Kllisre DDR4 Desktop Memory User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Kllisre DDR4 Desktop Memory modules. Designed for optimal performance in desktop computers, these modules offer reliable and efficient memory solutions. Please read this manual thoroughly before installation to ensure proper setup and to maximize the lifespan and performance of your memory.

Product Overview

Kllisre DDR4 Desktop Memory is engineered to enhance your system's speed and responsiveness. Available in various capacities and frequencies, these modules are built with quality components to ensure stable operation and compatibility with a wide range of motherboards.

Key Features:

• High Performance: Available in 2666MHz and 3200MHz speeds for efficient data processing.
• Capacities: Offered in 8GB and 16GB modules to suit various computing needs.
• Stable Operation: Features an 8-layer PCB board and 15μin Golden Finger for enhanced signal integrity and reliability.
• Efficient Cooling: Equipped with a high-performance radiator, supplemented by professional 3mm thermal silica, to quickly dissipate heat and maintain optimal temperatures.
• Low Power Consumption: Designed with a low working voltage of 1.35V, contributing to energy efficiency and higher reliability.
• Wide Compatibility: Compatible with both Intel and AMD chipsets, ensuring broad system integration.
• Unbuffered and Non-ECC: Standard features for desktop memory, providing direct access to the CPU and no error correction for faster performance.

Specifications

Setup and Installation

Installing RAM is a straightforward process, but it requires careful handling to avoid damage to the modules or your motherboard. Always ensure your computer is powered off and unplugged before beginning.

Before You Begin:

• Compatibility Check: Verify that your motherboard supports DDR4 memory and the specific frequency (2666MHz or 3200MHz) and capacity of the Kllisre modules. Consult your motherboard's manual for details.
• Static Electricity: Ground yourself by touching a metal part of your computer case before handling components to discharge static electricity.
• Tools: A Phillips head screwdriver may be needed to open your computer case.

Installation Steps:

1. Prepare Your System: Shut down your computer completely and unplug the power cord from the wall outlet.
2. Open Case: Remove the side panel of your computer case to access the motherboard.
3. Locate RAM Slots: Identify the DDR4 memory slots on your motherboard. These are typically long slots with clips on either end. Refer to your motherboard manual for the correct slots for dual-channel configuration if installing two modules.
4. Open Clips: Gently push down the clips on both ends of the RAM slot to open them.
5. Align Memory Module: Hold the Kllisre DDR4 memory module by its edges, avoiding touching the gold contacts. Align the notch on the memory module with the key in the RAM slot. The module will only fit one way.
6. Insert Memory Module: Place the module into the slot and press down firmly and evenly on both ends until the clips snap into place, securing the module. You should hear a click.
7. Verify Installation: Ensure both clips are fully closed and the module is seated correctly. If installing multiple modules, repeat the process for each.
8. Close Case: Replace the side panel of your computer case.
9. Power On: Plug in the power cord and turn on your computer. The system should automatically detect the new memory.

Operating Instructions

Once installed, Kllisre DDR4 Desktop Memory operates automatically with your system. No specific software or drivers are required for basic functionality. Your operating system will recognize the new memory capacity upon boot-up.

Verifying Memory:

• Windows: Right-click on 'This PC' or 'My Computer', select 'Properties'. The installed RAM will be displayed. Alternatively, open Task Manager (Ctrl+Shift+Esc), go to the 'Performance' tab, and select 'Memory'.
• macOS: Click the Apple menu, select 'About This Mac'. The installed memory will be listed.
• Linux: Open a terminal and type free -h or cat /proc/meminfo.

For optimal performance, ensure your motherboard's BIOS/UEFI settings are configured to use the correct memory frequency (e.g., 2666MHz or 3200MHz). This may involve enabling an XMP (Extreme Memory Profile) or DOCP (D.O.C.P.) profile in your BIOS/UEFI settings.

Maintenance

Kllisre DDR4 Desktop Memory modules are designed for durability and require minimal maintenance. Following these guidelines can help ensure their longevity:

• Keep Clean: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Proper Handling: When handling memory modules, always hold them by the edges. Avoid touching the gold contacts or the chips on the module.
• Environmental Conditions: Ensure your computer operates in a well-ventilated area with stable temperature and humidity to prevent overheating and moisture damage.
• Firmware Updates: Keep your motherboard's BIOS/UEFI firmware updated, as this can sometimes improve memory compatibility and stability.

Troubleshooting

If you encounter issues after installing your Kllisre DDR4 Desktop Memory, refer to the following common troubleshooting steps:

Common Issues and Solutions:

• Computer Does Not Boot / No Display:
  • Ensure the memory modules are fully seated in their slots and the clips are locked.
  • Try installing only one module at a time to identify if a specific module is faulty.
  • Verify that the memory is compatible with your motherboard and CPU.
  • Clear your motherboard's CMOS (refer to your motherboard manual for instructions).
• Incorrect Memory Capacity Detected:
  • Check if all modules are properly seated.
  • Ensure your operating system is 64-bit to utilize more than 4GB of RAM.
  • Update your motherboard's BIOS/UEFI firmware.
• System Instability / Blue Screens of Death (BSOD):
  • Run a memory diagnostic tool (e.g., Windows Memory Diagnostic, MemTest86) to check for errors.
  • Ensure your memory is running at its rated speed and voltage in the BIOS/UEFI settings. Disable XMP/DOCP temporarily to see if stability improves.
  • Check for overheating. Ensure proper airflow in your case and that the memory's radiator is not obstructed.
• Memory Not Running at Advertised Speed (e.g., 3200MHz detected as 2133MHz):
  • Access your motherboard's BIOS/UEFI settings.
  • Enable the XMP (Extreme Memory Profile) or DOCP (D.O.C.P.) profile to set the memory to its advertised speed and timings.
  • Ensure your motherboard and CPU support the desired memory frequency.
• Product Out of Stock Error When Buying More:
  • If you encounter an 'out of stock' error when attempting to purchase additional modules, this indicates that the specific configuration (e.g., 16GB 3200MHz) is temporarily unavailable. Please check back later or contact the seller for stock updates.

User Tips

• Motherboard Compatibility: Always double-check your motherboard's specifications for supported RAM type (DDR4), maximum capacity, and supported frequencies before purchasing. This is crucial for stable operation, especially with Ryzen processors.
• Dual Channel Configuration: For optimal performance, install memory modules in pairs (e.g., two 8GB modules for 16GB total) into the correct dual-channel slots as indicated by your motherboard manual. Kllisre DDR4 memory is typically sold in 2-piece sets for this purpose.
• BIOS/UEFI Settings: After installation, enter your system's BIOS/UEFI to confirm the memory is detected correctly and to enable XMP/DOCP profiles to achieve the advertised speeds.
• System Stability: If you experience any system crashes or instability after installing new RAM, ensure the modules are firmly seated and consider running a memory test.

Warranty and Support

Kllisre DDR4 Desktop Memory modules come with a three-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.

For technical assistance, warranty claims, or further inquiries, please contact the Kllisre Official Store or your point of purchase. When contacting support, please have your product model, capacity, frequency, and proof of purchase readily available.