1. Introduction
The MRSVI W3 is a versatile 2.4G wireless remote controller that combines the functions of a traditional remote, a full QWERTY keyboard, and an air mouse with voice control capabilities. It is designed to enhance your experience with Android TV boxes, Windows PCs, and other compatible devices.

Figure 1: MRSVI W3 Remote Controller Overview
Video 1: MRSVI W3 Product Overview
2. Package Contents
- MRSVI W3 Remote Controller x 1
- 2.4G USB Receiver x 1

Figure 2: Remote Controller and USB Receiver
3. Setup
3.1. Compatibility
The MRSVI W3 is compatible with a wide range of devices. Please review the compatibility chart below:

Figure 3: Device Compatibility
Works With:
- Android TV Box
- Network Player
- Computer (Windows, Mac OS, Linux)
- HTPC
- Smart TV (Note: May not be compatible with Samsung, Sony, Panasonic, LG)
Not Supported:
- Samsung TVs
- Sony TVs
- Panasonic TVs
- LG TVs
- Fire TV Stick
- Apple Devices
3.2. Pairing the USB Receiver and Air Mouse
Normally, all air mice are pre-paired with the USB receiver before sale, allowing direct use after plugging in the receiver. If the connection is lost due to incorrect operation, follow these steps to re-pair:
- Insert the 2.4G USB receiver into your device's USB port.
- Keep the air mouse and the USB receiver within 2 inches of each other.
- Press and hold the Vol+ and Vol- buttons simultaneously for 3 seconds.
- The indicator light will flash 3 times quickly and then remain steadily on, indicating it has entered pairing mode.
- The indicator light will then flash 3 times quickly again and turn off automatically, signifying successful pairing.
- If the indicator light does not flash within 30 seconds but turns off automatically, pairing has failed. Please repeat the steps.
4. Operating Instructions

Figure 4: Multi-functionality of MRSVI W3
4.1. Basic Remote Functions
The front side of the remote features standard navigation and media control buttons:
- Power Button: Controls the power of your device (requires IR learning for most devices).
- Directional Pad (Up, Down, Left, Right): For menu navigation.
- OK Button: Confirms selections.
- Back Button: Returns to the previous screen.
- Home Button: Returns to the home screen.
- Menu Button: Accesses context menus.
- Volume Buttons (Vol+, Vol-): Adjusts audio volume.
4.2. Air Mouse Function
The MRSVI W3 features a built-in 6-axis gyroscope, allowing you to control the cursor by waving the remote in the air.

Figure 5: Air Mouse in Action
Adjusting Cursor Speed (CPI Adjustment)
If the cursor speed is too fast or too slow, you can adjust its sensitivity:
- The CPI (Counts Per Inch) has 4 gears, with the second gear being the default. A higher gear means faster cursor movement.
- Press and hold the OK button.
- While holding OK, press Vol+ to increase cursor speed or Vol- to decrease cursor speed.
- The indicator light will flash 3 times quickly, confirming the gear adjustment.
4.3. Voice Control Function
To use voice commands:
- Long press the Voice button (microphone icon).
- Speak your command clearly into the remote.
- Note: This function is only available after downloading and setting up Google Assistant and Google Voice Search on your device.
4.4. Keyboard Function
The reverse side of the remote features a full QWERTY keyboard layout, designed for intuitive typing.
- The keyboard distribution conforms to the operating habits of most users.
- Press the Fn key to switch between numbers and symbols.
4.5. Infrared (IR) Learning
The power button and other multimedia shortcut buttons can be programmed to control your TV or other IR-enabled devices. This allows the MRSVI W3 to replace multiple remotes.

Figure 6: Infrared Learning Setup
Example: Learning the Power Button
- Press and hold the [Air Mouse] button (mouse icon) and the Power button simultaneously on the MRSVI W3.
- The blue LED indicator will change from dim to bright, and the remote enters IR learning mode.
- Place the MRSVI W3 and your TV remote control head-to-head on a flat surface, approximately 1 inch apart.
- On the MRSVI W3, press the infrared function button you wish to learn (e.g., the Power button). The indicator light will flash.
- On your TV remote control, press the corresponding button that sends the infrared key value (e.g., the TV's power button). The LED light on the MRSVI W3 will change from flashing to steadily bright.
- Press the learned infrared function button on the MRSVI W3 again (e.g., the Power button).
- Press the [Air Mouse] button to exit learning mode and save the learned data.
Note: If no operation is performed for 30 seconds after entering learning mode, the remote will automatically exit learning mode.
5. Maintenance
5.1. Charging the Remote
The MRSVI W3 uses a built-in rechargeable lithium battery. When the battery is low, the indicator light will not light up when buttons are pressed.
- Connect the remote to a power source using a USB Type-C cable.
- Use a high-power charger with an output current of 5V2A or above.
- The charging time is typically more than 4 hours.
- Important: Low power chargers (less than 2A) or plugging into a computer/power bank may not adequately charge the device.
5.2. Cleaning
To clean the remote, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
5.3. Storage
Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding / Lost connection | USB receiver unplugged, pairing lost, low battery. | Ensure USB receiver is plugged in. Re-pair the remote (Section 3.2). Charge the remote (Section 5.1). |
| Voice control not working | Google Assistant/Voice Search not installed or configured. | Ensure Google Assistant and Voice Search are installed and set up on your device. |
| Cursor is jumpy or inaccurate | CPI setting is too high or too low. | Adjust the CPI settings (Section 4.2). |
| Some buttons not working (e.g., Power) | Button requires IR learning, device incompatibility. | Perform IR learning for the specific button (Section 4.5). Check device compatibility (Section 3.1). |
| Remote not charging | Incorrect charger, faulty cable, low power source. | Use a 5V2A or higher charger. Try a different USB Type-C cable. Avoid charging from computer USB ports or low-power power banks. |
| Remote not compatible with my TV | Brand TV not supported. | This remote primarily supports Android smart boxes and PCs. It does not support brand TVs like Apple, Samsung, Xiaomi, LG, Sony, Panasonic, Philips, Hisense, Haier. |
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | W3 |
| Standby Power Consumption | 25uA |
| Material | Plastic (ABS) |
| Remote Control Distance | 8-12m |
| Modulation Frequency | 2.4~2.4835GHz |
| Charging Port | USB Type-C |
| Working Temperature | -20℃ ~ 65℃ |
| Overall Dimensions | 152mm x 44mm x 9.8mm |
| Number of Keys | 58 |
| Battery Type | 250mAh / 3.7V Lithium Battery |
| Support System | Android / Windows / Mac OS PC / Linux |
| FCC ID | 2BL26-W3 |
| Wireless Communication | RF |
| Certifications | CE, RoHS |

Figure 7: Remote Controller Dimensions
8. User Tips
- Elegant and Lightweight: Users appreciate the sleek design and light feel of the remote, making it comfortable to hold.
- Type-C Charging: The modern USB Type-C charging port is a convenient feature.
- TCL TV Compatibility: Some users have reported perfect functionality with TCL TVs, suggesting good compatibility with certain Android TV models.
- Cursor Control: If the cursor feels shaky or imprecise, try adjusting the CPI settings (Section 4.2) to find your preferred sensitivity.
- Power Button Functionality: Note that the power button often requires IR learning to function as an on/off switch for your specific device. It may not act as a universal power button out-of-the-box.
- Battery Life: For optimal performance, ensure regular charging, especially if you notice the indicator light not responding.
9. Frequently Asked Questions (FAQ)
- Q: Is this remote compatible with my specific TV brand (e.g., LG, Philips, Hisense, Haier, Samsung, Xiaomi)?
- A: This remote is primarily designed for Android smart boxes and PCs. It is generally NOT compatible with specific brand TVs like LG, Philips, Hisense, Haier, Samsung, Xiaomi, Sony, Panasonic, or Apple devices. Please refer to the compatibility section (3.1).
- Q: Does the voice function work?
- A: Yes, the voice function works, but it requires Google Assistant and Google Voice Search to be installed and configured on your connected device.
- Q: Can I power off my TV box with this remote?
- A: The power button typically requires Infrared (IR) learning from your original TV box remote to function correctly for power on/off. Please refer to Section 4.5 for IR learning instructions.
- Q: Is there a Russian/Arabic/AZERTY keyboard layout?
- A: The standard layout is QWERTY. Specific language layouts like Russian, Arabic, or AZERTY are generally not available on this model.
- Q: Does it have Play/Pause buttons?
- A: Yes, the remote includes standard media control buttons, which typically include Play/Pause functionality.
- Q: Can it control multiple devices like an Amp and an Xbox?
- A: While it can learn IR commands for some devices, it's primarily designed to control one main device (like an Android box or PC) via its 2.4G receiver, with limited IR learning for basic TV functions. It's not designed as a universal remote for complex multi-device setups like an Amp and Xbox simultaneously.
- Q: Does it support Chromecast?
- A: Compatibility with Chromecast devices can be limited. It may work for basic navigation if the Chromecast supports standard USB HID input, but full functionality (like voice control) might not be guaranteed.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.