KKMOON G202 Plus

Contents

GSM Door Gate Opener User Manual

Model: G202 Plus

KKMOON G202 Plus GSM Door Gate Opener with a smartphone and open doors

The G202 Plus GSM Door Gate Opener, shown with a smartphone for remote control and an illustration of its application with open doors.

1. Introduction

The KKMOON G202 Plus GSM Door Gate Opener is a sophisticated device designed for remote control of gates, doors, and other access systems using free phone calls or SMS commands. It offers unparalleled convenience by allowing operation from anywhere, without distance limitations. This manual provides comprehensive instructions for the proper installation, configuration, and operation of your G202 Plus device.

2. Key Features

  • Supports global 2G, 3G, and 4G communication frequencies.
  • Manages up to 1001 authorized user numbers.
  • Allows users to query their own authorized numbers.
  • Wide voltage input support: 9-36V DC.
  • Configurable relay delay closing time from 0 to 999 seconds.
  • Supports permanent relay closure until interrupted by a new command.
  • Features authorization conservation with whitelist and blacklist management.
  • Remote restart and remote reset capabilities.
  • One-click query of all authorized numbers.
  • Ability to query device status.
  • Ability to query signal strength.
  • Control the device via authorized phone calls and SMS messages.
  • Compatible with the 'Callny control' mobile application.

3. Technical Specifications

ParameterValue
ModelG202 Plus
Digital OutputNC/NO dry contact, 3A/240VAC
DC Power Supply9-24V DC/2A
Power Consumption12V input Max. 50mA/Average 25mA
SIM Card TypeStandard SIM Card (Nano SIM slot)
Antenna Interface50Ω SMA
Temperature Range-20°C to +60°C
Humidity RangeRelative humidity 90%
Compatible AppCallny control
Item Size (Approx.)10.3 x 5 x 3.1 cm (4.1 x 2 x 1.2 in)
Package Size (Approx.)11.5 x 6.3 x 4 cm (4.5 x 2.5 x 1.6 in)
Package Weight (Approx.)97g (3.4 oz)

4. Package Contents

Please check the package to ensure all items are present:

  • 1 x G202 Plus GSM Door Gate Opener Unit
  • 1 x Antenna
  • 1 x User Manual Card

5. Installation Guide

Follow these steps carefully to install your G202 Plus GSM Door Gate Opener:

  1. Insert SIM Card: Locate the Nano SIM card slot on the device. Ensure the device is powered off before inserting the SIM card. Insert a standard Nano SIM card into the slot.
  2. Attach Antenna: Screw the provided 50Ω SMA antenna onto the antenna interface connector on the device. Ensure it is securely fastened for optimal signal reception.
  3. Power Connection: Connect a DC power supply (9-24V DC/2A) to the DC 9-36V terminals (+ and -) on the device. Ensure correct polarity.
  4. Relay Output Wiring: Connect the relay output (NO, COM, NC) to your gate, door, or access control system. The specific wiring will depend on whether your system requires a Normally Open (NO) or Normally Closed (NC) contact closure. Refer to the diagrams below for common wiring scenarios.

5.1 Wiring for a Light/Appliance

This diagram illustrates how to connect the G202 Plus to control a standard light or appliance using the relay output.

Wiring diagram for connecting the G202 Plus GSM Gate Controller to a light fixture. Shows DC power supply connected to DC 9-36V terminals, and the light's L and N wires connected to the Relay Output COM and NO terminals, respectively.

Wiring diagram for controlling a light fixture. The DC power supply connects to the DC 9-36V terminals. The light's Live (L) and Neutral (N) wires are connected to the Relay Output's COM (Common) and NO (Normally Open) terminals, respectively, allowing the relay to switch the light.

5.2 Wiring for an Access Control Keypad

This diagram shows how to integrate the G202 Plus with an access control keypad, typically to trigger a door release mechanism.

Wiring diagram for connecting the G202 Plus GSM Gate Controller to an access control keypad. Shows DC power supply connected to DC 9-36V terminals, and the keypad's DC+ and DC- connected to the Relay Output COM and NO terminals, respectively.

Wiring diagram for integrating with an access control keypad. The DC power supply connects to the DC 9-36V terminals. The keypad's DC+ and DC- are connected to the Relay Output's COM (Common) and NO (Normally Open) terminals, allowing the relay to activate the keypad's function.

6. Operating Instructions

The G202 Plus can be operated via authorized phone calls, SMS commands, or the dedicated mobile application.

6.1 Authorizing User Numbers

Before operation, you must authorize phone numbers that will be allowed to control the device. Refer to the detailed SMS command list in the 'User Manual Card' for specific instructions on adding, modifying, and deleting authorized numbers. The device supports up to 1001 authorized numbers and features whitelist/blacklist management.

6.2 Remote Control via Free Call

Once a number is authorized, simply dial the SIM card number inserted in the G202 Plus. The device will recognize the authorized number, reject the call (to avoid charges), and activate the relay output. The relay will remain active for the configured delay time (0-999 seconds) or permanently if set to do so.

6.3 Remote Control via SMS Commands

For more advanced control, such as setting relay delay times, querying device status, or managing authorized numbers, send specific SMS commands to the device's SIM card number. A comprehensive list of SMS commands is provided in the 'User Manual Card'.

6.4 Using the 'Callny control' App

The 'Callny control' mobile application provides a user-friendly interface for managing and operating your G202 Plus. Download the app from your smartphone's app store. You may need to register the device using its IMEI code, which can be obtained via an SMS command (refer to the 'User Manual Card'). The app allows for easy authorization management, status checks, and remote control.

6.5 Remote Restart and Reset

The device supports remote restart and reset functions via SMS commands. These can be useful for troubleshooting or re-initializing the device without physical access.

7. Maintenance

  • Environmental Conditions: Ensure the device is installed in a dry environment, away from direct sunlight, extreme temperatures, and high humidity. The operating temperature range is -20°C to +60°C, and humidity should not exceed 90% relative humidity.
  • Cleaning: Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Connection Checks: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
  • Antenna Placement: Ensure the antenna is positioned for optimal signal reception. Avoid placing the device in metal enclosures or areas with poor GSM signal.

8. Troubleshooting

Q: Is the device compatible with 2G, 3G, or 4G networks?
A: Yes, the G202 Plus GSM Door Gate Opener supports global 2G, 3G, and 4G communication frequencies, ensuring broad compatibility with various network providers.
Q: The device does not respond to calls or SMS.
A:
  • Check if the SIM card is correctly inserted and activated.
  • Ensure the SIM card has sufficient credit or an active plan for calls/SMS.
  • Verify that the calling number is authorized in the device's whitelist.
  • Check the GSM signal strength (can be queried via SMS command if the device is partially responsive).
  • Ensure the power supply is stable and within the 9-24V DC range.
Q: The relay does not activate.
A:
  • Confirm the wiring of the relay output (NO, COM, NC) to your gate/door system is correct according to the diagrams.
  • Check the power supply to the device.
  • Ensure the call is from an authorized number.
  • Test the relay functionality using a simple load (e.g., a small light) if possible.
Q: I forgot my authorized numbers or settings.
A: You can use the remote reset function via SMS command (refer to the 'User Manual Card') to restore factory settings, or use the one-click query command to retrieve all authorized numbers.

9. User Tips

  • Always use a reliable SIM card with good network coverage in the installation area for consistent performance.
  • Keep a record of your authorized numbers and important SMS commands for quick reference.
  • For security, regularly review and update your list of authorized numbers.
  • If experiencing signal issues, try repositioning the antenna or the device to an area with better reception.

10. Warranty and Support

For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Detailed contact information can typically be found on the product packaging or the seller's website.

11. Applications

The G202 Plus GSM Gate Controller is versatile and can be used in various scenarios:

Image showing multiple applications for the G202 Plus GSM Gate Controller, including gates, bollards, barriers, garage doors, shutters, and general access doors or machines.

Multiple applications for the G202 Plus, including controlling gates, bollards, barriers, garage doors, shutters, and various access doors or machines.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.