1. Introduction
The PowMr POW-SunSmart L3 series solar energy storage inverter is an advanced all-in-one solution integrating solar energy storage, utility charging, and AC sine wave output. Designed with DSP control, it offers high response speed, reliability, and industrial-standard performance through sophisticated control algorithms. This manual provides essential information for the safe and efficient operation of your POW-SunSmart 12KL3 inverter.

2. Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- POW-SunSmart 12KL3 Inverter Unit
- User Manual
- Set of Installation Accessories (e.g., mounting hardware, connectors)
- Parallel Communication Cable
- Inspection Report
3. Specifications
General Specifications
- Brand Name: PowMr
- Model Number: POW-SunSmart Series (12KL3)
- Output Power: 1 - 200 KW
- Weight: 29.5 Kg
- Output Frequency: 50/60Hz
- Is Smart Device: Yes
- Origin: Mainland China
- Certification: CE
- High-concerned chemical: None
- is_customized: Yes
Detailed Product Specification (POW-SunSmart 12KL3)
| Category | Parameter | Value (12KL3) |
|---|---|---|
| INVERTER OUTPUT | ||
| Rated Output Power | 12000W | |
| Max. Peak Power | 24000W | |
| Rated Output Voltage | 230/400Vac (three-phase) | |
| Capacity of Motor Load | 6HP | |
| Rated Frequency | 50/60Hz | |
| Output Waveform | pure sine wave | |
| Switching Time | 10ms(typical) | |
| Overload Protection | After triggering the overload protection, the inverter will resume output after 3 minutes. 5 consecutive overloads will shut down the output until the inverter is restarted.(102%<load<110%) ±10%: error, output shut down after 5 minutes.(110%<load<125%) ±10%: error, output shut down after 10s.(>125% load ±10%): error, output shut down after 5s. | |
| BATTERY | ||
| Battery Types | Li-ion / Lead-Acid / User Defined | |
| Rated Battery Voltage | 48Vdc | |
| Voltage Range | 40-60Vdc | |
| Max. PV Charging Current | 260A | |
| Max. Utility / Generator Charging Current | 120A | |
| PV INPUT | ||
| No. of MPPT | 2 | |
| Max. Input Power | 9000W/9000W | |
| Max. Input Current | 22/22A | |
| Max. Open-circuit Voltage | 800Vdc/800Vdc | |
| MPPT Operating Voltage Range | 200-650Vdc/200-650Vdc | |
| UTILITY / GENERATOR INPUT | ||
| Input Voltage Range | phase voltage 170~280V, line voltage 305~485V | |
| Input Frequency Range | 50Hz / 60Hz | |
| Bypass Overload Phase Current | 35A | |
| EFFICIENCY | ||
| MPPT Tracking Efficiency | 99.9% | |
| Max. Battery Inverter Efficiency | ≥92% | |
| European Efficiency | 97.5% | |
| COMMUNICATION | ||
| Internal Interface | RS485 / CAN / USB / Dry contact | |
| External Module (optional) | Wi-Fi / GPRS | |
| GENERAL | ||
| Protection Degree | IP20, indoor only | |
| Ambient Temp | -10~55℃, >45℃ derated | |
| Noise | <60dB | |
| Cooling Method | Fan cooling | |
| CERTIFICATION | ||
| Safety | IEC62109-1, IEC62109-2 | |
| EMC | EN61000-6-1, EN61000-6-3, FCC 15 class B | |
| RoHS | Yes | |
Physical Dimensions
- Length: 57 cm
- Width: 25 cm
- Height: 79 cm
- Weight: 30.0 Kg
4. Setup and Installation
The PowMr POW-SunSmart 12KL3 inverter is designed for indoor use only (IP20 protection degree). Ensure the installation location is well-ventilated and within the specified ambient temperature range of -10°C to 55°C (derated above 45°C).
4.1 Parallel Operation
This inverter supports parallel operation of up to 6 units, allowing for a total output power expansion limit of 72KW. Use the provided parallel communication cable for multi-unit setups.

4.2 Battery Connection
The inverter is compatible with 48Vdc Li-ion and Lead-Acid batteries. It also supports battery-less operation, where the inverter can power loads directly from the PV array or AC grid. The maximum PV charging current is 260A, and the maximum utility/generator charging current is 120A.
For Li-ion batteries, the inverter features a dual activation function: either mains power or photovoltaic power supply access can trigger the activation of a dormant Li-ion battery.

4.3 PV Input Connection
The inverter features dual MPPT inputs, each capable of handling up to 22A input current and an open-circuit voltage of up to 800Vdc. The MPPT operating voltage range is 200-650Vdc.

4.4 AC Output Connection
The inverter provides a three-phase pure sine wave output at 230/400Vac. The phase voltage can be adjusted within the range of 200, 208, 220, 230, 240Vac. The maximum output current is 19.2A.

5. Operating Modes
The PowMr POW-SunSmart 12KL3 offers flexible operating modes to optimize energy usage:
5.1 Charging Modes (4 Available)
- Solar Only: Charges batteries exclusively from solar power.
- Mains Priority: Prioritizes utility power for charging, using solar as a secondary source.
- Solar Priority: Prioritizes solar power for charging, using utility as a secondary source.
- Mixed Mains and PV Charging: Utilizes both utility and PV power for charging.
5.2 Output Modes (2 Available)
- Utility Bypass: Loads are powered directly by the utility grid.
- Inverter Output: Loads are powered by the inverter, drawing from solar or battery.
The inverter also features an Uninterrupted Power Supply (UPS) function, ensuring continuous power during grid outages.

5.3 Energy-Saving Mode and Time-Slot Function
An energy-saving mode reduces no-load energy losses. The time-slot charging and discharging function allows users to leverage peak and valley electricity tariffs, storing excess solar energy during the day for use during evening peak hours, thereby reducing electricity costs. If the battery discharge time is set to zero, the inverter can function as a UPS power supply.

6. LCD Display and Controls
The inverter features an LCD HD display screen with a dynamic flow diagram design, making it easy to understand system data and operation status. The control buttons allow for navigation and setting adjustments.

6.1 Control Buttons
- Enter/Exit Settings: Used to access and exit the settings menu.
- Option Increase: Navigates up or increases a value in settings.
- Option Decrease: Navigates down or decreases a value in settings.
- OK/Enter Options: Confirms selection or enters a submenu.
6.2 Display Indicators
- Battery Capacity: Shows the current charge level of the battery.
- Load Percentage: Indicates the current load on the inverter.
- Utility: Shows status of the grid connection.
- Generator: Shows status of generator connection.
- Solar Power: Displays current solar power generation.
- Home Appliances: Indicates power supply to home appliances.
- Normal State: System is operating normally.
- Alarm/Fault State: Indicates an alarm or fault condition.
7. Protection Features
The PowMr POW-SunSmart 12KL3 inverter incorporates comprehensive 360° protection mechanisms to ensure safe and reliable operation:
- Short Circuit Protection
- Over Current Protection
- Over Voltage Protection
- Under Voltage Protection
- Over-Load Protection
- Backfill Protection
- Over-Temperature Protection
- Over Charge Protection

8. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter. Always disconnect all power sources before performing any maintenance.
- Cleaning: Keep the inverter's ventilation openings clear of dust and debris. Use a soft, dry cloth for cleaning the exterior. Do not use liquid cleaners.
- Connections: Periodically check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
- Environment: Ensure the operating environment remains within the specified temperature and humidity ranges. The inverter is IP20 rated, meaning it is for indoor use only and not protected against water.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your inverter has the latest features and bug fixes.
9. Troubleshooting
This section covers common issues and basic troubleshooting steps. For complex problems, contact technical support.
9.1 Common Issues
- No Power Output:
- Check AC input breaker (ON/OFF switch on the side of the unit).
- Verify battery connections and voltage.
- Ensure PV input is sufficient and connections are secure.
- Check for any fault codes on the LCD display.
- Overload Error:
- Reduce the connected load.
- The inverter will attempt to restart after a delay (see Overload Protection in Specifications).
- Battery Not Charging:
- Check PV input voltage and current.
- Verify utility/generator input if using those charging modes.
- Ensure battery type settings are correct on the inverter.
- Communication Issues (CAN, USB, RS485):
- Check cable connections.
- Ensure external modules (Wi-Fi/GPRS) are correctly installed and configured.
Refer to the LCD display for specific error codes and consult the full user manual (if available as a PDF) for detailed troubleshooting guides.
10. User Tips
- Battery Protocol: When connecting external battery storage systems, ensure compatibility with the inverter's battery protocols. For example, some users have inquired about compatibility with Pylontech 51300/48300 low voltage 51V batteries. Always verify the battery's communication protocol (e.g., CAN, RS485) and voltage requirements with the inverter's specifications.
- Optimal Performance: To maximize solar energy utilization, consider configuring the inverter to "Solar Priority" charging mode. Utilize the time-slot charging/discharging function to take advantage of off-peak electricity rates.
- Monitoring: Regularly check the LCD display for system status and any alerts. If an external Wi-Fi/GPRS module is used, leverage remote monitoring capabilities for convenience.
11. Warranty and Support
For warranty information, technical support, or service requests, please refer to the warranty card included in your package or contact PowMr customer service directly. Ensure you have your product model number (POW-SunSmart 12KL3) and serial number ready when contacting support.
The product is certified with CE and RoHS, ensuring compliance with relevant safety and environmental standards.