1. Introduction
The MatSee Plus PJ-ZGD01 is a smart ZigBee garage door opener controller designed to integrate with your existing wired garage door opener. It allows for remote control, voice control via smart assistants like Alexa and Google Home, and scheduling functions through the Tuya Smart or Smart Life mobile applications. This device enhances the convenience and security of your garage access.
2. Package Contents
Please verify that all items are present in your package:
- 1 x ZigBee Garage Door Opener Controller Module
- 1 x Wired Door Sensor (5m cable)
- 1 x Power Cable (1.5m)
- 1 x Signal Control Cable (0.5m)
- Mounting Accessories (screws, wall plugs, double-sided adhesive tapes, brackets)
- 1 x User Manual (this document)

Figure 2.1: Included components in the package.
3. Specifications
| Attribute | Value |
|---|---|
| Brand Name | MatSee Plus |
| Model Number | PJ-ZGD01 |
| Power Source | AC |
| Input Voltage | AC100-240V 50/60Hz |
| Output | No |
| Communication Method | Zigbee |
| Protocol | ZigBee |
| State of Assembly | Ready-to-Go |
| App Name | Tuya Smart, or Smart Life |
| Control | App Remote Control |
| Timer Function | Timer to Open and Close |
| WiFi Frequency | 2.4GHz (does not support 5GHz) |
| Battery Included | No |
| Inbox Adaptor | Yes |
| Origin | Mainland China |
| Certification | CE, RoHS |

Figure 3.1: Module Dimensions.
4. Setup & Installation
4.1 Pre-installation Notes
- This module requires a Tuya ZigBee Gateway to function. Ensure you have one set up before proceeding.
- Verify compatibility with your existing garage door opener. You can test compatibility by using pliers to momentarily short-circuit the wall button terminals on your opener. If the garage door opens or closes, it is compatible with this smart controller.

Figure 4.1: Compatibility Test.
4.2 Wiring Diagram
The smart garage door controller acts as a companion device to your existing wired garage door opener. Its main working principle involves connecting to the power supply and the signal control terminals of your opener.

Figure 4.2: Wiring Diagram. Wire order for S1-S4 does not matter.
4.3 Sensor Installation
It is crucial to install the sensor correctly to ensure accurate status reporting. Keep your garage door closed during sensor installation.
- Find a suitable position on the garage door to mount the two parts of the sensor.
- Ensure that when the garage door is closed, the distance between the two sensor parts is less than 30mm.
- When the garage door is open, the two sensor parts should be well separated.
- You can use the included double-sided adhesive tapes, screws, or brackets for sensor fixation.

Figure 4.3: Sensor Mounting Method (Diagram A).

Figure 4.4: Sensor Mounting Method (Diagram B).
4.4 Device Deployment
We recommend deploying the smart controller module on top of your existing garage door opener. Use the provided double-sided adhesive tapes for fixation if necessary.

Figure 4.5: Device Deployment.
Once all connections are made, power on both your existing garage door opener and the smart garage door opener controller. Allow approximately 1 minute for the smart controller to reconnect to the cloud service automatically.
5. App Setup & Pairing
5.1 Download the App
Download the Smart Life or Tuya Smart app from your device's app store (Apple App Store for iOS or Google Play Store for Android).

Figure 5.1: Network Diagram and App Icons.
5.2 Pairing Process
Attention: Ensure your Tuya ZigBee gateway is already configured and within range of the garage door controller. Your smartphone should also be within range of the gateway during pairing. A ZigBee Range Extender can be used if needed.
- Power on the Smart Garage Door Controller.
- Open the Smart Life or Tuya Smart app and navigate to your ZigBee gateway.
- Press the pairing button on the controller module for 5 seconds until its indicator light flashes.
- In the app, click the '+' icon to add a subdevice. The app will discover nearby devices.
- Once discovered, confirm the addition.
- If the LED is not blinking, reset the device by powering it on, then holding the RESET button for 5 seconds.
Video 5.1: Unboxing and App Pairing Demonstration.
This video demonstrates the unboxing of the product and the steps to pair the device with the Tuya Smart Life app via a ZigBee gateway, including testing the sensor functionality.
5.3 Sensor Functionality Check
After connecting the sensor cable to the module (wire order does not matter), move the sensor parts to simulate opening and closing the garage door. Check the app to ensure it accurately reflects the 'Opened' and 'Closed' status.

Figure 5.2: Sensor Functionality Test in App.
6. Operating Instructions
Once successfully paired, you can control and monitor your garage door using the Smart Life or Tuya Smart app.
6.1 Remote Control
Open or close your garage door from anywhere using the mobile app. This is particularly useful when you're approaching home or need to grant access remotely.

Figure 6.1: Remote Control via App.
6.2 Voice Control (Alexa & Google Home)
Integrate your garage door controller with Amazon Alexa or Google Home for hands-free operation.
- For Amazon Alexa:
- Ensure the device name in your Smart Life/Tuya app is consistent with what you'll call it (e.g., "Garage Door Opener").
- Use commands like: "Alexa, turn on Garage Door" or "Alexa, turn off Garage Door."
- For Google Home:
- Download the Google Home app and set up your Google Home device.
- In the Google Home app, go to 'Home Control' to add devices. Select 'Smart Life' and log in with your previously registered credentials.
- Your device should appear in the Home Control device list.
- Use commands like: "Hey Google, turn on the Garage Door" or "Hey Google, turn off the Garage Door."

Figure 6.2: Voice Control Integration.
6.3 Timing Function
Set schedules for your garage door to open or close automatically at specific times. This can be useful for daily routines or specific events.

Figure 6.3: Timing Schedule and Timer Function.
6.4 Countdown Function
Utilize the countdown function to temporarily open the garage door for a set period, after which it will automatically close. This is ideal for deliveries or temporary access.

Figure 6.4: Countdown Function for Deliveries.
6.5 Real-time Monitoring
Check the current status of your garage door (opened or closed) at any time through the app, providing peace of mind.

Figure 6.5: Real-time Monitoring in App.
6.6 Share Device with Family
You can authorize device control to other family members who have registered a Tuya account. Use the "Share Device" function within the app to grant access.

Figure 6.6: Device Sharing Feature.
7. Maintenance
- Cleaning: Wipe the device and sensor with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Connection Check: Periodically check all wired connections to ensure they are secure and free from damage.
- Sensor Alignment: Ensure the garage door sensor remains properly aligned and the gap is within the specified 30mm when the door is closed.
- Firmware Updates: Keep the Smart Life/Tuya Smart app updated to the latest version to receive performance improvements and new features. The app may also prompt for device firmware updates.
8. Troubleshooting
- Device Not Pairing:
- Ensure your ZigBee gateway is powered on and connected to the internet.
- Verify the controller module's indicator light is flashing during pairing mode. If not, reset the device.
- Make sure your smartphone and the controller are close to the ZigBee gateway.
- Check that your Wi-Fi network is 2.4GHz, as 5GHz is not supported.
- Garage Door Not Responding:
- Confirm the controller is properly wired to your garage door opener's wall button terminals.
- Check if your existing garage door opener is powered on and functioning normally.
- Verify the app shows the correct status of the garage door.
- Sensor Not Reporting Correctly:
- Ensure the sensor cable is securely connected to the module.
- Check the physical alignment and distance of the two sensor parts. They should be less than 30mm apart when closed and clearly separated when open.
- Inspect the sensor cable for any damage.
- Voice Control Not Working:
- Confirm the device is linked correctly in your Alexa or Google Home app.
- Ensure the device name used in voice commands matches the name set in the Smart Life/Tuya app.
- Check your internet connection and the status of your smart speaker.
9. User Tips
- Regular Testing: Periodically test the remote and voice control functions to ensure everything is working as expected.
- Security: For enhanced security, consider setting a password for voice control in the app settings, especially if you have guests or children who might accidentally trigger the garage door.
- Notifications: Enable close reminders and timeout alarms in the app settings to receive alerts if your garage door is left open for an extended period.
- ZigBee Range: If you experience connectivity issues, consider adding a ZigBee range extender to improve signal strength in your garage.

Figure 9.1: App Settings for Reminders and Alarms.
10. Certifications & Compliance
This device complies with relevant safety and environmental standards.
- Certifications: CE, RoHS

Figure 10.1: Product Certifications and Quality Control.
11. Support
For further assistance, please refer to the official user manual PDF available at: User manual (PDF). You can also contact MatSeePlus Official Store for technical support.