Ipega PG-9777S Bluetooth Gamepad User Manual

1. Introduction

The Ipega PG-9777S is a versatile Bluetooth gamepad designed to enhance your gaming experience across multiple platforms. Featuring a stretchable design, RGB lighting, linear vibration motors, and mechanical buttons, this controller offers immersive gameplay for Nintendo Switch, Android, iOS, and PC devices.

Note: The PG-9777S model does not include a physical joystick sensitivity adjustment wheel. This feature is present in the PG-9777 model.

Figure 1: Ipega PG-9777S Mobile Armour Game Controller supporting various devices.

2. Key Features

• Multi-Platform Compatibility: Supports Nintendo Switch, Android (phones/tablets), iOS (above 13.0), and Windows PC.
• Stretchable Design: Accommodates devices with lengths from 162mm to 286mm.
• RGB Lighting: Adjustable colorful RGB light effects for an enhanced aesthetic.
• Linear Vibration Motors: Dual linear motors provide realistic and immersive haptic feedback.
• Mechanical Buttons: Equipped with a built-in rebound device for quick response and improved game speed.
• Six-Axis Gyroscope: Built-in gyroscope for precise motion control in supported games.
• Turbo Function: Auto-fire capability for rapid button presses.
• Bluetooth Wireless Connection: Seamless wireless connectivity.
• Wake-up Function: Allows waking up connected devices.

Figure 2: Overview of controller functions.

3. Setup and Connection

3.1 Initial Charging

Before first use, ensure the gamepad is fully charged. Connect the controller to a DC5V/500mA power source using the provided charging cable. The charging indicator will show the charging status and turn off when fully charged.

3.2 Device Installation

1. Gently pull the telescopic handle of the gamepad to extend it.
2. Carefully place your smartphone, tablet, or Nintendo Switch console into the central slot.
3. Ensure the device is securely seated within the handle. The handle supports devices with lengths between 162mm and 286mm.

Figure 3: Installing a device into the stretchable handle.

3.3 Bluetooth Pairing

The PG-9777S connects wirelessly via Bluetooth. The pairing method may vary slightly depending on the platform:

• Nintendo Switch:
  1. On your Switch, go to "System Settings" > "Controllers and Sensors" > "Change Grip/Order".
  2. Press and hold the pairing button on the gamepad until the indicator lights start flashing rapidly.
  3. The Switch will detect the gamepad. Once detected, select it to complete pairing.
• Android/iOS Devices:
  1. Enable Bluetooth on your Android or iOS device.
  2. Press and hold the pairing button on the gamepad until the indicator lights start flashing rapidly.
  3. On your device, search for "PG-9777S" (or similar) in the Bluetooth settings and select it to pair.
  4. For iOS, ensure your device is running iOS 13.0 or higher.
• PC (Windows):
  1. Ensure your PC has Bluetooth enabled.
  2. Press and hold the pairing button on the gamepad until the indicator lights start flashing rapidly.
  3. On your PC, go to "Bluetooth & other devices" settings, click "Add Bluetooth or other device", and select "Bluetooth".
  4. Choose "PG-9777S" (or similar) from the list of available devices to pair.

4. Operating Instructions

4.1 Basic Controls

The gamepad features standard gaming controls including directional pad (D-pad), action buttons (A, B, X, Y), joysticks, shoulder buttons (L1, R1), and triggers (L2, R2). Specific button functions may vary depending on the game and platform.

4.2 RGB Lighting Effects

The PG-9777S features adjustable RGB lighting. Use the dedicated "LIGHT" button (or similar, refer to controller layout) to cycle through different lighting modes or turn the lights on/off.

Figure 4: Cool RGB lighting effect on the controller.

4.3 Turbo Function (Auto-Fire)

The Turbo function allows for rapid, continuous pressing of a button without holding it down repeatedly. To activate:

1. Press and hold the desired action button (e.g., A, B, X, Y).
2. While holding the action button, press the "TURBO" button once.
3. Release both buttons. The action button will now auto-fire.

To deactivate the Turbo function for a specific button, repeat the steps above. To clear all Turbo settings, press and hold the "CLEAR" button (or similar) for a few seconds.

Figure 5: Turbo function for rapid firing.

4.4 Vibration Feedback

The controller features linear dual motor vibration for enhanced haptic feedback during gameplay. This provides a more immersive and realistic experience. Vibration intensity is typically controlled by the game itself.

Figure 6: Linear dual motor vibration for realistic feedback.

4.5 Six-Axis Gyroscope

The built-in six-axis gyroscope allows for motion control in games that support this feature, particularly on Nintendo Switch. This provides an additional layer of interaction and precision.

Figure 7: Built-in Six-Axis Gyroscope for motion control.

4.6 Rocker Sensitivity (PG-9777 Model Only)

Important Note: The PG-9777S model does NOT include the physical joystick sensitivity adjustment wheel. This feature is present in the PG-9777 model. For the PG-9777S, joystick sensitivity is typically managed through in-game settings or system-level controller calibration if available.

Figure 8: Adjustable rocker sensitivity dial (feature of PG-9777, not PG-9777S).

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the controller. Do not use harsh chemicals or abrasive materials.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the controller regularly, even if not in use for extended periods.
• Avoid Impact: Do not drop or subject the controller to strong impacts, as this may damage internal components.

6. Troubleshooting

7. Specifications

Figure 9: Approximate dimensions of the Ipega PG-9777S controller.

8. Warranty and Support

For warranty information and technical support, please refer to the official Ipega website or contact your retailer. Keep your purchase receipt as proof of purchase.