AUSTAR AX-7S

Contents

AUSTAR AX-7S 2.4G 3CH Remote Control System User Manual

Model: AX-7S | Brand: AUSTAR

1. Introduction

The AUSTAR AX-7S is a 2.4GHz 3-channel remote control system designed for various RC vehicles, including 1/14, 1/16, 1/18, 1/24, 1/28, and 1/32 scale RC cars and boats. This system features a high-sensitivity transmitter and a compact 2-in-1 receiver with an integrated 20A Electronic Speed Controller (ESC). It offers stable performance, anti-jamming capabilities, and essential protective functions to ensure reliable operation of your RC model.

AUSTAR AX-7S Transmitter and 2-in-1 Receiver/ESC

Figure 1: AUSTAR AX-7S Transmitter and 2-in-1 Receiver/ESC unit.

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x AUSTAR AX-7S Remote Controller (Transmitter)
  • 1 x 2-in-1 Receiver and ESC Unit
  • 1 x Instruction Manual
AUSTAR AX-7S retail packaging and components

Figure 2: Retail packaging and included components of the AUSTAR AX-7S system.

3. Product Overview

Familiarize yourself with the components and controls of your AUSTAR AX-7S remote control system.

Detailed diagram of AUSTAR AX-7S Transmitter controls and Receiver/ESC wiring

Figure 3: Detailed diagram of Transmitter controls and Receiver/ESC connections.

3.1 Transmitter Controls

  1. Steering Positive/Reverse Switch
  2. Gas Pedal Positive/Reverse Switch (Throttle Reverse)
  3. Throttle Speed Gear 1-2-3
  4. Steering Wheel
  5. Throttle Trigger
  6. 3rd Channel (CH3) Button
  7. Rotation Steering Ratio (D/R)
  8. ON/OFF Switch
  9. TH.Trim Dial (Throttle Trim)
  10. ST.Trim Dial (Steering Trim)
  11. LED Indicator

3.2 Receiver/ESC Connections

  1. Battery Cathode (-)
  2. Battery Anode (+)
  3. Motor B Connection
  4. Motor A Connection
  5. ON/OFF Switch (for Receiver/ESC)
  6. LED Power Supply
  7. Servo Power Supply Anode (+)
  8. Servo Power Supply Cathode (-)
  9. Servo Signal
  10. Channel 1 (Steering Servo)
  11. Channel 3 (Auxiliary Function)
  12. Status Signal
  13. Aerial (Antenna)

4. Specifications

FeatureDetail
Item NameRC Transmitter with 2 in 1 Receiver ESC
Frequency2.4GHz
Channels3
ESC Rating20A
Control DistanceApproximately 100m
Mode TypeRC Car / RC Boat
Direction ControlForward / Backward / Turn Left / Turn Right
RF PowerLess than 20dbm
CH3 Button FunctionYes
Transmitter Power Supply4 x 1.5V AA batteries (Not included)
Display ModeLED Indicator
Transmitter Size21 x 13 x 7.5 cm
Receiver Size3.2 x 2.6 x 0.8 cm
Weight (System)134g
Compatibility1/14, 1/16, 1/18, 1/24, 1/28, 1/32 RC cars and boats
Dimensions of AUSTAR AX-7S Transmitter and Receiver/ESC

Figure 4: Physical dimensions of the transmitter and receiver/ESC unit.

5. Setup Guide

5.1 Transmitter Battery Installation

  1. Locate the battery compartment on the back of the transmitter.
  2. Slide open the battery cover.
  3. Insert four (4) 1.5V AA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.

5.2 Connecting the Receiver/ESC to your RC Vehicle

The 2-in-1 receiver and ESC unit simplifies wiring. Refer to Figure 3 for connection points.

  1. Motor Connection: Connect your RC vehicle's motor wires to the 'Motor A' (4) and 'Motor B' (3) terminals on the receiver/ESC. Ensure correct polarity if specified by your motor.
  2. Steering Servo Connection: Connect your steering servo to Channel 1 (10) on the receiver/ESC. Ensure the signal, positive, and negative wires are connected correctly (refer to your servo's manual).
  3. Auxiliary (CH3) Connection: If your RC vehicle has an auxiliary function (e.g., lights, winch), connect its servo or control unit to Channel 3 (11).
  4. Power Supply: Connect your RC vehicle's main battery to the 'Battery Anode' (2) and 'Battery Cathode' (1) terminals. The ESC is rated for 20A. Ensure your battery's voltage and current capabilities are compatible with your motor and ESC.
  5. Antenna: Ensure the aerial (13) is positioned correctly for optimal signal reception.
  6. ON/OFF Switch: Connect the provided ON/OFF switch (5) to the receiver/ESC unit and mount it in an accessible location on your vehicle.

5.3 Binding Procedure

The transmitter and receiver are typically pre-bound from the factory. If re-binding is necessary:

  1. Ensure both the transmitter and receiver are powered off.
  2. Turn on the transmitter.
  3. Press and hold the bind button (if present, usually a small button on the receiver) while turning on the receiver/ESC unit.
  4. The LED indicator on the receiver should change, indicating a successful bind.
  5. Release the bind button. Turn off both units, then power them on normally to confirm the bind.

6. Operating Instructions

6.1 Power On/Off

  1. Turn on the transmitter using the ON/OFF switch (8). The LED indicator (11) should light up.
  2. Turn on the receiver/ESC unit using its ON/OFF switch (5) on your RC vehicle.
  3. To power off, reverse the order: turn off the receiver/ESC first, then the transmitter.

6.2 Basic Control

  • Steering: Use the Steering Wheel (4) to control left and right turns.
  • Throttle: Pull the Throttle Trigger (5) for forward movement and push it for reverse/brake.

6.3 Adjustments and Trims

  • Steering Trim (ST.Trim Dial 10): Adjusts the neutral position of the steering servo. If your vehicle pulls to one side when the steering wheel is centered, use this dial to correct it.
  • Throttle Trim (TH.Trim Dial 9): Adjusts the neutral position of the throttle. If your vehicle creeps forward or backward when the throttle trigger is released, use this dial to correct it.
  • Steering Reverse (1): Reverses the direction of the steering servo. Use if steering left on the transmitter makes the vehicle turn right.
  • Throttle Reverse (2): Reverses the direction of the throttle. Use if pulling the trigger makes the vehicle go backward.
  • Throttle Speed Gear (3): Allows selection of different throttle response curves or speed limits (1-2-3).
  • Rotation Steering Ratio (D/R 7): Adjusts the maximum steering angle, allowing you to fine-tune the vehicle's responsiveness.
  • CH3 Button (6): Activates the auxiliary function connected to Channel 3.

6.4 Control Distance

The system offers a control distance of approximately 100 meters. Always operate your RC vehicle within this range and maintain a clear line of sight.

7. Safety Features

The AUSTAR AX-7S system incorporates several protective features:

  • Overheating Protection: The ESC will stop output if its temperature exceeds 90 degrees Celsius to prevent damage. Operation will resume once the temperature drops.
  • Locked-Rotor Protection: If the motor is overloaded or jammed, the electrical output will stop after 2-3 seconds. The system will enter a protective mode. To reset, return the throttle control to the center position.
AUSTAR AX-7S highlighting overheating and locked-rotor protection

Figure 5: Key protective features of the AUSTAR AX-7S system.

8. Maintenance

  • Battery Care: Remove AA batteries from the transmitter when not in use for extended periods to prevent leakage.
  • Cleaning: Use a soft, dry cloth to clean the transmitter and receiver/ESC. Avoid using solvents or harsh chemicals.
  • Storage: Store the remote control system in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Antenna: Do not cut or modify the receiver's antenna wire, as this can significantly reduce range and performance.

9. Troubleshooting

  • No Power to Transmitter: Check if AA batteries are installed correctly and are not depleted. Replace if necessary.
  • No Control/Loss of Signal: Ensure both transmitter and receiver are powered on. Check battery levels in both units. Verify that the binding procedure was successful. Ensure you are within the 100m control range.
  • Motor Not Responding: Check motor connections to the ESC. Verify the main battery is charged and connected correctly. If locked-rotor protection activated, return throttle to center.
  • Steering/Throttle Not Centered: Use the ST.Trim (10) and TH.Trim (9) dials on the transmitter to fine-tune the neutral positions.
  • Incorrect Steering/Throttle Direction: Use the Steering Reverse (1) or Throttle Reverse (2) switches on the transmitter to correct the direction.

10. User Tips

  • Transmitter Power: The transmitter requires four 1.5V AA batteries, providing a total of 6V. Always use fresh batteries for optimal performance.
  • Receiver/ESC Power: The 2-in-1 receiver/ESC unit is powered by your RC vehicle's main battery. Ensure your vehicle's battery voltage is compatible with the ESC and motor.
  • Initial Setup: Before first use, always perform a range check and test all controls (steering, throttle, CH3) with the vehicle safely elevated or on a stand to prevent unexpected movement.
  • Environmental Factors: While the system has anti-jamming capabilities, avoid operating in areas with strong electromagnetic interference or other 2.4GHz devices to ensure the best control experience.

11. Warranty and Support

For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries. This manual provides general operational guidelines; specific issues may require professional assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.