1. Introduction
Thank you for choosing the Makerbase MKS PI-TS35 3.5 Inch Capacitive Screen. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new display screen. The MKS PI-TS35 is designed to work seamlessly with Makerbase MKS PI and MKS SKIPR boards, offering an intuitive capacitive touch interface for your 3D printer.
2. Setup and Installation
Follow these steps to correctly install your MKS PI-TS35 screen with your Makerbase board.
- Prepare the Board: Ensure your MKS PI or MKS SKIPR board is powered off before making any connections.
- Connect the Screen: Locate the dedicated display interface on your Makerbase board (e.g., MKS PI V1.1). Carefully align the MKS PI-TS35 screen connector with the corresponding port on the board and gently push to secure the connection.
- Power Connection: The MKS PI-TS35 screen typically draws power directly from the connected Makerbase board. Ensure your main board receives a stable DC12-24V power input.
- Optional HD Screen: If you plan to use an additional HD screen, connect it to the HD interface on your Makerbase board as shown in the diagram below.
3. Operating Instructions
The MKS PI-TS35 features a capacitive touch screen for intuitive interaction with your 3D printer's firmware interface.
- Power On: After connecting the screen and ensuring proper power supply to your Makerbase board, power on the system. The screen should initialize and display the user interface.
- Touch Interface: Use your finger to navigate through the menus and options displayed on the screen. The capacitive touch technology provides a responsive and smooth user experience.
- Basic Functions: Depending on your 3D printer's firmware, you will typically find options for:
- Monitoring temperatures (extruder, heated bed)
- Controlling printer movements (homing, axis control)
- Managing print jobs (start, pause, stop)
- Accessing printer settings and configurations
4. Maintenance
To ensure the longevity and optimal performance of your MKS PI-TS35 screen, follow these simple maintenance guidelines:
- Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen-specific cleaning solution to clean the display surface. Avoid using abrasive materials, alcohol, or harsh chemical cleaners, as these can damage the screen.
- Handling: Avoid applying excessive pressure to the screen. Do not use sharp objects to interact with the touch surface.
- Environment: Operate the screen within recommended temperature and humidity ranges. Protect it from direct sunlight and extreme temperatures.
5. Troubleshooting
If you encounter issues with your MKS PI-TS35 screen, try the following steps:
- Screen Not Displaying:
- Check all cable connections between the screen and the Makerbase board to ensure they are secure.
- Verify that the Makerbase board is receiving adequate power (DC12-24V).
- Ensure the firmware on your Makerbase board is correctly configured to support the MKS PI-TS35 screen.
- Touchscreen Unresponsive:
- Gently clean the screen surface to remove any dirt or debris that might interfere with touch detection.
- Restart the 3D printer system.
- Confirm that the screen's drivers are correctly installed and recognized by the firmware.
- Flickering Display:
- Check power supply stability.
- Ensure cables are not damaged or loose.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Makerbase |
| Item Type | Display Screen |
| Model | MKS PI-TS35 |
| Screen Size | 3.5 Inch |
| Screen Type | Capacitive Touch |
| Compatibility | MKS PI, MKS SKIPR Boards |
| Power Input | DC12-24V (via main board) |
| Origin | Mainland China |
| Package Length | 15 cm |
| Package Width | 15 cm |
| Package Height | 2 cm |
| Package Weight | 0.09 kg |
7. User Tips
- Check Package Contents: Upon receiving your MKS PI-TS35, carefully check the package to ensure all necessary cables and components are included. If any cables are missing, contact your seller for assistance.
- Firmware Compatibility: Always ensure your MKS PI or MKS SKIPR board is running the latest firmware version that supports the MKS PI-TS35 screen for optimal performance and feature access.
- Gentle Handling: The capacitive screen is sensitive. Handle it with care and avoid dropping or subjecting it to strong impacts.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official Makerbase support channels. Keep your purchase receipt or order details handy as proof of purchase.
