three-digit code. The indicator light will turn off after the last digit is entered, signifying successful setup.
Specific Codes:
- For Pensonic: Codes 226, 051
- For Devant: Codes 031, 013, 014
- For COBY: Code 015
3. Operating Instructions
Once successfully paired, your RM-L1210+G Pro remote control functions like your original TV remote. Point the remote directly at your TV and press the desired buttons.
- POWER: Turns the TV on or off.
- MUTE: Mutes or unmutes the TV sound.
- Number Buttons (0-9): Directly select channels.
- VOL +/-: Adjusts the volume up or down.
- CH +/-: Changes channels up or down.
- MENU: Accesses the TV's main menu.
- SOURCE: Selects input sources (HDMI, AV, etc.).
- Navigation Buttons (Up, Down, Left, Right, OK): Navigate through menus and confirm selections.
- RETURN/EXIT: Go back to the previous screen or exit menus.
- Playback Controls (PLAY, PAUSE, STOP, REV, FWD, PREV, NEXT): Control media playback.
- Dedicated App Buttons (NETFLIX, YouTube): Quick access to streaming services.
4. Maintenance
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or the indicator light fails to illuminate. Always use new AAA batteries and dispose of old batteries responsibly.
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the remote.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures. If not used for extended periods, remove the batteries to prevent leakage.
5. Troubleshooting
Remote Not Responding / Not Controlling TV
- Check Batteries: Ensure batteries are correctly inserted and have sufficient power. Replace them if necessary.
- Line of Sight: Make sure there are no obstructions between the remote control and the TV's IR receiver.
- Re-attempt Pairing: If the remote stops controlling your TV, try the pairing process again using one of the methods below.
Advanced Search Methods (If initial pairing fails)
Method 3: One Key Search
- Press and hold the 'SET' button until the indicator light shines continuously.
- While still holding 'SET', press the 'POWER' button. The indicator light will flash.
- Release the 'SET' button. The remote will now attempt to find a compatible code. Test functionality. If it doesn't work, repeat the process.
Method 4: One By One Search
- Press and hold 'SET' + 'POWER' simultaneously until the indicator light turns on.
- Press 'POWER' again. The indicator light will flash one by one. Observe if your TV's channel changes.
- Once your TV responds, immediately press 'SET' to save the code. If it doesn't work, repeat the process.
Method 5: Automatic Search
- Press and hold 'SET' + 'POWER' simultaneously until the indicator light turns on.
- Press 'POWER' again. The indicator light will flash one by one until the 'SET' light appears on your TV screen.
- Press 'SET' to confirm and turn off the indicator light, completing the setting.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | RM-L1210+G Pro |
| Brand Name | HUAYU (also listed as zap) |
| Use | TV |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Material | ABS Material |
| Batteries | 2 x AAA batteries (not included) |
| Color | Black |
| Operable Distance | More than 8 meters |
| Certification | CE |
| Origin | Mainland China |
7. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty details or technical support, please refer to the seller's information or contact the point of purchase. Keep your purchase receipt as proof of purchase.
8. User Tips
- Keep the original packaging or a copy of the brand code list handy for future reference, especially if you need to re-pair the remote or use it with a different TV.
- Ensure a clear path between the remote's IR emitter and your TV's IR receiver for optimal performance.
