1. Introduction
Thank you for choosing the AOHEWEI AO50P LED Warning Light. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new warning light. Designed for high visibility and durability, this light is suitable for a wide range of applications including school buses, tractors, excavators, and other commercial or industrial vehicles.

2. Specifications
The AOHEWEI AO50P LED Warning Light is engineered for robust performance and reliability. Below are its key technical specifications:
| Feature | Specification |
|---|---|
| Model Name | AO50P |
| Brand Name | AOHEWEI |
| Voltage | 12 V / 24 V |
| LED Quantity | 20 pieces 1W super bright LEDs |
| Item Type | STROBE LIGHT |
| Operating Modes | 8 modes (4 flashing patterns, 3 rotating patterns, 1 cruise mode) |
| Waterproof Rating | IP67 (Dust & Waterproof) |
| Item Weight | 500g |
| Dimensions (Diameter x Total Height) | 9.5 cm x 19.5 cm |
| Certifications | CISPR25, SAE J845, ECE R65 TA1, R10 |
| Origin | Mainland China |

3. Product Structure
The AOHEWEI AO50P LED Warning Light is composed of several key components designed for optimal performance and durability:
- PC Housing: Made of high transmittance plastic material, providing a crystal clear lens for maximum brightness and scratch resistance.
- Total 20 LEDs: Features 20 high-intensity LEDs offering 360-degree full angle visibility.
- ABS Plastic Base: Designed for effective heat dissipation, ensuring stable and steady operation.
- Rotating Flexible DIN Pole Mount: Allows for 360-degree rotation coverage and easy installation with the included screw set.
- Connecting Fixed Base: Provides a secure connection for mounting.

4. Installation
The AOHEWEI AO50P LED Warning Light is designed for straightforward installation. Please follow these steps carefully:
- Choose Mounting Location: Select a suitable location on your vehicle (e.g., roof) that provides clear visibility and is structurally sound to support the light. The flexible DIN pole mount allows for versatile positioning.
- Secure the Fixed Base: Use the provided screw set to securely attach the connecting fixed base to the chosen mounting surface. Ensure the base is firmly fastened to prevent movement during vehicle operation.
- Attach the Warning Light: Insert the rotating flexible DIN pole mount of the warning light into the fixed base. The design allows for 360-degree rotation, which can be adjusted after installation for optimal coverage.
- Wiring: Connect the power cables of the warning light to your vehicle's 12V or 24V power supply. Ensure correct polarity (positive to positive, negative to negative) and use appropriate wiring connectors and fuses for safety. Consult a professional if you are unsure about electrical connections.
- Test Functionality: After installation and wiring, turn on your vehicle's power and test all operating modes of the warning light to ensure it functions correctly.
The light is suitable for direct replacement on the roof of a vehicle or for alerting dangerous places in industrial and mineral companies.
5. Operation
The AOHEWEI AO50P LED Warning Light features 8 distinct operating modes to suit various warning requirements. These modes include 4 flashing patterns, 3 rotating patterns, and 1 cruise mode.
- Mode Selection: The specific method for cycling through modes (e.g., a dedicated switch, power cycle) will depend on your vehicle's wiring and any external control units. Refer to your vehicle's accessory wiring instructions if applicable.
- Flash Modes (4 patterns): Provide intermittent light signals for immediate attention.
- Rotation Modes (3 patterns): Simulate a rotating beacon effect for continuous visibility.
- Cruise Mode (1 pattern): Offers a steady or gently pulsing light, often used for general presence or less urgent warnings.
Observe the video below for a demonstration of the various light patterns:
6. Maintenance
To ensure the longevity and optimal performance of your AOHEWEI AO50P LED Warning Light, follow these maintenance guidelines:
- Regular Cleaning: Periodically clean the PC housing with a soft cloth and mild soap solution to remove dirt, dust, and debris that may obstruct light output. Avoid abrasive cleaners or solvents.
- Inspect Wiring: Regularly check all electrical connections for corrosion, fraying, or loose contacts. Ensure all wiring is securely insulated and protected from environmental elements.
- Check Mounting: Verify that the fixed base and the DIN pole mount are securely attached to the vehicle. Tighten any loose screws or bolts as necessary.
- Environmental Protection: Despite its IP67 rating, extreme conditions can still impact performance. Ensure the light is not subjected to prolonged submersion or direct high-pressure water jets.
7. Troubleshooting
If you encounter issues with your AOHEWEI AO50P LED Warning Light, refer to the following common problems and solutions:
- Light Does Not Turn On:
- Check power supply: Ensure the vehicle's power is on and the light is receiving adequate voltage (12V or 24V).
- Inspect wiring: Verify all electrical connections are secure and free from damage or corrosion. Check for blown fuses in the circuit.
- Confirm polarity: Ensure positive and negative wires are connected correctly.
- Light Flashes Intermittently or Incorrectly:
- Loose connections: Check all wiring connections for looseness.
- Voltage fluctuations: Ensure a stable power supply from the vehicle.
- Internal fault: If all external checks pass, there might be an internal component issue. Contact customer support.
- Reduced Brightness:
- Dirty lens: Clean the PC housing as described in the maintenance section.
- Aging LEDs: While LEDs have a long lifespan, extreme conditions can affect them over time.
If the problem persists after attempting these solutions, please contact AOHEWEI customer support for further assistance.
8. User Tips
- For optimal visibility, especially in adverse weather conditions, ensure the light is mounted as high as safely possible on the vehicle.
- Regularly check local regulations regarding the use of warning lights on public roads or specific work sites to ensure compliance.
- Consider the specific application when selecting an operating mode. Flash modes are generally for urgent warnings, while rotation modes provide continuous presence.
9. Safety and Certifications
The AOHEWEI AO50P LED Warning Light is designed and manufactured to meet stringent safety and quality standards. It has successfully passed the following certifications:
- CISPR25: Ensures electromagnetic compatibility, minimizing interference with other electronic devices.
- SAE J845: Standard for optical warning devices for authorized emergency, maintenance, and service vehicles.
- ECE R65 TA1: European standard for special warning lights, ensuring effective light output and visibility.
- R10 Certification: Confirms electromagnetic compatibility (EMC) for automotive products.
These certifications ensure the safety of both the user and the surrounding environment, providing reliable performance in critical situations.


10. Warranty and Support
AOHEWEI is committed to providing high-quality products and excellent customer service. Your AO50P LED Warning Light comes with:
- Free Returns: Enjoy free returns within 90 days of purchase.
- Fast Delivery Guarantee: In case of delayed delivery, a coupon code may be provided. Refunds are available if the package is lost or items are damaged during transit, or if no delivery occurs within 30 days.
- Customer Service: If you have any questions about the product, its parameters, or require technical assistance, our customer service team is available 24 hours a day to help you.
For support, please refer to the contact information provided by your retailer or on the official AOHEWEI website.
