Introduction
The Retevis C1 is a high-performance 5W dual-band walkie talkie designed for reliable long-range communication. Featuring IP67 waterproofing, noise reduction technology, and a durable build, it is suitable for various environments from outdoor adventures to demanding work sites. This manual provides essential information for the safe and effective use of your Retevis C1 radio.

Safety Information
- Do not operate the radio in explosive atmospheres (e.g., flammable gases, dust particles, metallic powders).
- Do not transmit without an antenna attached.
- Use only approved batteries and chargers to prevent damage and ensure safety.
- Keep the radio away from medical devices to avoid interference.
- Avoid exposing the radio to direct sunlight for extended periods or extreme temperatures.
- Do not attempt to disassemble or modify the radio. Refer all servicing to qualified personnel.
Package Contents
Please check the package contents upon unboxing. The standard package includes:
- 1x C1 Walkie Talkie
- 1x 1800mAh Battery
- 1x Belt Clip
- 1x Antenna
- 1x Hand Strap
- 1x Type-C Charging Cable
- 1x Charging Base
- 1x User Manual
Optional accessories such as a Programming Cable or IP67 Waterproof Speaker Microphone may be included depending on your specific package (e.g., 2PCS package includes two of each standard item).

Product Overview
The Retevis C1 features a compact design with a 1.77-inch color screen and a full keypad for easy operation. It is equipped with an improved chip (BK4829/BK4819) for enhanced audio quality.

Setup
1. Battery Installation and Charging
Insert the 1800mAh Li-ion battery into the compartment on the back of the radio. Ensure it clicks securely into place. To charge, connect the Type-C charging cable to the radio or place the radio in the charging base. The charging indicator will show the charging status.

2. Antenna Attachment
Screw the antenna clockwise into the connector on the top of the radio until it is finger-tight. Do not overtighten.
3. Initial Power On
Press and hold the power button to turn on the radio. The 1.77-inch color screen will illuminate, displaying the current frequency and mode.
Operating Instructions
Power On/Off and Volume Adjustment
Use the power/volume knob on the top of the radio to turn it on/off and adjust the volume. Rotate clockwise to increase volume, counter-clockwise to decrease.
Channel Selection (Dual Band)
The Retevis C1 supports dual-band operation (UHF and VHF). Use the navigation keys or keypad to select desired frequencies or channels. The radio is flexible for transmitting and receiving on two channels simultaneously.

Transmitting and Receiving (PTT)
To transmit, press and hold the Push-to-Talk (PTT) button on the side of the radio and speak clearly into the microphone. Release the PTT button to receive.
VOX Hands-free Operation
The VOX function allows for hands-free transmission. To activate, navigate through the menu to find the VOX setting. Turn it ON and select a VOX level from 0-9. When VOX is active, the radio will transmit automatically when it detects your voice.

Noise Reduction
The Retevis C1 features two-way noise reduction. Access this function through the menu settings to turn it ON or OFF. This helps in achieving clearer communication in noisy environments.

Key Lock
To prevent accidental key presses, you can enable the key lock feature. This can be set to manual or automatic (e.g., auto-lock after 5s, 10s, 20s, 30s).
Frequency Measure (One-key Pairing)
This feature allows you to quickly pair with other handheld radios by measuring their frequency. Enter the frequency measuring mode via the menu, and the radio will seek signals to establish a quick connection.

Group Call
For team communication, you can set up a group call function. By pressing a pre-defined group call key, you can communicate with all members in your team simultaneously.

Emergency Alarm
In case of an emergency, the radio features a remote and local alarm function. Press the designated alarm key to alert your team members and request assistance.

Display Settings
The 1.77-inch color screen offers clear visibility in various lighting conditions. You can adjust the display type between 'Daytime Mode' and 'Night Mode' via the system configuration menu for optimal readability.

Maintenance
Cleaning
Clean the radio's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging or using in wet conditions.
Battery Care
To prolong battery life, avoid fully discharging the battery frequently. Charge the battery regularly, even if the radio is not in use for extended periods. Store the battery in a cool, dry place.
Waterproofing (IP67)
The Retevis C1 is rated IP67 waterproof, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. Ensure all covers (e.g., charging port cover) are securely closed before exposing the radio to water or dust.

Heat Dissipation
The radio is equipped with an aluminum plate for better heat dissipation, extending its service life. Ensure the back of the radio is not obstructed during prolonged use.

Troubleshooting
- No Power: Check battery level and ensure it is properly installed. Verify the charging cable and base are functioning correctly.
- Poor Audio Quality: Ensure noise reduction is enabled if in a noisy environment. Check antenna connection. Verify volume settings.
- Cannot Transmit/Receive: Check if the radio is on the correct frequency/channel. Ensure the PTT button is fully pressed when transmitting. Verify that the key lock is not engaged.
- Limited Range: Obstacles like buildings and terrain can affect range. Ensure you are within the specified operating range. High power mode (5W) should be selected for maximum range.
Specifications
| Feature | Specification |
|---|---|
| Model | C1 |
| Channels | 250 |
| Li-ion battery | 1800mAh |
| Charging | Desktop charger & Type-C charging |
| Working voltage | DC 7.4V |
| Standard Work time | 20.21h |
| Standby time | 95h |
| Screen | 1.77inch |
| Display type | Daytime & Nighttime |
| Noise reduction method | Two-way noise reduction |
| Waterproof level | IP67 |
| Dimension | 133.6*62*41.5mm / 5.38*2.44*1.63 inches |
| Maximum Range | 5km-10km |
| Frequency Band | UHF or VHF |
| Antenna type | SMA-M |
| Audio Port | Moto Contact pin |
| Usable programming cable | J9131P |

User Tips
- For advanced customization and fine-tuning of settings, consider acquiring the optional J9131P programming cable. This allows for more detailed control over frequencies, channels, and other parameters.
- The IP67 waterproof rating makes this radio excellent for outdoor activities or work in wet conditions. Always ensure all port covers are sealed to maintain water resistance.
- Take advantage of the noise reduction feature in loud environments to ensure your communications are clear and easily understood.
- The 1800mAh battery provides long operational and standby times. For optimal performance, fully charge the radio before extended use.
- The 1.77-inch color screen is designed for clarity. Adjust between 'Daytime Mode' and 'Night Mode' in the settings for best visibility in different lighting conditions.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Retevis website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.
Product Demonstration Video
Watch this video for a visual guide on the Retevis C1's features and operation: