1. Introduction
This manual provides essential information for the safe and efficient use of your Canon G3910 Inkjet Printer. Please read this manual thoroughly before using the printer and keep it for future reference.
Figure 1: Canon G3910 Printer (Black)
Figure 2: Canon G3910 Printer (Red)
Figure 3: Canon G3910 Printer (Blue)
2. Setup
2.1 Unpacking and Initial Placement
Carefully remove the printer from its packaging. Place the printer on a stable, flat surface with adequate space around it for ventilation and operation. Remove all protective tapes and packing materials from the printer.
2.2 Ink Filling
The Canon G3910 features an integrated ink tank system. Follow these steps to fill the ink tanks:
- Open the ink tank cover located on the side of the printer.
- Identify the corresponding color tanks (Black, Cyan, Magenta, Yellow).
- Open the cap of the ink tank you wish to fill.
- Take the ink bottle of the matching color, remove its cap, and gently invert it over the ink tank's nozzle. The ink is designed to flow automatically without squeezing.
- Once the tank is full, remove the ink bottle and securely close the ink tank cap.
- Repeat for all other colors.
Figure 4: Ink Filling Procedure (Refer to specific sections in the image for detailed steps)
2.3 Paper Loading
The printer supports various paper types and sizes. To load paper:
- Open the rear paper tray cover.
- Adjust the paper guides to match the width of your paper.
- Load the paper stack into the rear tray, ensuring the print side is facing up.
- For output, extend the front output tray.
Figure 5: Paper Loading Instructions (Refer to specific sections in the image for detailed steps)
2.4 Power On and Initial Setup
Connect the power cord to the printer and a wall outlet. Press the power button. Follow the on-screen instructions on your computer or the printer's small display (if available) to complete the initial setup, including language selection and print head alignment.
2.5 Connectivity
The Canon G3910 supports Wi-Fi connectivity. To connect to a wireless network:
- Access the network settings from the printer's control panel.
- Select your Wi-Fi network and enter the password.
- Alternatively, use the Canon PRINT Inkjet/SELPHY app for guided setup.
Figure 6: Printer Control Panel and Ink Tanks
3. Operating the Printer
3.1 Printing Documents and Photos
To print from your computer or mobile device:
- Ensure the printer is powered on and connected to your network or computer.
- Open the document or photo you wish to print.
- Select 'Print' from the application's menu.
- Choose the Canon G3910 from the list of available printers.
- Adjust print settings (paper size, type, quality, color/grayscale) as needed.
- Click 'Print'.
The printer supports various mobile printing solutions including Canon PRINT Inkjet/SELPHY app, PIXMA Cloud Link, Google Cloud Print, Apple AirPrint, and Mopria.
3.2 Copying Documents
To make a copy:
- Lift the scanner lid and place the document face-down on the scanner glass, aligning it with the guide mark.
- Close the scanner lid gently.
- On the printer's control panel, press the 'Copy' button.
- Use the '+' or '-' buttons (if available) to select the number of copies (1-20 pages).
- Press the 'Black' or 'Color' button to start copying.
3.3 Scanning Documents
To scan a document:
- Place the document face-down on the scanner glass.
- Ensure the printer is connected to your computer.
- Open the scanning software on your computer (e.g., Canon IJ Scan Utility).
- Select the scan settings (document type, resolution, destination).
- Click 'Scan'.
4. Maintenance
4.1 Ink Refilling
Monitor ink levels regularly. When an ink tank is low, refill it using genuine Canon ink bottles as described in the 'Setup' section (2.2 Ink Filling). Do not overfill the tanks.
4.2 Cleaning the Printer
Regular cleaning helps maintain print quality and prolong printer life:
- Exterior: Wipe the exterior of the printer with a soft, damp, lint-free cloth.
- Scanner Glass: Clean the scanner glass with a soft, dry, lint-free cloth. Avoid using abrasive cleaners.
- Print Head Cleaning: If print quality degrades (e.g., streaks, missing colors), perform a print head cleaning from the printer's maintenance menu or through the printer driver on your computer.
- Print Head Deep Cleaning: If standard cleaning does not resolve the issue, perform a deep cleaning. Note that deep cleaning consumes more ink.
5. Troubleshooting
This section addresses common issues you might encounter with your Canon G3910 printer.
5.1 Printer Not Responding
- Check if the printer is powered on and the power cord is securely connected.
- Verify the USB cable (if used) is properly connected to both the printer and computer.
- For Wi-Fi connections, ensure the printer is connected to the correct network and the Wi-Fi signal is strong.
- Restart both the printer and your computer/device.
5.2 Poor Print Quality
- Check ink levels and refill any low tanks.
- Perform a print head cleaning or deep cleaning (see Maintenance section).
- Ensure you are using the correct paper type and quality settings for your print job.
- Use genuine Canon ink for optimal results.
5.3 Paper Jams
- Turn off the printer and unplug it.
- Carefully remove any jammed paper from the paper trays or inside the printer. Avoid tearing the paper.
- Ensure paper is loaded correctly and not creased or curled.
- Do not overload the paper tray.
6. Specifications
Below are the detailed specifications for the Canon G3910 printer:
| Category | Specification |
|---|---|
| Copy Information | |
| Copy Speed | Approx. 24 seconds |
| Continuous Copy | 1-20 pages |
| Print Information | |
| Print Speed (Black & White) | 8.8 ipm |
| Print Speed (Color) | 5.0 ipm |
| Photo Print Speed (4"x6") | Approx. 60 seconds (based on PP-201 borderless printing) |
| Resolution | 4,800 x 1,200 dpi |
| Supported OS | Windows 10, Windows 8.1, Windows 7 SP1 |
| Number of Head Nozzles | 1,472 nozzles (PG8K 320 nozzles, C/M/Y 384 nozzles each) |
| Supported Paper Types & Sizes |
Plain Paper: A4, A5, B5 Photo Paper Plus Glossy II (PP-201): A4, 4"x6", Square(5"x5"), 5"x7", 10"x8", 8"x10" Photo Paper Pro Luster (LU-101): A4 Photo Paper Plus Semi-Gloss (SG-201): A4, 4"x6", 5"x7", 10"x8" Matte Photo Paper (MP-101): A4 Photo Paper Glossy (GP-508): A4, 4"x6" GRC (GP-208): A4, 4"x6" |
| Scan Information | |
| Scanner Type | Flatbed |
| Scan Method | CIS |
| Scan Speed | Approx. 19 seconds |
| Optical Resolution | 600 x 1200 dpi |
| Other Specifications | |
| KCC Certification | MSIP-RMM-CIN-K10471 |
| Energy Efficiency Grade | Not applicable |
| Manufacturer | CANON Vietnam Co.,LTD |
| Country of Manufacture | Vietnam |
| Safety Certification Number | ZU10041-17003 |
| Safety Certified Product Name | Inkjet |
| Release Date | February 2018 |
| Signal Connection Type | None |
7. User Tips
To maximize your experience with the Canon G3910 printer, consider the following tips:
- Regular Printing: Print at least once a week to prevent print head clogs, especially if you don't use the printer frequently.
- Genuine Ink: Always use genuine Canon ink bottles. This ensures optimal print quality, prevents damage to the print heads, and maintains warranty validity.
- Paper Storage: Store paper in a cool, dry place to prevent curling or moisture absorption, which can lead to paper jams and poor print quality.
- Software Updates: Periodically check for and install the latest printer drivers and software from the Canon website to ensure compatibility and access to new features.
8. Warranty and Support
Your Canon G3910 printer comes with a standard 1-year quality assurance warranty from the date of purchase.
For technical support, warranty claims, or service inquiries, please contact Canon customer service.
Customer Service Phone Number: 1588-2500
Please have your printer's model number and serial number ready when contacting support.