saimili LED COB Light Strip USB Touch Sensor

Contents

LED Light Strip USB Touch Sensor User Manual

Model: LED COB Light Strip USB Touch Sensor

Brand: saimili

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your saimili LED COB Light Strip with USB Touch Sensor. Please read this manual carefully before use to ensure safe and optimal performance of the product.

2. Product Features

  • Lightweight and Easy to Use: Low voltage power supply, easy to carry, suitable for a variety of scenes.
  • Energy Saving: Compared with traditional light bulbs, it offers low power consumption and low heat generation.
  • Long Life: The service life is up to 25,000 hours, reducing the frequency of light strip replacement.
  • Flexible and Mouldable: Adopting flexible material, it can be easily installed on irregular surfaces.
  • Touch Sensor Switch: Integrated switch for convenient On/Off and brightness adjustment.
  • High Density COB LEDs: Provides uniform, soft, and comfortable lighting without visible light points or dark spots.
  • Cuttable Design: Can be cut along designated lines to fit specific lengths.
  • Easy Installation: Features strong double-sided tape for quick and secure mounting.

3. Specifications

Attribute Value
Product Name USB COB Light Strip
Model Number LED COB Light Strip USB Touch Sensor
Brand Name saimili
Strip Type COB
LEDs Number/M 320
Voltage DC 5V
Power Source DC (USB Powered)
Power Generation Touch
Luminous Flux 249-2000 lumens
Color Temperature (K) 3000K (Warm White), 4000K (Natural White), 6000K (Cold White)
CRI >85
Waterproof No
Is Smart Device No
Certification CE, EMC, LVD, ROHS
Occasion Bedroom, Kitchen, Cabinet, Wardrobe, Closet, Stairs, Home Decoration

Note: Lengths available include 1m, 2m, 3m, 4m, and 5m.

Product specifications and cutting positions
Detailed product specifications and visual guide for cutting positions.

4. Setup and Installation

The LED light strip is designed for easy installation with its flexible material and adhesive backing.

  1. Prepare the Surface: Ensure the surface where you intend to install the light strip is clean, dry, and smooth. Use a dry cloth to wipe away any dust or debris.
  2. Measure and Cut (Optional): If a shorter length is required, carefully cut the strip along the designated cutting lines. The rest of the LED strip will continue to function normally.
  3. Peel and Stick: Remove the protective backing from the double-sided tape on the back of the LED strip.
  4. Apply the Strip: Carefully press the light strip onto the desired surface, ensuring a firm and even application.
  5. Connect Power: Plug the USB connector into a compatible 5V USB power source (e.g., USB wall adapter, power bank, computer USB port).
Easy installation steps: cleaning, peeling, and applying the light strip
Visual guide for easy installation: Clean the surface, tear off the blue protective film, and apply the light strip.
Image showing cuttable light strip, high density, and easy to use features
The light strip is cuttable, features high density LEDs for smooth light, and is easy to use with low 5V voltage.

5. Operation

The LED light strip is controlled via an integrated touch sensor switch on the USB cable.

  • Power On/Off: A short touch on the switch button will turn the light strip On or Off.
  • Adjust Brightness: A long touch on the switch button will adjust the brightness level. Release your finger when the desired brightness is reached.
Touch switch operation for On/Off and brightness adjustment
Instructions for the touch switch: Short touch for On/Off, long touch to adjust brightness (20% to 100%).
Video demonstrating the unboxing, USB connection, and touch switch operation for turning the light on/off and adjusting brightness.

6. Maintenance

  • Cleaning: Use a dry cloth to wipe the surface of the strip. Avoid using cleaning agents containing chemicals or alcohol, as these may damage the strip.
  • Storage: Store the strip in a dry, cool place, away from direct sunlight and high-temperature environments.
  • Duration of Use: It is recommended to use the strip for no more than 10 hours a day to prolong its service life.

7. Troubleshooting

  • Lamp beads do not light: Check if the power supply is connected properly and functioning. Ensure all wiring is secure.
  • Brightness adjustment failure: Check if the touch switch is working correctly. Try to re-adjust it by holding the touch.
  • Broken wire when bending the strip: This may occur if the bending angle is too large. Avoid frequent or sharp bending.
  • Flickering lamp beads: This could indicate poor line contact or power supply issues. Verify that the line connection is firm and the power supply is stable.

8. Safety Precautions

  • Do not use this LED strip in a humid environment to prevent leakage or short-circuit.
  • Avoid using the LED strip for extended periods in high-temperature environments to prevent overheating and damage.
  • Do not immerse this LED strip in water for a long time to prevent short circuits and electric shock.
  • Ensure the power cord is firmly connected before use to prevent electric shock or fire caused by detachment.
  • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

9. User Tips

  • The touch switch allows for both on/off functionality with a short tap and brightness adjustment with a long press. Experiment to find your preferred light level.
  • The strip is highly flexible, allowing for creative installations around corners or irregular shapes.
  • Remember to cut only at the marked positions to ensure proper functionality.

10. Support and Documentation

For additional information or detailed guides, please refer to the official user manual PDF:

View User Manual (PDF)

For further assistance, please contact saimili customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.