1. Package Contents
Please check the package for the following items:
- Disney AH-906 Wireless Bluetooth Headphones
- Charging case
- USB Type-C Adapter
- User Manual (this document)
2. Product Overview
The Disney AH-906 Wireless Bluetooth Headphones offer a high-fidelity audio experience with surround sound, designed for comfort and durability. Featuring popular anime cartoon designs, these over-ear headphones are suitable for various uses including video games, common listening, HiFi audio, and sports. They include active noise-cancellation and a built-in microphone for clear communication.
3. Setup and Charging
3.1 Initial Charge
Before first use, fully charge your headphones. Connect the provided USB Type-C adapter to the charging port on the headphones and plug the other end into a compatible USB power source. The charging indicator light will typically show red while charging and turn off or blue when fully charged.
3.2 Powering On/Off
- Power On: Press and hold the power button (or touch control area) for approximately 3-5 seconds until you hear a power-on prompt or see an indicator light flash.
- Power Off: Press and hold the power button (or touch control area) for approximately 3-5 seconds until you hear a power-off prompt or see an indicator light turn off.
3.3 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the power button (or touch control area) for about 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "AH-906" from the list of found devices.
- Once connected, the indicator light will typically flash blue slowly or turn solid blue, and you will hear a connection confirmation sound.
4. Operating Instructions
4.1 Basic Controls
The AH-906 headphones feature touch controls for various functions:
- Play/Pause: Single tap the touch control area on either ear cup.
- Next Track: Double tap the right ear cup.
- Previous Track: Double tap the left ear cup.
- Volume Up: Triple tap the right ear cup.
- Volume Down: Triple tap the left ear cup.
- Answer/End Call: Single tap the touch control area during an incoming call.
- Reject Call: Press and hold the touch control area for 2 seconds during an incoming call.
- Activate Voice Assistant: Press and hold the touch control area for 2 seconds (when not on a call).
4.2 Active Noise-Cancellation (ANC)
To activate or deactivate Active Noise-Cancellation, locate the dedicated ANC button or press and hold the designated touch control area (refer to specific model instructions if different from basic controls). An audible prompt or indicator light will confirm the ANC status.
4.3 Microphone Usage
The built-in microphone allows for hands-free calls and voice commands when connected to a compatible device. Ensure the headphones are properly positioned over your ears for optimal microphone performance.
5. Maintenance
5.1 Cleaning
- Wipe the headphones with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or aerosol sprays.
- Clean ear cushions gently with a slightly damp cloth if necessary, and allow them to air dry completely before use.
5.2 Storage
When not in use, store the headphones in their charging case or a protective pouch to prevent damage. Avoid exposing them to extreme temperatures, humidity, or direct sunlight.
5.3 Water Resistance
The headphones are waterproof, offering protection against splashes and sweat. However, they are not designed for submersion in water. Avoid using them while swimming or showering.
6. Troubleshooting
6.1 No Power
- Ensure the headphones are fully charged. Connect them to a power source using the USB Type-C cable.
- Try resetting the headphones by holding the power button for an extended period (e.g., 10-15 seconds).
6.2 Cannot Pair with Device
- Make sure the headphones are in pairing mode (indicator light flashing red and blue).
- Ensure Bluetooth is enabled on your device and it is within range (typically 10 meters).
- Forget/remove the headphones from your device's Bluetooth list and try pairing again.
- Restart both your device and the headphones.
6.3 No Sound or Poor Sound Quality
- Check the volume levels on both the headphones and your connected device.
- Ensure the headphones are properly connected to your device. Re-pair if necessary.
- Move closer to your device to avoid interference.
- Test with a different audio source or device.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Disney |
| Model | AH-906 |
| Material | Plastic |
| Style | Over the Ear |
| Communication | Wireless (Bluetooth) |
| Wireless Type | Bluetooth |
| Connectors | Type-C (for charging) |
| Vocalism Principle | Dynamic |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | No (Touch controls implied) |
| With Microphone | Yes |
| Codecs | AAC |
| Waterproof | Yes |
| Sensitivity | 100dB |
| Resistance | 30Ω |
| Impedance Range | up to 32 Ω |
| Driver Diameter | 13mm |
| Number Of Drivers | 2 |
| Total Harmonic Distortion | 2% |
| Support APP | No |
| Support Memory Card | No |
| Certification | CE |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 19 cm, Width: 13 cm, Height: 8 cm |
| Package Weight (approx.) | 0.195 kg |
8. User Tips
- For optimal sound quality, ensure the ear cups fit snugly over your ears to maximize noise isolation and bass response.
- Regularly clean the ear cushions to maintain hygiene and comfort.
- If experiencing intermittent connection issues, try to keep your connected device within a clear line of sight to the headphones.
- When not in use, store the headphones in their case to protect them from dust and physical damage.
9. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.
