1. Safety Information
READ AND SAVE THESE INSTRUCTIONS.
- WARNING: To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before you begin.
- All wiring must be in accordance with the National Electrical Code "ANSI/NFPA 70" and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked "acceptable for fan support of 35 lbs. (15.9 Kg) or less" and use screws provided with the outlet box.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 35 lbs (15.9 kg). Use only UL Listed outlet boxes marked "Acceptable for Fan Support of 35 lbs. (15.9 kg) or less."
- Do not place objects in the path of the blades.
- To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.
- All setscrews must be checked and retightened where necessary before installation.
- CAUTION: The fan must be mounted with a minimum of 7 ft (2.1 m) clearance from the trailing edge of the blades to the floor.
- CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
2. Product Overview
Exploded View
This diagram illustrates the main components of the ceiling fan: Hanger Bracket, Motor Assembly, Outer Cover, Blade, Light Kit, and Lampshade.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | CY-Fan |
| Item Type | Ceiling Fans |
| Features | Ceiling Fan with Light |
| Blade Size | 42 inch (105CM), 52 inch (132CM) |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Number of Lights | 1 pcs |
| Light Source | LED |
| Luminous Flux | 2400 Lumens (approx.) |
| Is Dimmable | Yes |
| Is Bulbs Included | Yes |
| Power | 48W |
| Power Source | AC |
| Body Material | ABS, aluminum |
| Style | Modern Style |
| Installation Method | Assembly |
| Weight | 4.41 KG |
| Certification | CE, CCC |
| Origin | Mainland China |
| Warranty | 2 years |
Recommended Room Size: 12ft x 12ft to 18ft x 18ft.
Detailed dimensions for 42-inch (105cm) and 52-inch (132cm) models, showing a flush mount design.
4. Installation Instructions
For detailed visual guidance, please refer to the diagrams provided.
Step 1: Prepare Mounting Location
-
If installed on a wooden roof, use four wooden teeth screws.
Figure 1a: Hanger bracket installation on a wooden joist.
-
If installed on a concrete roof, use four expansion screws.
Figure 2a: Hanger bracket installation on a concrete ceiling.
Step 2: Install Motor Assembly
- Remove the four screws from the hanger bracket.
-
Lock the motor assembly onto the hanger bracket using four screws.
Figure 2b: Attaching the motor assembly to the hanger bracket.
Step 3: Connection Remote Control (Wiring)
-
Make the following wire connections to the receiver unit (see Fig. 3a) using the wire nuts supplied:
- The red, black and white wires on the controller are connected to the corresponding red, black and white wires on the motor.
- The white and blue lines on the controller are connected to the white and blue lines on the motor.
Figure 3a: Wiring connections for the remote control receiver.
- After making the wire connections, ensure the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the other side of the outlet box.
- Ensure the splices after being made should be turned upward and pushed carefully up into the outlet box.
-
Push all connected wires up into ceiling box. Put the receiver into the mounting bracket as shown in Figure 3b. Ensure to connect all ground wires accordingly.
Figure 3b: Remote control receiver placed within the mounting bracket.
NOTE: Once ground wires are connected, carefully tuck all wires and marrettes into the metal box making sure that the wires are clear of the hemisphere and downrod when positioned in hemisphere and downrod when positioned in mounting bracket.
Step 4: Install Outer Cover
-
Reserve installation positions on the three sides of the external component (Figure 4a).
Figure 4a: Attaching the outer cover to the fan assembly.
Step 5: Install Blades
-
Lock the fan blades up and down with screws.
Figure 6a: Securing the fan blades to the motor assembly.
Step 6: Install Light Kit
- Remove light kit screws.
-
Align the light kit hole with the connecting piece and lock the screw.
Figure 6b: Attaching the light kit to the fan.
-
Insert the terminal of the light wire into the light source port.
Figure 6c: Connecting the light wires.
-
Place Lampshade onto the fan and turn to secure.
Figure 6d: Securing the lampshade.
5. Operating Instructions
Remote Control Functions
The ceiling fan is operated via a remote control. Learning code and matching mode is used between the emitter (remote) and receiver.
- Open the battery cover on the hand-held remote and install a pair of AAA (1.5V) batteries (not included).
- If the remote cannot control the fan, learning code matching mode is used. Turn "ON" the supply power within 10 seconds and press the remote's "ALL OFF" button for 5 seconds. The fan will load normally after hearing a long sound “bee”, indicating successful learning.
- If the remote still cannot control the receiver, check the battery switch contact, positive/negative correction, and battery charge level.
- Check for similar remote-controlled products nearby, as they might interfere if operating on the same frequency.
- Remove batteries from the remote when leaving unused for a long time.
- When installing the fan, ensure the fan ceiling cover does not press the antenna or other wires, to prevent damage or short-circuit.
Remote control layout showing buttons for fan speed, light control, and timing.
Fan Speed Control
The fan offers 6 wind speeds, adjustable via the remote control:
- Sleep Wind (1-2): Gentle airflow for quiet environments.
- Natural Wind (3-4): Moderate airflow for general comfort.
- Strong Wind (5-6): Powerful airflow for rapid cooling.
The fan features 6 wind speeds and 3 light temperatures, all controllable by remote.
Light Control
The integrated LED light offers 6 levels of brightness and 3 color temperatures:
- Cold Light (6000K): Bright, cool white light.
- Neutral Light (4500K): Balanced white light.
- Warm Light (3000K): Soft, warm yellow light.
Adjustable light temperatures to suit different moods and needs.
Reversible Motor (Dual Modes)
The fan features a reversible DC motor, allowing for year-round use:
- Summer Forward Mode: Downward airflow creates a cooling breeze.
- Winter Reverse Mode: Upward airflow helps to circulate warm air, distributing heating more effectively.
Easily switch between summer and winter modes with one click on the remote.
Product Demonstration Video
Watch this video for a demonstration of the fan's features, including light and speed adjustments.
6. Maintenance
- Cleaning: To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth. Do not use abrasive cleaners or materials that could scratch the finish.
- Blade Care: Periodically check that all blades are screwed firmly into their holders and that the blade holders are tightened securely to the motor. This helps prevent wobbling and ensures smooth operation.
- Electrical Connections: Ensure all electrical connections remain secure. If any issues arise, consult a qualified electrician.
7. Troubleshooting Guide
If you experience any issues with your ceiling fan, please refer to the following guide before seeking professional assistance.
| Problem | Suggested Remedy |
|---|---|
| Fan does not work. |
|
| Fan sounds noisy. |
|
| Fan wobbles. |
|
| Light does not work. |
|
8. User Tips
- Quiet Operation: The fan is generally very quiet, especially at lower speeds (1-4). Some wind noise may be noticeable at the highest speed (6), but it is typically not bothersome.
- Lighting Brightness: While the LED light offers 3 color temperatures and 6 brightness levels, some users find it slightly dim for tasks like reading, especially in rooms without additional lighting. Consider auxiliary lighting if bright illumination is a priority.
- Installation Ease: Many users found the installation process manageable, especially with the help of visual guides. Proper placement and securing of all components are key for stable and quiet operation.
- Last State Memory: The fan's light and speed settings typically retain their last state when turned off and on via the wall switch, offering convenience.
- Reversible Functionality: The summer (downward airflow) and winter (upward airflow) modes are highly appreciated for year-round comfort and energy efficiency.
- Electrical Compatibility: This fan is designed for AC power. Users in regions with different electrical standards (e.g., US 110-120V vs. other regions 220-240V) should verify compatibility with their local electrical system before installation.
9. Warranty & Support
This IRALAN Ceiling Fan comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For customer service, technical support, or warranty claims, please contact:
Customer Service Email: sxdsltd@.com
A comprehensive user manual (PDF) is available for download for more detailed instructions and diagrams. Please refer to the product page or contact customer service for the direct link.