BOBLOV A22 Mini Body Camera User Manual

1. Introduction

Thank you for choosing the BOBLOV A22 Mini Body Camera. This manual provides essential information on the camera's functions, features, external structure, operation, and safety precautions. Please read this manual carefully before use and keep it for future reference.

Basic Information

• Product Name: BOBLOV Body Camera
• Model: A22
• Rated Input: DC 5V 1A
• Battery Rated Voltage: 3.8V DC
• Battery Capacity: 2200mAh 8.36Wh
• Manufacturer: Shenzhen LvYouYou Technology Co., Ltd

2. Safety Warnings

WARNING: Failure to follow these safety instructions could result in fire, injury, or damage to the camera or other property. Read all safety information below before using the camera.

Handling

• Handle the camera with care. Avoid exposing the device to extreme temperatures or moisture, as this may damage the device and void the warranty.
• The camera contains a battery, plastic, and sensitive electronic components. Damage can occur if burned, punctured, crushed, or exposed to liquid.
• If you suspect damage to the camera or battery, discontinue use immediately to prevent overheating or injury.
• When used as a driving recorder, do not leave the device in an outdoor car for extended periods, as high temperatures can cause the battery to expand or explode.

Battery and Charging

• Avoid exposing the device to extreme temperatures or moisture. Battery repair should only be performed by a trained technician.
• Charge the camera using the included charging cable and a 5V 1A power adapter.
• Connect the camera to your computer using a cable for charging or data transfer.
• Use a power adapter that meets applicable standards and is CCC certified.
• Do not use damaged cables or chargers. Ensure the USB connector is fully inserted into a compatible power adapter.
• Always charge the camera in a well-ventilated area.
• It is normal for the camera to become slightly warm during charging.
• If the camera is idle for a long time, charge it every 3 months.

Prolonged Heat Exposure

• Avoid direct skin contact with the device, its power adapter, or a wireless charger when it is operating or connected to a power source for long periods.
• Ensure the camera, power adapter, and any wireless charger are in a well-ventilated area during use or charging.

Choking Hazard

• Some camera accessories may pose a choking hazard to small children. Keep these accessories away from children.

General Caution

• This device records video and audio continuously. Ensure compliance with all applicable laws regarding recording devices.
• Regularly check and charge the battery. A low battery may result in incomplete recordings.
• Handle the device with care. Dropping or striking it may cause damage or data loss.
• Do not use the device for illegal purposes. Misuse may result in legal action.
• Do not cover or obstruct the camera lens or microphone, as this may impair recording quality and functionality.

3. Product Overview

Structure Diagram

Familiarize yourself with the camera's components and controls:

Image: Front, side, and rear views of the BOBLOV A22 Mini Body Camera with labels for buttons and ports.

1. Audio Record Button: Slide up/down to start/end audio recording in power off/on state.
2. Play Button/Confirm/OK Button: Acts as play/pause during playback. Short press in menu to save changes.
3. Volume +/Up Button: Short press in menu to select upwards. Increases volume during video playback. Short press to go to previous file when playback is paused. In video/photo mode, short press to turn on/off IR light.
4. Volume -/Down Button: Short press in menu to select downwards. Decreases volume during video playback. Short press to go to next file when playback is paused. (Only A22 model has IR feature).
5. USB Interface: Charging port and for transferring files when connecting to a computer.
6. Power Button/Video Record: Slide down and hold for 3 seconds to power on/off. Slide up to start video recording. Slide to middle position to save video.
7. Reset Hole: Use a pin to reset the camera if it crashes.
8. Menu Button: Long press to enter menu settings. Short press to switch between video/photo/playback modes.
9. Return Button/Off Screen: In standby/playback, short press to turn off screen display. In menu, short press to return to previous menu.
10. TF Card Slot: Insert a compatible MicroSD/TF card here.

Product Overview Video

Video: A brief overview of the BOBLOV A22 Mini Body Camera's features, including its rotatable lens, LCD screen, night vision, and various applications.

4. Setup

Inserting and Formatting the SD Card

The camera supports MicroSD/TF cards from 8GB to 128GB. Please use a high-quality A1 MicroSD card (Class 10 or above) for optimal performance. The SD card is not included with the camera.

Image: Step-by-step diagram illustrating how to insert a TF card into the camera and other basic operation steps.

1. Insert a TF card (up to 128GB MAX) into the card slot.
2. Power on the camera (ensure it is not in video or audio recording mode).
3. Long press the Menu button to enter the menu settings.
4. Navigate to the "Format" option using the Volume +/Up and Volume -/Down buttons.
5. Select "OK" and short press the Play/Confirm/OK button to confirm and format the card.

Charging the Camera

Before first use, fully charge the camera. The camera will automatically power on when connected to a power source. The red indicator light will show and remain steady. After approximately 3 hours of charging, the indicator will turn steady green, indicating a full charge.

Image: Diagram illustrating the camera's dimensions and showing it being charged while in use.

Wearing and Mounting

The A22 Mini Body Camera features a 180-degree rotatable lens, allowing for flexible wearing options and shooting angles. It can be clipped to a pocket or backpack, or attached to a bicycle using a 1/4" screw port (bike mounts not included).

Image: Demonstrates two methods of clamping the A22 camera to a uniform pocket, one with the clip visible and one with the camera inserted into the pocket.

Image: A person attaching the A22 camera to a bicycle handlebar mount using its 1/4" screw port.

5. Basic Operation

Power On/Off

• Power On: In the power-off state, slide the Power Button/Video Record button down and hold for 3 seconds. The recorder will turn on and enter standby mode for real-time monitoring.
• Power Off: In standby mode, slide the Power Button/Video Record button down and hold for 3 seconds to turn it off.

Take Photo

• In standby mode, short press the Menu button to switch to the photo preview interface.
• Short press the Play/Confirm/OK button to take a photo. Each press will take one photo, and the blue indicator will flash once.
• Note: The camera cannot take snapshots simultaneously while video recording.

Video Recording

Method 1 (From Power-off State):

1. Slide up the Power Button/Video Record button to power on the device and start video recording. The blue indicator will flash slowly.
2. To save the current file and stop recording, slide the button down to the middle position. The blue indicator will turn off, and the interface will display the recently recorded video.

Method 2 (From Standby Preview Interface):

1. Push up the Power Button/Video Record button to start video recording. The blue indicator will flash slowly.
2. While recording, push the button down to the middle position to save the current file and stop recording. The blue indicator will turn off, and the interface will display the recently recorded video.

Audio Recording

Method 1 (From Power-off State):

1. Push up the Audio Record button to power on the device and start audio recording. The blue indicator will flash slowly.
2. Push the button down to save the current file and stop audio recording. The indicator will turn off, and the interface will go to the audio file page.

Method 2 (From Standby Preview Interface):

1. Push up the Audio Record button to start audio recording. The blue indicator will flash slowly.
2. Push the button down to save the current file and stop audio recording. The indicator will turn off, and the interface will go to the audio file page.

Night Vision

The A22 model supports manual night vision with 4 invisible IR lights for clear recording in dark environments.

Image: A split image demonstrating the difference in recording quality between day and night, highlighting the camera's night vision capabilities.

Image: A scene depicting a person in a dark room, with an inset showing the camera's screen and the instruction to "Click + button to turn on/off the IR mode" for manual night vision.

• In standby/video/photo mode, short press the "Volume+" button to switch to night vision mode manually.
• Press it again to return the real-time image to color.

LCD Off Mode / Auto Power Off

• The device has a power-saving function. By default, it enters LCD Off mode after 5 minutes of inactivity. Short press any key to light up the screen.
• The "LCD Off" setting can be adjusted in the menu (1, 2, 3, 5, 10 minutes, or Off).
• A short press of the Return button can also turn off the screen display in any status (except during menu settings).
• The camera will automatically shut down after a set time in standby mode. The "Auto power off" setting can be adjusted in the menu (1, 3 minutes, or Off).

Files View/Playback

• Power on the camera. Short press the Menu button to switch to playback mode.
• Use the Volume +/Up and Volume -/Down buttons to select the desired file.
• Press the Play/Confirm/OK button to play the file. Press again to pause.
• Short press the Menu button to return or exit.
• During playback, use the Volume +/Up and Volume -/Down buttons to adjust the volume.

File Delete/Protection

Deletion from the Camera:

1. In playback mode (short press Menu button to enter playback from standby), use the Volume +/Up and Volume -/Down buttons to select the file to be deleted.
2. Long press the Menu button to access the "Delete" and "Protect" options.
3. Use the Volume +/Up and Volume -/Down buttons to select "Delete Current" or "Delete All".
4. Press the Play/Confirm/OK button to choose "OK" and delete the files.
5. Note: Videos marked as protected during recording cannot be deleted unless unlocked.

Deletion from PC:

1. Connect the camera to a computer.
2. On the camera, use the Volume +/Up and Volume -/Down buttons to select "Mass Storage" and press the Play/Confirm/OK button to confirm.
3. Access the camera's disk on your computer to copy or delete recorded files.

File Protection:

• The lock/protect option is only valid for video files.
• In playback mode, long press the Menu button to select the file to be protected.
• Use the Volume +/Up and Volume -/Down buttons to confirm "Protect" and select "Lock Current" or "Lock All".
• Press the Play/Confirm/OK button to save the protection setting.

File Transfer/Connect Computer

• Connect the camera to your computer with a standard USB cable.
• When the recorder displays "Mass Storage", it indicates a successful connection, and the camera's disk can be accessed.
• Video files (MOV format), photo files (JPG format), and audio files (WAV format) are all stored in the DCIM folder.

Reset

If the camera freezes or stops working, you can perform a reset by gently pressing the reset button with a pin or thimble. Do not use excessive force.

Image: Close-up view indicating the location of the reset button on the side of the camera.

The device will automatically shut down after a reset and can be rebooted by sliding down and holding the Power Button for a few seconds.

Indicator Light

• When charging or connected to a computer, the red light is steady on. The green light stays on when fully charged.
• The blue indicator light flashes slowly during video recording.
• The blue indicator light stays on for 2 seconds then goes out when taking photos.
• The blue indicator light flashes slowly during audio recording.
• The indicator light can be turned off in the menu settings.

Image Rotation Function

The mini camera lens supports 180 degrees of manual rotation. There is also an "Image Rotation" option in the menu settings, which is Off by default.

Image: Diagram illustrating the 180-degree rotatable lens of the camera, showing different angles (0°, 90°, 180°).

Circumstance 1: Lens on the side of the back clip (Image Rotation option Off)

If the lens is on the side of the back clip and the "Image Rotation" option in the menu setting is Off, the image direction will be correct.

Image: A person wearing the camera clipped to their shirt pocket, demonstrating a correct image orientation when the lens is on the side of the back clip and image rotation is off.

Circumstance 2: Lens on the side of the screen (Image Rotation option On)

If the lens is on the side of the screen, the image will be flipped. Enter the menu settings and set the "Image Rotation" option to On to correct the image direction.

Image: A person wearing the camera clipped to their shirt pocket, demonstrating a flipped image orientation when the lens is on the side of the screen, requiring the image rotation setting to be enabled.

If the preview or recorded image is flipped/upside down:

1. Rotate the camera lens manually by 180 degrees to check if the image direction is corrected.
2. Enter the menu setting and turn on the "Image Rotation" function.

6. System Settings / Menu List

After powering on the device or in standby mode, long press the Menu button to enter the menu settings. Use the Volume +/Up and Volume -/Down buttons to select options, then press the Play/Confirm/OK button to confirm. Short press the Return button to go back or exit the menu.

7. Specifications

8. Troubleshooting

Abnormal Alarm

• A text prompt will appear on the screen when the battery is low.
• A text prompt will appear on the screen when the memory is full or no Micro SD card is inserted.

Q&A

Q: Can't turn on or camera crashes, no response to keystrokes?

1. Charge the camera for at least half an hour, then try to turn it on.
2. Press the Reset button once, then restart.

Q: Black screen appears after powering on.

1. The screen may enter power-saving mode after 5 minutes or if the return button was pressed mistakenly. Press any button to light up the screen.
2. Press the Reset button once, then restart the camera.
3. Check if the "LCD Off" option is enabled in the menu. If you want the display to be always on, set "LCD Off" to Off. This option can be set to off/1 min/2 min/3min/5 min/10min.
4. If the issue persists, the display screen might be defective. Contact customer service.

Q: Incorrect system date and time.

Set your date and time again in the menu settings. Long press the Menu button to enter menu settings, press Volume +/Up and Volume -/Down buttons to find "Date/Time", press Play/Confirm/OK button to enter, use Volume +/Up and Volume -/Down buttons to change, then press Play/Confirm/OK button to confirm.

Q: The computer prompts "Please reconnect the device" or the camera disk isn't recognized.

1. Use another compatible USB cable.
2. Check if the camera's USB interface or the computer's USB port is damaged.
3. If the issue persists, contact customer service.

Q: The screen displays a red color.

1. Press the Volume +/Up button twice to reset the lens.
2. The lens might be malfunctioning. Contact customer service.

Q: A video or audio cannot be played, or there is no sound for videos?

Turn the camera's volume to the loudest setting to check if sound plays normally on the device itself. It is recommended to play videos/audio on your computer using a media player like VLC.

Q: The preview image or recording image is flipped/upside down:

1. Rotate the camera lens manually by 180 degrees.
2. Enter the menu setting to turn on the "Image Rotation" function.

9. User Tips

• Battery Management: The camera offers good battery life (up to 10 hours recording), but regular charging is crucial to avoid incomplete recordings. If idle, charge every 3 months.
• Image Quality: While the camera provides clear footage sufficient for recognizing objects and identifying license plates in low-movement scenarios, do not expect fine details.
• Night Vision: The night vision feature works effectively in dark environments. Remember to manually activate it using the Volume +/Up button if needed.
• Motion Detection: Some users have noted that motion detection may not be present despite being advertised. Verify this feature in your specific unit's menu.
• Playback Compatibility: For optimal playback on a computer, using a media player like VLC is recommended.
• SD Card: A MicroSD card is not included. Ensure you use a high-speed Class 10 or above card for reliable recording.
• Water Resistance: Note that the rubber blocking water has been removed in newer versions, so take precautions against moisture.

10. Support & Warranty

BOBLOV is dedicated to offering the best service to its valuable customers. For any support needs, please use the contact information below:

• Official Email Address: support@boblov.com
• Official Website: www.boblov.com
• Facebook: www.facebook.com/BOBLOVGlobal/
• YouTube: https://www.youtube.com/@boblovitd
• Instagram: https://www.instagram.com/boblov_ltd/
• Telephone: +1 (213) 905-9206
• Address: 10700 Jersey Blvd #730 Rancho Cucamonga, CA 91730 USA

For a detailed PDF version of the user manual, please refer to the official BOBLOV website or contact customer support.