Aigo B760L

Contents

Aigo B760L Motherboard User Manual

Intel Socket LGA 1700 for 12th/13th Gen Processors, Dual-channel DDR4

1. Product Overview

The Aigo B760L Motherboard is designed to support Intel 12th and 13th Generation Core i3, i5, i7, and i9 processors, utilizing the LGA 1700 socket. Featuring the Intel B760 chipset, this motherboard offers a robust platform for desktop computers, gaming, audio/video editing, and office applications. It supports dual-channel DDR4 memory up to 64GB and includes multiple expansion options such as M.2 NVMe slots and PCI-E 4.0.

Aigo B760L D4 Motherboard with retail box, highlighting key features
Figure 1: Aigo B760L D4 Motherboard and packaging, showcasing features like LGA1700, DDR4, M.2, and SATA.

2. Specifications

Below are the detailed specifications for the Aigo B760L-D4 Motherboard:

Feature Detail
Model B760L-D4
Chipset Intel B760
CPU Socket LGA 1700
CPU Compatibility Intel 12th/13th Generation Core i3/i5/i7/i9 Processors
Memory Slots 2 x DDR4 DIMM
Memory Capacity Max 64GB
RAM Memory Technology Supports DDR4 Dual Channel 2133-3200 MHz (XMP Overclocking)
Storage Interface Type M.2 (NVMe), SATA
M.2 Slots 2 x M.2 NVMe Dual-Protocol Interface
SATA Ports 4 x SATA 3.0
PCI-E Standards PCI-E 4.0
PCIe x16 Slots 1 x PCI-E 4.0 x16
PCIe x1 Slots 2 x PCI-E x1
USB Ports (Back I/O) 4 x USB 3.2/3.1 Gen 1, 2 x USB 2.0
Video Output 1 x HDMI, 2 x DVI-D, 1 x VGA (D-Sub)
Onboard LAN 1 x RJ45 Gigabit Ethernet
Wireless Connectivity Onboard WiFi Interface (Compatible with CNVI protocol only)
Audio Onboard 6-Channel HD Audio Codec, Audio Interface (Rear I/O)
PS/2 Ports 1 x PS/2 Keyboard and Mouse Port
Power Supply Interface 1 x 24-pin Power Connector, 1 x 8-pin ATX 12V Power Connector
Power Design 8-phase power supply
Form Factor ATX
Dimensions 24.4 x 21 cm
Compatible OS Windows 10/11
Table of specifications for the B760L-D4 Motherboard
Figure 2: Detailed specifications table for the Aigo B760L-D4 Motherboard.

3. Setup Guide

Follow these steps to properly install your Aigo B760L Motherboard and its components.

3.1 CPU Installation

  1. Carefully open the LGA 1700 CPU socket lever.
  2. Align the CPU with the socket, ensuring the triangular mark on the CPU matches the mark on the socket.
  3. Gently place the CPU into the socket without forcing it.
  4. Close the socket lever to secure the CPU.

Important: Install the processor before removing the protective cover. Do not touch the socket contacts. Save and replace the cover if the processor is removed.

Close-up of the LGA 1700 CPU socket with installation warnings
Figure 3: LGA 1700 CPU Socket with installation instructions.

3.2 Memory (RAM) Installation

  1. Open the clips on both ends of the DDR4 memory slots.
  2. Align the RAM module with the slot, ensuring the notch on the module matches the key in the slot.
  3. Press down firmly on both ends of the RAM module until the clips snap into place.
  4. For dual-channel performance, install memory modules in matching slots (refer to your case manual for specific slot pairing).
Close-up of the DDR4 memory slots, highlighting XMP overclocking
Figure 4: DDR4 Memory Slots supporting XMP Overclocking up to 3200MHz.

3.3 Storage Device Installation

M.2 NVMe SSD

  1. Locate the M.2 slots on the motherboard.
  2. Remove the M.2 standoff screw.
  3. Insert the M.2 SSD into the slot at an angle.
  4. Gently push down the SSD and secure it with the standoff screw.
Close-up of the M.2 NVMe slots on the motherboard
Figure 5: M.2 NVMe Dual-Protocol Interface slots.

SATA Drives

  1. Connect one end of the SATA data cable to a SATA 3.0 port on the motherboard.
  2. Connect the other end of the SATA data cable to your HDD/SSD.
  3. Connect a SATA power cable from your power supply to the HDD/SSD.

3.4 Graphics Card Installation

  1. Locate the PCI-E 4.0 x16 slot (reinforced with steel armor).
  2. Remove the corresponding expansion slot cover from your PC case.
  3. Align your graphics card with the slot and press down firmly until it is fully seated.
  4. Secure the graphics card to the case with a screw.
  5. Connect any necessary PCIe power cables from your power supply to the graphics card.
Close-up of the PCIe x16 slot with steel armor protection
Figure 6: PCIe x16 slot with steel armor for enhanced stability.

3.5 Power Connections

  1. Connect the 24-pin ATX power connector from your power supply to the main power socket on the motherboard.
  2. Connect the 8-pin ATX 12V power connector (CPU power) from your power supply to the corresponding socket near the CPU.

3.6 Front Panel and Rear I/O Connections

Connect your case's front panel cables (power switch, reset switch, USB, audio) to the appropriate headers on the motherboard. Refer to the diagram below for common connection points.

Diagram showing various connectors and ports on the motherboard
Figure 7: Motherboard layout with labeled connectors including M.2, SATA, USB, Audio, and PCIe slots.

Connect peripherals (monitor, keyboard, mouse, Ethernet) to the rear I/O ports:

Detailed view of the motherboard's rear I/O ports
Figure 8: Rear I/O Panel showing PS/2, USB, Video (HDMI, DVI, VGA), Ethernet, and Audio ports.

3.7 WiFi Module Installation (if applicable)

The motherboard is equipped with an onboard WiFi interface. If you are installing a compatible CNVI protocol WiFi module, insert it into the designated slot and secure it.

Close-up of the onboard WiFi interface
Figure 9: Onboard WiFi Interface, supporting CNVI protocol.

4. Operating Instructions

  1. After all components are installed and connected, ensure your power supply is switched on.
  2. Press the power button on your PC case.
  3. The system should boot up. You may need to enter the BIOS/UEFI setup to configure boot order or other settings.
  4. Install your preferred operating system (Windows 10 or Windows 11 are compatible).
  5. Install all necessary drivers for the motherboard components (chipset, audio, LAN, etc.) from the manufacturer's website or included media.

Note on Integrated Graphics: If you plan to use the integrated video outputs (HDMI, DVI, VGA) without a dedicated graphics card, ensure your installed CPU supports integrated graphics.

5. Maintenance

  • Cleaning: Regularly clean your PC case and motherboard components to prevent dust buildup, which can lead to overheating. Use compressed air to remove dust from fans, heatsinks, and slots.
  • BIOS/UEFI Updates: Periodically check the manufacturer's website for BIOS/UEFI updates. Updates can improve stability, compatibility, and performance. Follow the update instructions carefully.
  • CMOS Battery: The motherboard uses a CR2032 coin cell battery for the CMOS (Complementary Metal-Oxide-Semiconductor) to store BIOS settings and system time. If your system consistently loses time or BIOS settings, the battery may need replacement.

6. Troubleshooting

  • No Power/No Boot:
    • Ensure all power cables (24-pin ATX, 8-pin CPU) are securely connected.
    • Verify the power supply is switched on and functioning.
    • Check front panel power switch connections.
  • No Display:
    • Confirm your monitor is connected to the correct video output (either dedicated GPU or motherboard's integrated graphics port).
    • If using integrated graphics, ensure your CPU supports it.
    • Reseat the graphics card and RAM modules.
  • System Instability/Crashes:
    • Check RAM modules for proper installation and test them individually if possible.
    • Ensure CPU cooler is properly installed and making good contact.
    • Verify all drivers are up to date.
  • M.2 SSD Not Detected:
    • Ensure the M.2 SSD is fully seated in its slot.
    • Check BIOS/UEFI settings to ensure M.2 slots are enabled and configured correctly (e.g., NVMe mode).

7. User Tips

  • M.2 SSD Compatibility: This motherboard fully supports NVMe M.2 SSDs, offering high-speed storage solutions. Ensure your M.2 drive is NVMe for optimal performance.
  • Memory Overclocking: Take advantage of the XMP (Extreme Memory Profile) feature in the BIOS/UEFI to achieve the advertised speeds of your DDR4 memory modules, up to 3200MHz.
  • Driver Installation: Always install the latest drivers for your chipset, graphics, audio, and LAN from the official Aigo or component manufacturer websites to ensure system stability and performance.

8. Warranty and Support

The Aigo B760L Motherboard comes with a one-year warranty from the date of purchase. For technical support, driver downloads, or warranty claims, please contact your retailer or visit the official Aigo support website.

Please note that physical damage, improper installation, or unauthorized modifications may void your warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.