ISDT PD60

Contents

ISDT URUAV PD60 60W 6A Type-C Input Battery Balance FPV Charger

Instruction Manual

1. Introduction

The ISDT URUAV PD60 is a compact yet powerful 60W 6A Type-C input battery balance charger designed for FPV drones, RC cars, and other multirotor applications. It supports various battery types including LiPo, LiHV, LiFe (1-4S), and NiMH/Cd (1-12S). With its intuitive interface and robust features, it provides efficient and safe charging for your batteries.

ISDT PD60 Battery Charger, showing both white and black color options.
The ISDT PD60 charger is available in white and black.

2. Safety Information

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Always use the charger in a well-ventilated area.
  • Do not charge batteries unattended.
  • Ensure correct battery type and cell count settings before charging.
  • Keep the charger away from moisture, heat, and direct sunlight.
  • Do not attempt to charge damaged or swollen batteries.

3. Package Contents

  • 1 x ISDT PD60 Battery Charger

4. Product Overview

The ISDT PD60 charger features a compact design with an intuitive control panel and essential ports for charging various battery types.

ISDT PD60 Battery Charger with dimensions: 85mm length, 56mm width, 21mm height.
The compact dimensions of the PD60 charger are 85mm x 56mm x 21mm.
Close-up of ISDT PD60 control panel showing battery type (LiPo, LiHV, LiFe, NiMH) and charging current (1A, 2A, 3A, 6A) selection LEDs, along with charging progress indicators.
The control panel features LED indicators for battery type and charging current, as well as a progress bar.
Bottom view of ISDT PD60 charger showing 2S-4S balance port and XT60 output port (1-17.4V).
The charger includes a 2S-4S balance port and an XT60 output port for connecting batteries.
Side view of ISDT PD60 charger highlighting ventilation grilles for efficient heat dissipation.
Integrated ventilation grilles on the side ensure effective heat dissipation.

5. Specifications

Feature Specification
Model No. PD60
Input Voltage DC 5V-20V
Output Voltage DC 1.0V-20V
Max Input Current 3A
Charging Current 1A/2A/3A/6A
Max Charging Power 60W
Balance Current 0.5A/Cell Max
Supported Quick-Charge PD2.0/3.0, QC 2.0/3.0 (Not supported 5V/1A power supply input)
Supported Battery Types & Cell Count LiFe/LiHV, LiPo 1-4S; NiMH/Cd 1-12S
Abnormal Voltage Alarm Support
Incorrect Cell Count Setting Alarm Support
Working Temperature 0-40°C
Storage Temperature -20-60°C
Dimension 56x85x21mm
Weight 87g

6. Setup

  1. Power Connection: Connect a compatible USB-C power adapter (supporting PD2.0/3.0 or QC2.0/3.0, 5-20V input) to the USB-C port on the charger. Ensure the power supply is sufficient for the desired charging power (up to 60W).
  2. ISDT PD60 charger connected via USB-C input cable, demonstrating its power input method.
    The charger is powered via a universal USB-C input.
  3. Battery Connection: Connect your battery's balance lead to the 2S-4S balance port and the main discharge lead to the XT60 output port on the charger. Ensure correct polarity.

7. Operating Instructions

The PD60 charger features two streamlined operation buttons and clear LED indicators for ease of use.

Diagram showing ISDT PD60 LED indicators for battery type (LiPo, LiHV, LiFe, NiMH), charging current (1A, 2A, 3A, 6A), charging progress (20-100%), and button functions (long press for battery type, short press for current, play/pause for start/stop).
Detailed view of the LED indicators and button controls for selecting battery type, charging current, and managing the charging process.
  1. Select Battery Type: Long press the left button (labeled with a 'C' or similar icon) to cycle through battery types: LiPo, LiHV, LiFe, NiMH. The corresponding LED will illuminate.
  2. Select Charging Current: Short press the left button to cycle through available charging currents: 1A, 2A, 3A, 6A. The corresponding LED will illuminate.
  3. Start/Stop Charging: Press the right button (play/pause icon) to start the charging process. Press it again to stop charging.
  4. Charging Progress: The LED bar on the right side indicates the charging progress (20%, 40%, 60%, 80%, 100%).
  5. Status Indicators:
    • Lightning bolt icon: Charging in progress.
    • Checkmark icon: Charging complete.
    • Exclamation mark icon: Error detected.

8. Firmware Upgrade

The ISDT PD60 supports firmware upgrades via its USB-C interface to ensure you always have the latest features and performance improvements.

  1. Download the latest firmware from the official ISDT website.
  2. Connect the PD60 charger to your computer using a USB-C cable.
  3. Follow the instructions provided with the firmware update tool to complete the upgrade process.
ISDT PD60 charger connected to a laptop via USB-C for firmware upgrade, showing the upgrade interface on screen.
The USB-C interface allows for convenient firmware upgrades to maintain optimal performance.

9. Maintenance

  • Keep the charger clean and free from dust and debris.
  • Do not expose the charger to extreme temperatures or humidity.
  • Regularly check cables and connectors for any signs of wear or damage.
  • Store the charger in a cool, dry place when not in use.

10. Troubleshooting

  • Charger not powering on: Ensure the USB-C power input is connected correctly and the power source is active and compatible (5-20V, PD/QC supported).
  • Error indicator illuminated: Check battery connections for correct polarity and ensure the battery type and cell count settings match the connected battery. Refer to the manual for specific error codes if available in future firmware.
  • Slow charging: Verify that your USB-C power adapter can deliver sufficient power (e.g., a 60W PD adapter for maximum charging speed).
  • Abnormal Voltage Alarm: This indicates a voltage outside the safe operating range for the selected battery type. Disconnect the battery immediately and check its condition.
  • Incorrect Cell Count Setting Alarm: This alarm triggers if the charger detects a cell count that does not match your manual selection. Double-check your battery's cell count and adjust the charger setting accordingly.

11. User Tips

  • For optimal performance, always use a high-quality USB-C power adapter that supports Power Delivery (PD) or Quick Charge (QC) protocols.
  • When charging LiPo batteries, it's good practice to balance charge them regularly to maintain cell health and longevity.
  • Keep the charger's ventilation grilles clear to ensure efficient heat dissipation during operation.

12. Warranty & Support

This product comes with a manufacturer's limited warranty for defective items. Please refer to your purchase documentation for specific warranty terms and duration. For technical support or warranty claims, please contact the retailer or manufacturer directly.

Ensure you retain your proof of purchase for any warranty-related inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.