Tinsol WT-123

Contents

TINSOL Automatic Curling Iron User Manual

Model: WT-123

Professional Ceramic Auto-Rotating Air Curling Iron

Introduction

Thank you for choosing the TINSOL Automatic Curling Iron. This device is designed to provide effortless and beautiful curls with advanced hair care technology. Its ceramic coating helps reduce hair damage while emitting negative ions for smooth, frizz-free results. Please read this manual carefully before use to ensure safe and effective operation.

TINSOL Automatic Curling Iron with a model showing curled hair
TINSOL Automatic Curling Iron: Designed for easy, damage-free curling.

Setup

  1. Unpack: Carefully remove the curling iron and all accessories from the packaging.
  2. Inspect: Check the device and power cord for any signs of damage. Do not use if damaged.
  3. Power Connection: Ensure your power outlet matches the device's voltage (100-240V). Insert the appropriate plug type (UK, US, EU, AU) into a suitable power socket.
  4. Placement: Place the curling iron on a heat-resistant, flat surface away from water or other liquids.

Operating Instructions

Turning On and Off

  • To turn on or off, press and hold the power switch (labeled with a power icon) for 3 seconds.

Adjusting Temperature

This appliance features 4 temperature settings to suit various hair textures:

  • 160°C (320°F): Fragile/damaged hair
  • 180°C (356°F): Soft & thin hair
  • 200°C (392°F): Normal hair
  • 220°C (428°F): Thick & coarse hair

After turning the machine on, press the power button repeatedly to cycle through and select the desired temperature. The indicator lights will show the selected temperature.

Diagram showing 4 adjustable temperatures for different hair types
Temperature settings for various hair types.

Adjusting Curl Direction

In the power-on state, press the L (Left) or R (Right) direction key to select the desired winding direction for your hair.

Diagram of the curling iron controls, showing left and right curl buttons, switch, and temperature settings
Control buttons for power, temperature, and curl direction.

How to Curl Your Hair

  1. Take a moderate amount of dry hair.
  2. Place the root part of the hair into the hair slot.
  3. Press the left or right button to automatically curl the hair.
  4. Once the hair is wrapped up, hold it for 10-20 seconds.
  5. When you hear the end prompt "drip" (a beep sound), release the hair and let it cool off to set the curl.
Three-step visual guide on how to use the automatic curling iron
Step-by-step guide for curling hair with the automatic iron.
Image demonstrating automatic unwinding and quick styling
The automatic unwinding feature allows for quick styling.

Cleaning and Maintenance

  • Water Resistance: This machine is NOT waterproof. It is strictly forbidden to wash the product with water or immerse it in water or other liquids to avoid short circuits.
  • Exterior Cleaning: The exterior can be wiped with a soft, dry cloth.
  • Internal Cleaning: When cleaning the internal stick, unplug the device and allow it to cool completely. Use a cotton stick with alcohol for deep wiping.
  • Storage: After each use, ensure the power switch is turned off and the thermal panel has cooled down before storing the device.
  • Safety: Store the appliance in a place inaccessible to children. After turning on the power, do not touch the thermal panel by hand to prevent burns.
  • Child Supervision: This appliance is not intended for use by individuals with insufficient physical, sensory, mental experience, or knowledge (including children), unless under the supervision or direction of a person responsible for their safety. Children should be monitored to ensure they do not play with electrical appliances.
  • Power Cord: If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.
Diagram showing operation tips, cleaning and maintenance precautions, and a merchandise guarantee table
Important safety, operation, and maintenance information.

Troubleshooting

If you encounter any issues with your TINSOL Automatic Curling Iron, please refer to the following common solutions:

Problem Possible Cause Solution
Device does not turn on Not plugged in correctly; Power button not held long enough; Power outage. Ensure the device is securely plugged into a working outlet. Press and hold the power button for 3 seconds. Check your power supply.
Hair not curling effectively Incorrect temperature setting for hair type; Hair section too large; Not holding hair in slot long enough. Increase temperature for thicker/coarser hair. Use smaller sections of hair. Hold hair in the curling slot for the recommended 10-20 seconds.
Hair gets tangled or pulled Hair not properly placed in the slot; Hair section too large; Incorrect rotation direction. Ensure hair is smoothly placed into the slot. Use smaller, manageable sections. Experiment with L/R rotation to find the best direction for your hair section.
Device overheating or unusual smell Internal malfunction. Immediately unplug the device and discontinue use. Contact customer support for assistance.

If the problem persists after trying these solutions, please contact customer support.

Specifications

Feature Detail
Model Number WT-123 (also known as 100 automatic hair curler)
Power (W) 34W
Power Source Electric, Plug-in
Voltage 100-240V (Dual voltage)
Temperature Settings 160°C, 180°C, 200°C, 220°C (Digital Temperature Controller)
Min. Temperature 160°C
Max. Temperature 230°C
Material of Thermal Plate/Bar Tourmaline ceramic
Diameter of Thermal Conductor 21mm-30mm
Dimensions of Heating Plate 60x15mm
Power Cord Tail Assembly Mode 360° Rotatable
Cable Length 2 meters
Service life of thermal plate/bar More than 50,000 times
Applicable Hair Dry
Functions Automatic Power Off, International Voltage, Anti Scalding
Material Acrylic
Certification CE
Package Dimensions (L x W x H) 31cm x 9cm x 8cm
Package Weight 0.535 kg
Diagram illustrating the advanced ceramic coating technology layers
Advanced Hair Care Ceramic Coating Technology for smooth, frizz-free hair.

User Tips

Based on user experiences, here are some tips for getting the best results:

  • Temperature Adjustment: For more defined curls, especially on normal to thick hair, consider using higher temperature settings like 200°C or 220°C. Lower temperatures may result in looser waves.
  • Root Zone: Be aware that approximately 8 centimeters of the root zone may remain uncurled due to the design of the automatic curling mechanism.
  • Efficiency: This curling iron is efficient, even for thick and long hair, potentially reducing styling time significantly compared to traditional curling irons.
  • Curl Hold: Many users find that curls hold well without the need for additional hair fixatives.
  • Avoiding Tangles: Pay attention to how the hair is rotated. If hair feels like it's pulling, adjust the section size or the direction of rotation. Ensure hair is smoothly placed into the slot.
  • Hair Length: While effective for various lengths, some users with very long hair have reported mixed results compared to those with medium-length hair.

Warranty and Support

For merchandise guarantee and repair services, please refer to the information below:

Field Details
Product Name Automatic hair curler
Date
Name After-sales service providers
User Tel
Address

For further assistance or to view the original user manual in PDF format, please refer to the official documentation provided by the seller. A PDF version of the user manual is available here.

© 2023 TINSOL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.