M8 M8

Contents

M8 Auto EOBD OBD2 GPS Head-Up Display User Manual

Electronic Auto Accessories

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your M8 Auto EOBD OBD2 GPS Head-Up Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

The M8 HUD is designed to project essential driving information onto your windshield, allowing you to keep your eyes on the road and enhance driving safety. It features a multi-color display, large font size, and non-destructive installation, supporting both OBD2 and GPS data acquisition.

Package Contents

Upon unpacking, please verify that all the following items are included and undamaged:

  • 1 x M8 Digital HUD Unit
  • 1 x OBD Cable
  • 1 x Anti-Slip Mat
  • 1 x Reflective Film
  • 1 x Instruction Manual (this document)
M8 HUD package contents including HUD unit, OBD cable, anti-slip mat, reflective film, and manual.
Figure 1: M8 HUD Package Contents

Safety Warnings and Precautions

WARNING: Read all instructions carefully before using this product. Keep this manual for future reference.

  • Do not use the product for any purpose other than its intended use. Misuse may cause injury, damage to the product, or other hazards.
  • Keep this product out of the reach of children, unless under direct adult supervision. Small parts may cause choking hazard.
  • Do not disassemble, modify, or repair the product by yourself. Improper operation may cause electric shock, fire, or product failure. Contact professional maintenance personnel if needed.
  • Dispose of the product and its packaging in accordance with EU WEEE (Waste Electrical and Electronic Equipment) Directive 2012/19/EU and RoHS Directive 2011/65/EU. Do not discard as household waste.
  • Do not use the product near water or in humid environments. Avoid contact with liquids to prevent electric shock. Unplug the power supply when not in use or during cleaning.
  • Protective equipment should be worn. This product is not intended to be used in traffic in a way that distracts the driver.

Installation

The M8 HUD offers a non-destructive installation process. Follow these steps for proper setup:

  1. Connect the OBD Socket: Locate your vehicle's OBD2 socket, typically found under the steering wheel or dashboard. Plug the provided OBD cable into this socket.
  2. Route the Cable: Carefully route the OBD cable along the A-pillar or dashboard edges, tucking it into the sealing strip to keep it neat and secure.
  3. Position the HUD Unit: Place the M8 HUD unit on your dashboard in a position that provides a clear view of the projected display on your windshield without obstructing your driving view.
  4. Apply Reflective Film (Optional): If the projection on your windshield is not clear or has a double image, apply the reflective film to the windshield where the HUD projects. Clean the area thoroughly before application.
  5. Secure with Anti-Slip Mat: Use the provided anti-slip mat to prevent the HUD unit from sliding on the dashboard.
Three-step installation guide showing plugging in the OBD connector, routing the wire, and placing the HUD unit on the dashboard.
Figure 2: Installation Steps

Compatibility Note: This HUD is suitable for cars with OBD2 and EUOBD ports (Auto Vehicle Diagnostic System). Specifically, it is compatible with US OBD2 protocol petrol cars produced after 2004, and OBD2 protocol petrol cars produced after 2008 in other regions. Please ensure your vehicle meets these requirements. For GPS functionality, the unit will automatically acquire satellite positioning once powered on and placed in a suitable location.

Operation

The M8 HUD automatically powers on and off with your vehicle's ignition. It features an intuitive interface and multiple display modes.

Display Functions

The HUD can display a variety of driving data. Key indicators include:

  • Speed: Current vehicle speed (KM/H or MPH).
  • Engine RPM: Engine revolutions per minute.
  • Water Temperature: Engine coolant temperature.
  • Voltage: Vehicle battery voltage.
  • Driving Distance: Trip distance.
  • Instantaneous Fuel Consumption: Real-time fuel usage.
  • Average Fuel Consumption: Average fuel usage over a trip.
  • Fault Code Alarm: Alerts for detected engine fault codes.
  • Fatigue Driving Alarm: Reminds drivers to take breaks.
  • Low Voltage Alarm: Warns of low battery voltage.
  • High Water Temperature Alarm: Alerts for engine overheating.
  • Over Speed Alarm: Notifies when a preset speed limit is exceeded.
  • Gear Change Reminder: Suggests optimal gear shifts.
  • Ambient Decorative Lighting: Visual enhancements.
  • Light Sensor: Automatically adjusts display brightness.
Diagram labeling various display functions of the M8 HUD including speed, RPM, water temperature, voltage, and various alarms.
Figure 3: HUD Display Functions Overview

Display Modes

The M8 HUD offers 16 different screen display modes, allowing you to customize the information shown. You can switch between modes with a single click using the dial key on the unit.

Image showing 16 different screen display modes for the M8 HUD, combining speed, RPM, water temperature, voltage, and decorative lighting.
Figure 4: 16 Screen Display Modes

Examples of practical driving data modes include:

  • Normal Mode: Displays Speed, Engine RPM, and Decorative lighting.
  • High Speed Mode: Focuses on Speed and Engine RPM.
  • Mileage Measurement: Shows trip distance.
  • Simple Mode: Displays only Speed.
Four examples of driving data displays: Normal mode, High speed mode, Mileage measurement, and Simple mode.
Figure 5: Practical Driving Data Modes

Care and Maintenance

  • Cleaning: Wipe off surface dust or stains promptly after use with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use for extended periods, store the product in a dry, well-ventilated location away from direct sunlight and extreme temperatures.
  • Avoid Moisture: Do not use the product outdoors during rain or in high-humidity environments.
  • Temperature Resistance: The unit is made of PC materials resistant to high and low temperatures, allowing it to function normally in various temperature environments (-40°C to +120°C).
Image illustrating the PC materials of the HUD unit are resistant to high temperature and cold.
Figure 6: Temperature Resistance Feature

Troubleshooting

The M8 HUD is designed to be reliable, but if you encounter issues, consider the following:

  • No Display/Power: Ensure the OBD cable is securely connected to both the HUD unit and the vehicle's OBD2 port. Check if your vehicle's ignition is on.
  • Inaccurate Readings: Verify that your vehicle is compatible with the OBD2 protocol (US petrol cars after 2004, other regions after 2008). If readings are still off, consult your vehicle's manual or a professional mechanic.
  • Engine Fault Alarm: The HUD can display engine fault codes. If an alarm appears, it indicates a potential issue with your vehicle. It is recommended to have your vehicle inspected by a qualified mechanic.
  • Display Glare/Double Image: Adjust the position of the HUD unit. If the issue persists, ensure the reflective film is properly applied to the windshield. The self-shaded display design helps minimize glare.
  • Unit Not Turning Off: The HUD should automatically shut off with the vehicle. If it remains on, ensure the OBD connection is correct. You can also use the manual switch mode if available.

For complex issues or repairs, do not attempt to disassemble the unit. Contact professional maintenance personnel or the seller for assistance.

Specifications

Feature Detail
Model M8
Output Interface OBD2 interface
Connectivity Wired
Dimensions (L x W x H) 90 x 53 x 26mm (3.5 x 2.1 x 1.0 inches)
Material ABS+PC
Imaging Screen LED display
Display Mode Virtual image reflection type
Operating Voltage 11V~18Vdc (12V DC/200mA)
Standby Current <=30mA
Operating Conditions Ambient temperature -40°C to +120°C, Atmospheric pressure 86-106KPa, Relative humidity 10%-95%, Ambient noise <=60dB(A)
Origin Mainland China
Diagram showing the dimensions of the M8 HUD unit: 3.5 inches length, 2.1 inches width, 1 inch height at back, 0.6 inches height at front.
Figure 7: Product Dimensions

User Tips

  • Clarity in Bright Conditions: The self-shaded display design helps maintain clear visibility even in bright sunlight. For optimal clarity, ensure the unit is positioned correctly and consider using the reflective film.
  • Automatic Operation: The HUD is designed for convenience, automatically turning on and off with your car's ignition. This helps conserve battery life and ensures the device is ready when you are.
  • Customizable Display: Experiment with the 16 different display modes to find the layout that best suits your driving preferences and provides the most relevant information at a glance.
  • Unit Switching: Easily switch between Kilometers per Hour (KM/H) and Miles per Hour (MPH) to match your regional standard or personal preference.
  • Brightness Adjustment: Utilize both the automatic and manual brightness adjustment modes to ensure comfortable viewing in all lighting conditions, day or night.

Frequently Asked Questions (FAQ)

Q: What cars are compatible with this HUD?
A: The M8 HUD is compatible with US OBD2 protocol petrol cars produced after 2004, and OBD2 protocol petrol cars produced after 2008 in other regions.
Q: Does it display MPH or KMH?
A: Yes, the unit supports free switching between Kilometers per Hour (KM/H) and Miles per Hour (MPH).
Q: What data can the HUD display?
A: It can display speed, engine RPM, water temperature, voltage, instantaneous and average fuel consumption, driving distance, and various alarms (fault code, fatigue driving, low voltage, high water temperature, over speed, gear change reminder).
Q: Is installation difficult?
A: No, the installation is non-destructive and involves simply plugging the OBD cable into your car's OBD2 port, routing the cable, and placing the HUD unit on the dashboard. No special tools are required.

Support

For any questions, technical support, or issues not covered in this manual, please contact the seller or manufacturer directly. Do not attempt to repair the device yourself, as this may void any potential warranty and could cause further damage.

An additional user manual in PDF format may be available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.