NEXPEAK A203

Contents

NEXPEAK A203 OBD2 On-board Computer User Manual

Model: A203

Introduction

The NEXPEAK A203 OBD mini car trip computer is a compact and powerful instrument designed to enhance your driving experience. It is particularly useful for vehicles that lack a tachometer, engine temperature gauge, or fuel consumption display functions.

The A203 provides real-time monitoring of critical vehicle parameters such as battery voltage, generator charging voltage, and offers essential warning functions like over-speed alarms and high engine temperature alerts. Additionally, it can read vehicle data streams, scan for engine fault codes, and clear them, significantly contributing to safer driving.

NEXPEAK A203 display with icons for various monitored parameters: Coolant temperature, Engine Speed, Battery Voltage, Digital Speed, Fuel Consumption, Brakes Test, Failure Diagnosis.
The NEXPEAK A203 displays various vehicle parameters including coolant temperature, engine speed, battery voltage, digital speed, fuel consumption, brake test results, and failure diagnosis.

Setup and Installation

Follow these steps to install your NEXPEAK A203 OBD2 On-board Computer:

  1. Locate OBD Port: Insert the product into the check port on your vehicle's OBD computer. The OBD interface is typically located under the dashboard, near the steering column (positions A or B in the diagram). A small number of vehicles may have it in other locations (C, D, or E).
  2. Connect to Host: Insert the other end of the product (the cable) into the data interface of the A203 host unit.
  3. Power On: After the product is connected and the car is started, wait for the communication linkage to establish between the A203 and your vehicle.
  4. Initialization: Once the linkage is successfully established, the host will emit a "drop" sound. The display screen will then show vehicle protocols and indicate that it is the first time the product is used to set up parameters.
Diagram showing common OBD interface locations in a car interior, labeled A, B, C, D, E.
Common locations for the OBD interface in a vehicle. Most are found in positions A and B.

Operating Instructions

The A203 offers a variety of functions to monitor and analyze your vehicle's performance:

1. Digital Display

  • Speed: Displays current vehicle speed.
  • Water Temperature: Shows engine coolant temperature.
  • Instantaneous Fuel Consumption: Provides real-time fuel usage.
  • Hour Fuel Consumption: Displays fuel consumed over a period.
  • Battery Voltage: Monitors the vehicle's battery voltage.
NEXPEAK A203 device showing speed (126 km/h), water temp (96°C), and voltage (13.9V).
Example of the A203's main display showing speed, water temperature, and voltage.

2. Performance Testing

  • Vehicle Acceleration Test: Measure your vehicle's acceleration performance.
  • Brake Test: Evaluate braking performance.
Four different display modes of the A203, showing speed, distance, RPM, and temperature warnings, along with 'Brake Test' and 'SpeedUp Test' results.
The A203 supports multiple display modes, including performance tests like Brake Test and SpeedUp Test.

3. OBD2 Engine Diagnostic Functions

  • Data Flow Display: View real-time data streams from your engine.
  • Fault Code Scanning: Identify and read engine fault codes.
  • Fault Code Clearance: Clear detected fault codes and turn off the check engine light.
Screen displaying various vehicle data streams (DTCS STATUS, SPEED, OXYGENSEN, etc.) and a prompt 'Enter the system loading...'.
The A203 can display detailed vehicle data streams for diagnostic purposes.

4. Early Warning Function

  • Water Temperature Warning: Alerts you if the engine temperature exceeds safe limits.
  • Over Speed Warning: Notifies you when a pre-set speed limit is exceeded.
  • Shifting Reminding: Provides reminders for optimal gear shifting.
  • Vehicle Fault Early Alarm: Alerts you to detected vehicle faults.

Maintenance

The NEXPEAK A203 is designed for durability and requires minimal maintenance. Keep the device clean and free from dust and moisture. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods. Ensure the OBD cable is securely connected to prevent intermittent readings.

Troubleshooting

Compatibility Issues

The A203 device operates based on OBD2 protocols. However, it does not support the J1850 (J1850 PWM, J1850 VPM) protocol. This can lead to compatibility issues with certain vehicles, especially older models or specific manufacturers.

Incompatible Vehicles:

  • European cars: Generally, vehicles manufactured before 2004 are not supported.
  • American cars: Generally, vehicles manufactured before 2004 are not supported.
  • French cars: Models from brands like DS, Peugeot, Citroen, and Renault are generally not supported.
  • Japanese cars: Generally, vehicles manufactured before 2008 are not supported.
  • Korean cars: Some KIA and Hyundai models manufactured before 2007 are not supported.
  • Chinese cars: Generally, vehicles manufactured before 2008 are not supported.
  • Special Cases: The device does not support oil and electricity mixing vehicles, Pick-up trucks, SUVs, or ORVs. A detailed list of specific unsupported models includes (but is not limited to): Vaz, Nissan Altima 2005, Toyota Prius, Nissan Note 2006, Nissan Murano 2007, Nissan Livina 2008, Nissan G11 2009, Nissan Frontier 2012, Nissan Sunny n17 2012, Nissan Rouge 2014, Honda CRV 2008/2016, Honda HRV 2016, Honda Jazz 2010, Honda V6 2010, Honda Element 2010, Toyota Avensis 2008, Toyota Porte 2009, Toyota Allion 2009, Toyota Prius 2012, Toyota Fortuner 2014, Toyota Hilux Vigo 2015, Toyota Altis 2016, BMW X5 Diesel 2013, Chrysler Silverado 2004, Chrysler Vivant model 2007, Chrysler Town and Country 2007, Lincoln Towncar 2003, Renault Clio 2 Phase, VOVOL XC60 2005, Perodua Alza/Viva/Myvi Lagibest 2012, KIA Morning 2008, SRT-4 Dodge Neon 2004, Dodge Durango 2004, Pontiac Bonneville 2005, Grand Marquis 2004, Hybrids Camry XLE 2016, GrandPrix (Pontiac grand prix) 2006, Rainier 2005, Jaguar XF 2011, Ford Taurus 2003, Ford Mustang 2004, Ford Galaxy 2005, Mitsubishi Outlander 2013-2016, Hyundai Accent II 2011, Hyundai i20 2012, Hyundai Sonata 2013, Hyundai Santa Fe 2013, Hyundai 30 sw 1.6crdi 2008, Chevrolet Silverado 2004-2005, Chevrolet Trailblazer 2006, Chevrolet Vivant 2007, Skoda Fabia 2009, Volvo XC60 2009, Mercedes Sprinter 2007, Iveco Dayly 2006, Seat Ibiza Mouth 1.4 gasoline 2010.
Table listing incompatible vehicles by region (European, American, France, Japanese, Korean, Chinese cars) and manufacture year.
General compatibility guidelines for the A203 device.
Detailed list of specific car models not supported by the OBD2 device.
Specific car models that are not supported by the A203.

Clearing Fault Codes

The A203 allows car owners to scan and clear regular vehicle fault codes at their discretion. This function can help reduce repair costs by addressing minor issues without needing a visit to a service center.

Specifications

Feature Specification
Operating Voltage 9-18V DC
Operating Current <80mA
Sleep Current <10mA
Operating Temperature -20~85°C
Product Volume 75mm x 55mm x 20mm
Software Update Yes
Certification CE
Item Type Code Readers & Scan Tools
Supported Protocols OBD2 Protocols (excluding J1850 PWM, J1850 VPM)
Digital Display Functions Speed, Water Temperature, Fuel Consumption
Adapted Car Year From 2000 to 2016 models (with exceptions)

Speed Meter Indication Error

The speed meter indicates speed and actual speed according to the formula: O ≤ Vn-VZ ≤ (V: + 10) + 4

  • Vn: Speed meter indicated speed in km/h
  • VZ: Actual speed in kilometers per hour (km/h)

The vehicle speed correction is based on 100km/h. The error in the low-speed state is due to the non-linear display of the original vehicle meter. For precise testing, connect to the OBD socket with a dedicated instrument at a service center.

Table of OBD protocols (SAE J1850 BUS+, Signal Ground, IS09141 K-LINE, CAN LOW, Chassis, CAN HIGH, SAE J1850 BUS-).
Supported OBD protocols.

User Tips

  • Check Compatibility: Before purchasing or installing, always verify if your vehicle's make, model, and year are compatible with the A203, especially if your car is older or from a manufacturer known for specific protocol implementations (e.g., Ford, Renault, Ssangyong, LADA, Chevrolet). If unsure, consult customer service.
  • Placement: The A203 is designed to be thin and light, allowing it to be placed directly on the dashboard for safer driving without obstructing your view.
  • Upgraded Model: The A203 is an upgraded version of the A202, offering a thinner body and faster performance.

Warranty and Support

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the manufacturer's customer support. Keep your purchase receipt for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.