1. Introduction and Overview
The Lemorele G57 is a 1080P HDMI Wireless Transmitter and Receiver kit designed to extend video signals wirelessly up to 50 meters (164 feet). It offers a plug-and-play solution for mirroring or extending content from various devices to HDMI-enabled displays without the need for complex setup or network configuration.
This device supports both 2.4G and 5G dual-band Wi-Fi for stable and fast video transmission, delivering high-definition 1080P resolution. It is ideal for presentations, home entertainment, and educational settings.
2. Package Contents
Please verify that all items are present in your package:
- 1x Lemorele Wireless HDMI Transmitter (TX)
- 1x Lemorele Wireless HDMI Receiver (RX)
- 2x USB Power Cables
- 1x 19.6-inch HDMI Extension Cable
- 1x User Manual
3. Setup Instructions
The Lemorele G57 is designed for plug-and-play operation, requiring no software installation or complex configuration.
- Connect the Transmitter (TX): Plug the TX unit into the HDMI output port of your source device (e.g., PC, laptop, camera, set-top box). If the HDMI port is in a tight space, use the provided 19.6-inch HDMI extension cable.
- Power the Transmitter (TX): Connect one of the USB power cables to the TX unit and plug the other end into a USB power source (e.g., your laptop's USB port, a USB wall adapter).
- Connect the Receiver (RX): Plug the RX unit into the HDMI input port of your display device (e.g., TV, monitor, projector).
- Power the Receiver (RX): Connect the second USB power cable to the RX unit and plug the other end into a USB power source (e.g., your TV's USB port, a USB wall adapter).
- Automatic Connection: The TX and RX units should automatically pair and establish a wireless connection. The video from your source device will then be displayed on your connected screen.
4. Operating Instructions
The Lemorele G57 supports various operating modes and features:
4.1. Screen Mirroring (Same Screen Mode)
- In this mode, the content on your source device (e.g., laptop, smartphone) is mirrored directly to the large display.
- The small screen and the large screen are synchronized.
- This mode can be used without a router or data network.
- Supports Apple/Android mobile phones and personal computers.
4.2. Screen Projection (Push) Mode
- After content is sent from your source device to the large screen, you can exit the playback interface on your source device for other operations.
- Turning off your source device's screen or turning off the device itself will not affect the large screen's continued playback.
- This mode does not consume mobile phone data or power from the mobile phone.
- Supports DLNA (push) function.
- Supports Google Chrome screen projection function.
- Supports Google Home App.
4.3. Dual-Band Wi-Fi and Networking
- The receiver supports 5G/2.4G dual-band Wi-Fi for stable and fast transmission.
- Wi-Fi networking can be set up through buttons on the device, simplifying the process compared to other similar devices.
4.4. Multi-Transmitter Pairing
Up to 8 TX units can be paired with a single RX unit, allowing multiple users to share content on one display, ideal for collaborative environments.
4.5. Online Upgrades
The device supports online firmware upgrades to ensure optimal performance and access to new features.
5. Maintenance
To ensure the longevity and optimal performance of your Lemorele G57 Wireless HDMI Transmitter and Receiver, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the devices. Do not use liquid cleaners or aerosols, as they may damage the components.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handling: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.
- Ventilation: Ensure that the devices have adequate ventilation during operation to prevent overheating.
6. Troubleshooting
If you encounter issues with your Lemorele G57, please refer to the following troubleshooting steps:
- No Signal on Display:
- Ensure both the TX and RX units are properly powered via their respective USB cables.
- Verify that the TX unit is securely plugged into the HDMI output of your source device and the RX unit into the HDMI input of your display.
- Check that your display is set to the correct HDMI input source.
- Try restarting both the source device and the display.
- Poor Video Quality or Intermittent Signal:
- Ensure the TX and RX units are within the recommended operating range (up to 50m) and have a clear line of sight. Obstacles like walls or furniture can degrade signal quality.
- Minimize interference from other wireless devices operating on similar frequencies (e.g., other Wi-Fi routers, microwaves).
- Ensure the USB power sources provide sufficient power to both units.
- Compatibility Issues with Windows 11:
- Some users have reported compatibility issues with Windows 11. While it works with Windows 10, if you experience problems on Windows 11, ensure your operating system and graphics drivers are up to date.
- Consider testing with a Windows 10 device if available to confirm device functionality.
- Audio Issues:
- Check the audio settings on your source device and ensure the correct audio output is selected.
- Verify that your display's audio is not muted or set to a very low volume.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Lemorele |
| Model Number | G57 |
| Item Type | TV stick (Wireless HDMI Transmitter & Receiver) |
| Type | High Definition |
| Connectors | HDMI-Compatible |
| Decode Ability | 1080P (Full-HD) |
| Resolution | 1080p |
| Wi-Fi Frequency | 5GHz (also supports 2.4GHz) |
| Wi-Fi Range / Transmission Distance | 50m / <50m (164ft) |
| Antenna Type | Internal |
| Function | Multiple-Input Single-Output |
| Certification | CE, RoHS |
| Origin | Mainland China |
| High-concerned chemical | None |
7.1. Package Dimensions and Weight
- Length: 27 cm
- Width: 17 cm
- Height: 4 cm
- Weight: 0.247 kg
8. User Tips
- Universal Compatibility: The device is compatible with a wide range of HDMI-enabled displays, including TVs, monitors, and projectors.
- Mobile Device Support: It supports both Apple (iPhone) and Android mobile phones for screen mirroring and projection.
- Windows 11 Note: While generally compatible, some users have noted potential issues with Windows 11. Ensure your system is updated, and if problems persist, consider using a Windows 10 device or contacting support.
- Ease of Use: The plug-and-play functionality means you can start using it almost instantly without needing to install drivers or configure network settings.
- Power Source: Always ensure both the TX and RX units receive stable power from a reliable USB source for uninterrupted performance.
9. Warranty and Support
The Lemorele G57 Wireless HDMI Transmitter Receiver comes with a 1-year warranty, ensuring coverage for manufacturing defects and malfunctions under normal use.
For technical assistance, troubleshooting, or warranty claims, please contact Lemorele customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty services.