Manuals+

Sunrei C1600

Sunrei C1600 Rechargeable Worklight

Model: C1600

Introduction

The Sunrei C1600 is a versatile and robust rechargeable worklight designed for various applications, from outdoor activities like camping to professional tasks requiring hands-free illumination. It features a powerful COB LED with multiple brightness settings, a red light mode for emergencies, and a built-in power bank function. Its durable construction, magnetic base, and rotatable stand make it an indispensable tool.

Sunrei C1600 worklight with charging cables and carrying case
The Sunrei C1600 worklight, including charging cables and a protective carrying case.

Setup

  1. Initial Charging

    Before first use, fully charge the Sunrei C1600. Connect the provided USB cable to the worklight's input port and to a compatible USB power adapter (not included). The charging inputs supported are 5V/3A, 9V/2A, or 12V/1A. A full charge typically takes approximately 5.5 to 6 hours.

  2. Power Bank Function

    The C1600 can also function as a power bank. To charge external devices, connect your device to the worklight's output port using a compatible USB cable. The output values are 5V/3A or 9V/2A, allowing you to charge smartphones, tablets, and other USB-compatible electronics.

Operating Instructions

  1. Power On/Off and Mode Selection

    Press the power button to turn the worklight on. Subsequent presses will cycle through the white light brightness modes: Low, Medium, High, and Extremely High. To activate the red light modes (Red Light, Red Strobe), press and hold the power button for a few seconds. Press again to cycle through red light modes. To turn off the light, press the power button until it cycles past all modes or hold the button down for an extended period.

    Sunrei C1600 displaying white camp light mode and red mode
    The C1600 offers both white camp light and red emergency light modes.

  2. Adjusting Light Direction

    The integrated stand allows for 180° rotation, enabling you to direct the light precisely where needed. Simply adjust the stand to your desired angle.

  3. Mounting Options

    • Magnetic Base: The base of the worklight is magnetic, allowing it to be securely attached to any metal surface for hands-free operation.
    • Integrated Hook: A convenient hook is built into the base, providing an option to hang the light from branches, ropes, or other suitable fixtures.
    • Tripod Compatibility: The C1600 can also be mounted on a standard tripod for wider area illumination.
    Sunrei C1600 features: 180 degree rotation, super strong magnet, cold resistant, and IPX5 water resistant
    Key features include 180° rotation, a strong magnet, cold resistance, and IPX5 water resistance.
    Four images showing the Sunrei C1600 in use: illuminating a tent, magnetically attached under a car hood, clipped to a backpack, and used as a roadside warning light.
    The C1600 is suitable for various scenarios, including camping, vehicle maintenance, and as a safety light.
    Sunrei C1600 mounted on a tripod for wide-angle illumination, showing 1500 lumens and 47 meters range.
    The worklight can be mounted on a tripod for wide-angle illumination, reaching up to 47 meters at 1500 lumens.

Maintenance

  • Cleaning

    Wipe the worklight with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents, as these may damage the ABS material or electronic components.

  • Storage

    Store the worklight in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, ensure the battery is partially charged (around 50%) and recharge it every 3-6 months to maintain battery health.

  • Battery Care

    The internal lithium-ion battery is designed for longevity. Avoid fully discharging the battery frequently. Recharge the device promptly when the battery indicator shows low power.

Troubleshooting

  • Light Not Turning On

    Ensure the battery is charged. Connect the worklight to a power source and allow it to charge for at least 30 minutes before attempting to turn it on again.

  • Device Not Charging

    Check the charging cable for damage and ensure it is securely connected to both the worklight and the power adapter. Try using a different USB cable or power adapter to rule out faulty accessories.

  • External Device Not Charging from Worklight

    Verify that the worklight has sufficient battery charge. Ensure the external device's charging cable is properly connected to the worklight's output port. Some devices may require specific charging protocols; if issues persist, consult your device's manual.

Specifications

Feature Detail
Power Source 3.7V/13500mAh Lithium-ion Battery
Light Source COB + Red LED
Output (Power Bank) 5V/3A, 9V/2A
Input (Charging) 5V/3A, 9V/2A, 12V/1A
Charging Time 5.5-6 hours
Waterproof Rating IPX5 (Resistant to splashes and rain)
Dimensions 98 mm x 111 mm x 44.5 mm
Weight 450 grams
Features 180° Rotation, Magnetic Base, Integrated Hook

Performance Modes

Mode Lumens Distance Runtime
Low 120LM 13M 50H
Middle 300LM 21M 21H
High 750LM 33M 8H
Extremely High 1500LM 47M 5.5H
Red Light 14LM - 15.8H
Red Strobe - - -

User Tips

  • Utilize the magnetic base for hands-free lighting during car repairs or when working on metal surfaces.
  • The red light mode is excellent for preserving night vision during camping or stargazing.
  • Keep the worklight charged, especially before outdoor trips, to ensure the power bank function is available for your mobile devices.

Warranty & Support

The Sunrei C1600 Rechargeable Worklight is manufactured to high-quality standards. For any issues or inquiries, please refer to your purchase documentation for specific warranty terms and contact information for customer support. Keep your proof of purchase for warranty claims.