1. Introduction
Thank you for choosing the Attack Shark M87 Pro Hot-Swap Mechanical Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your new keyboard. The M87 Pro is a high-performance 87-key (Tenkeyless) mechanical keyboard featuring tri-mode connectivity, customizable RGB lighting, and a durable Gasket Leaf Spring Structure.
2. Product Features
- 87-Key Layout (TKL): Compact design while retaining essential functionality.
- Tri-Mode Connectivity: Supports Bluetooth, 2.4GHz wireless, and USB-C wired connections.
- Hot-Swappable Switches: Full key hot-swapping compatible with most 3-pin and 5-pin mechanical switches.
- White Jade Switches: Unique self-developed switches offering a distinct tactile and auditory experience.
- Gasket Leaf Spring Structure: Provides a pleasant typing feel and sound.
- 5-Layer Sound Dampening: Incorporates PORON sandwich cotton, IXPE shaft underpad, PET singing pad, shaft seat soundproofing foam, and bottom mold opening silicone for enhanced acoustics.
- RGB Backlight & Side Wing Light Strip: Customizable full-color RGB lighting with multiple effects and music rhythm support (2.4G/wired modes).
- 4600mAh Lithium Battery: High-capacity built-in battery for extended wireless use.
- Custom Driver Software: Allows for custom lighting and macro function settings (not supported by single light versions).
- Full Key Non-Impact Design: Ensures high-speed and smooth game performance without key conflicts.
- Ergonomic Design: Adjustable tilt angle with two-stage foot support and stepped keycaps for comfortable use.
- Customized Satellite Axis: Fine-tuned stabilizers for smoother operation of larger keys.
3. Setup Instructions
3.1 Connecting Your Keyboard
The M87 Pro supports three connection modes: Bluetooth, 2.4GHz wireless, and USB-C wired. You can quickly switch between these modes using the dedicated switch on the keyboard.
3.1.1 USB-C Wired Connection
- Locate the USB-C port on the keyboard.
- Connect the provided USB-C cable to the keyboard and the other end to your computer's USB port.
- Ensure the mode switch on the keyboard is set to the wired (USB-C) position.
- The keyboard will be automatically recognized by your operating system.
3.1.2 2.4GHz Wireless Connection
- Locate the 2.4GHz USB receiver (dongle) in the keyboard packaging.
- Plug the USB receiver into an available USB port on your computer.
- Ensure the mode switch on the keyboard is set to the 2.4GHz wireless position.
- The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (usually indicated by an icon) to initiate pairing.
3.1.3 Bluetooth Connection
The Bluetooth mode supports connecting up to three devices simultaneously.
- Ensure the mode switch on the keyboard is set to the Bluetooth position.
- On your device (computer, laptop, tablet), open Bluetooth settings.
- On the keyboard, press and hold Fn + 1, Fn + 2, or Fn + 3 to enter pairing mode for the respective Bluetooth channel. The indicator light will flash.
- On your device, search for "Attack Shark M87 Pro" (or similar) and select it to pair.
- Once paired, the indicator light on the keyboard will stop flashing. Repeat for other devices on different channels if desired.
3.2 Initial Charging
The keyboard is equipped with a built-in 4600mAh lithium battery. For optimal performance, it is recommended to fully charge the keyboard before its first wireless use.
- Connect the keyboard to a USB power source using the USB-C cable.
- The charging indicator (if present, usually near the USB-C port or on the OLED screen) will show charging status.
- A full charge typically takes a few hours.
3.3 Custom Driver Installation
To unlock advanced customization options for lighting and macros, install the Attack Shark custom driver software. This software supports wired and 2.4GHz wireless modes. Note: Single light versions of the keyboard do not support custom drivers.
- Visit the official Attack Shark website to download the latest driver software for the M87 Pro.
- Follow the on-screen instructions to install the software.
- Connect your keyboard via USB-C or 2.4GHz wireless to use the driver.
4. Operating Instructions
4.1 Basic Key Functions
The M87 Pro features an 87-key Tenkeyless layout, balancing compactness with full functionality. It includes dedicated function keys (F1-F12) and navigation keys.
4.1.1 Operating System Switch
The keyboard supports both Windows (Win) and macOS (Mac) operating systems. Use the dedicated switch to toggle between Win and Mac modes for proper key mapping.
4.2 Backlight Control
The M87 Pro features vibrant RGB backlighting and side wing light strips. You can cycle through various lighting effects and adjust brightness directly on the keyboard or through the custom driver software.
- Changing Effects: Use Fn + [key] combinations (refer to keyboard legends or driver software for specific keys) to change lighting modes.
- Brightness Adjustment: Use Fn + Arrow Up/Down keys to adjust backlight brightness.
- Music Rhythm Mode: Available in 2.4GHz wireless and wired modes. Not supported by single light versions.
4.3 Ergonomic Adjustments
The keyboard is designed with ergonomics in mind, featuring a tilt design and two-stage adjustable foot support to reduce fatigue during long-term use.
- Flip out the foot supports on the underside of the keyboard to adjust the typing angle. There are three different height options.
5. Maintenance
5.1 Cleaning
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning between keys, use compressed air to remove dust and debris.
- Avoid spraying liquids directly onto the keyboard.
5.2 Keycap and Switch Replacement (Hot-Swapping)
The M87 Pro features full key hot-swapping, allowing you to easily change switches and keycaps without soldering.
- Use the provided keycap puller to gently remove the desired keycap.
- Use the provided switch puller to carefully extract the switch from its socket.
- Align the pins of the new switch with the holes in the PCB and press firmly until it clicks into place. Ensure pins are not bent.
- Place the new keycap onto the switch stem.
5.3 Battery Care
- Avoid exposing the keyboard to extreme temperatures.
- If storing the keyboard for an extended period, charge it to approximately 50% to prolong battery life.
- Use only the provided USB-C cable or a certified equivalent for charging.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Keyboard not responding (Wired) | Loose cable connection; incorrect mode selected. | Ensure USB-C cable is securely connected. Check if the mode switch is set to wired. Try a different USB port or cable. |
| Keyboard not responding (Wireless 2.4GHz) | USB receiver not plugged in; incorrect mode; low battery. | Plug in the 2.4GHz USB receiver. Ensure mode switch is set to 2.4GHz. Recharge the keyboard. Re-pair by holding Fn + 2.4G key. |
| Keyboard not responding (Bluetooth) | Not paired; incorrect channel; low battery; device Bluetooth off. | Ensure mode switch is set to Bluetooth. Check device Bluetooth is on. Re-pair by holding Fn + 1/2/3. Recharge the keyboard. |
| Backlight not working or incorrect | Backlight turned off; low brightness; driver issue. | Adjust brightness using Fn + Arrow Up/Down. Cycle through effects. Ensure custom driver is installed and running if using custom settings. |
| Custom driver not detecting keyboard | Incorrect connection mode; single light version. | Ensure keyboard is connected via USB-C or 2.4GHz wireless. Remember, single light versions do not support custom drivers. |
| Keys feel inconsistent after hot-swapping | Switch pins bent; switch not fully seated. | Carefully remove the switch, check pins for bending, straighten if necessary, and reinsert firmly until it clicks. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Attack Shark |
| Model | M87 Pro |
| Keyboard Standard | 87 Keys (Tenkeyless) |
| Operation Style | Mechanical (White Jade Switches) |
| Interface Type | USB-C (Wired), 2.4GHz Wireless, Bluetooth |
| Backlight Type | MULTICOLOR (RGB) |
| Battery Capacity | 4600mAh Lithium Battery |
| Hot-Swap Support | Yes (Compatible with 3-pin/5-pin switches) |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Package Dimensions (approx.) | 45cm (L) x 19cm (W) x 7cm (H) |
| Package Weight (approx.) | 1.25 kg |
| Origin | Mainland China |
8. User Tips
- White Jade Switches: The M87 Pro features unique 'White Jade Switches'. These are designed to offer a distinct feel and sound, different from standard blue or red switches. Experiment with them to appreciate their unique characteristics.
- Driver Compatibility: If you have a single light version of the keyboard, please note that it does not support the custom driver software for advanced lighting and macro settings.
- Music Rhythm Lighting: For the music rhythm backlight feature, ensure your keyboard is connected via 2.4GHz wireless or USB-C wired mode, as this feature is not supported in Bluetooth mode.
- Keycap Removal: When removing keycaps, use the provided keycap puller and pull straight up to avoid damaging the keycap or switch stem.
- Switch Installation: When installing new switches, ensure the metal pins are perfectly straight before inserting them into the hot-swap sockets to prevent bending.
9. Warranty and Support
For any questions, technical assistance, or warranty claims, please contact the seller or the Attack Shark customer support directly. Keep your proof of purchase for warranty validation.
