Introduction
Thank you for choosing the BEBONCOOL PRO Q214 Wireless Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller to ensure an optimal gaming experience across multiple platforms including Nintendo Switch, PC, Android, and iOS devices.
BEBONCOOL PRO Q214 Wireless Controller with vibrant RGB lighting.
Safety Information
- Keep the controller away from water and other liquids.
- Do not expose the controller to extreme temperatures.
- Avoid dropping or subjecting the controller to strong impacts.
- Do not attempt to disassemble or modify the controller.
- Use only the provided USB-C cable for charging.
Package Contents
- BEBONCOOL PRO Q214 Wireless Controller
- USB-C Charging Cable
- User Manual (this document)
Product Overview
The BEBONCOOL PRO Q214 features a robust design with intuitive controls and advanced functionalities for an immersive gaming experience.
Front view of the controller highlighting main buttons and joysticks.
Rear view of the controller with M1 and M2 programmable buttons.
Setup
1. Charging the Controller
Before first use, fully charge the controller. Connect the provided USB-C cable to the controller's charging port and the other end to a power source (e.g., console, PC, USB wall adapter). The charging time is approximately 3 hours for a full charge.
The controller features a 1000mAh battery, providing up to 18 hours of playing time after a 3-hour charge.
2. Connecting to Nintendo Switch/Switch OLED/Switch Lite
- On your Nintendo Switch, go to the HOME Menu.
- Select 'Controllers' > 'Change Grip/Order'.
- Press and hold the 'Home' button and 'Y' button on the BEBONCOOL controller simultaneously for 3-5 seconds until the LED indicators start flashing rapidly.
- Once connected, the LED indicator(s) on the controller will light up solid.
3. Connecting to PC (Wired/Bluetooth)
Wired Connection:
- Connect the controller to your PC using the USB-C cable.
- The PC should automatically detect and install the necessary drivers.
- The controller will be ready for use.
Bluetooth Connection:
- Ensure your PC has Bluetooth enabled.
- On your PC, go to 'Settings' > 'Devices' > 'Bluetooth & other devices'.
- Select 'Add Bluetooth or other device' > 'Bluetooth'.
- Press and hold the 'Home' button and 'X' button on the BEBONCOOL controller simultaneously for 3-5 seconds until the LED indicators start flashing rapidly.
- Select the controller from the list of available Bluetooth devices on your PC.
- Once paired, the LED indicator(s) on the controller will light up solid.
4. Connecting to Android/iOS Devices
- Ensure Bluetooth is enabled on your Android or iOS device.
- Press and hold the 'Home' button and 'A' button (for Android) or 'Home' button and 'B' button (for iOS) on the BEBONCOOL controller simultaneously for 3-5 seconds until the LED indicators start flashing rapidly.
- On your device, go to Bluetooth settings and search for new devices.
- Select the controller from the list of available Bluetooth devices.
- Once paired, the LED indicator(s) on the controller will light up solid.
Operating Instructions
1. RGB Lighting Modes
The controller features 9 adjustable LED colors and 4 lighting modes to customize your gaming ambiance.
Illustrates the various RGB lighting modes available on the controller.
- Solid Light Mode: Displays a single, constant color.
- Breathing Light Mode: Colors fade in and out.
- Flash Mode: Colors flash rapidly.
- Off Mode: Turns off all LED lighting.
Refer to the controller's specific button combinations (usually involving the RGB button) to cycle through colors and modes.
2. Turbo Function (Auto & Manual)
The Turbo function allows for rapid, repeated button presses, enhancing performance in fast-paced games. It supports 5, 12, and 20 shots per second.
Turbo setting options for rapid firing.
- To activate Manual Turbo: Press the 'T' (Turbo) button and the desired action button simultaneously.
- To activate Auto Turbo: Press the 'T' button and the desired action button twice.
- To adjust Turbo speed: While Turbo is active, press the 'T' button and move the Right Analog Stick Up or Down.
- To deactivate Turbo: Repeat the activation steps for the specific button, or press the 'T' button and the action button three times to clear Auto Turbo.
3. Programmable Buttons (M1/M2)
The M1 and M2 buttons on the back of the controller can be programmed to replicate single or multiple button inputs, allowing for custom macros.
M1/M2 buttons can be mapped to A+B+X+Y+L+ZL+R+ZR+L3+R3+D-pad combinations.
- To program M1/M2: Press and hold the 'M' button (located between M1 and M2) until the indicator light flashes. Then press the M1 or M2 button you wish to program, followed by the sequence of buttons you want to assign. Press the 'M' button again to save.
- To clear M1/M2 programming: Press and hold the 'M' button until the indicator light flashes. Then press the M1 or M2 button you wish to clear twice. Press the 'M' button again to save.
4. Vibration Adjustment
The controller features 4 adjustable vibration levels: None, Weak, Moderate, and Strong, to enhance game immersion.
The controller offers precise motion control and customizable vibration feedback.
Refer to the controller's specific button combinations (usually involving the vibration button or a combination with the 'T' button) to cycle through vibration intensities.
5. 6-Axis Gyro Sensor
The super sensitive 6-axis gyro sensor provides precise motion control, allowing for intuitive aiming and movement in compatible games.
6. Hall Linear Trigger
The Hall Linear Triggers offer precise and responsive input, providing a smooth and accurate gaming experience, especially in racing and shooting games.
Demonstration of the BEBONCOOL PRO Q214 Wireless Controller's features, including RGB lights, programmable buttons, turbo, vibration, gyro, and multi-device compatibility.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.
- Storage: Store the controller in a cool, dry place away from direct sunlight when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in active use.
Troubleshooting
Controller not connecting:
- Ensure the controller is fully charged.
- Verify that Bluetooth is enabled on your device.
- Make sure you are using the correct pairing mode for your device (e.g., Home+Y for Switch, Home+X for PC, Home+A for Android, Home+B for iOS).
- Try restarting your device and the controller.
- If connecting to PC via Bluetooth, ensure your PC's Bluetooth drivers are up to date.
Input lag or disconnection:
- Ensure there are no obstructions between the controller and your device.
- Move closer to your device to reduce interference.
- Check for other wireless devices that might be causing interference.
- Ensure the controller's battery is not low.
Buttons not responding:
- Check if any buttons are stuck.
- Reset the controller (refer to the manual for specific reset instructions, usually a small pinhole button).
Specifications
| Feature | Detail |
|---|---|
| Brand Name | BEBONCOOL |
| Model Number | BEBONCOOL Q214 |
| Type | Gamepads |
| Interface Type | USB, Bluetooth |
| Compatible Platform | Nintendo Switch, PC, Android, iOS, Steam |
| Compatible Nintendo Model | Nintendo Switch, Nintendo Switch OLED, Nintendo Switch Lite |
| Compatible Brand/Model | Nintendo |
| Trigger Button Type | Non-Linear (Hall Linear Trigger) |
| Package | Yes |
| Certification | CE, FCC, RoHS |
| Battery Capacity | 1000mAh |
| Playing Time | Up to 18 hours |
| Charging Time | Approximately 3 hours |
User Tips
- Battery Life: To maximize your gaming sessions, ensure the controller is fully charged before extended play. A full charge provides approximately 18 hours of gameplay.
Warranty & Support
For warranty information or technical support, please refer to the seller's policies or contact BEBONCOOL customer service directly. Keep your purchase receipt for any warranty claims.
