QIDEWIN T1 LED Headlight Conversion Kit User Manual

1. Product Overview

The QIDEWIN T1 LED Headlight Conversion Kit provides superior illumination for your vehicle. Featuring high-quality LED chips, advanced cooling, and a robust waterproof design, these bulbs offer enhanced visibility and a long operational life.

Key Features:

• Super Bright: 7000lm/set (3500lm/bulb)
• Fast Start: Instant illumination
• Efficient Cooling System: Aluminum thermal dissipation with cooling fan
• Plug & Play: Compact all-in-one design for easy installation
• Waterproof: IP67 rating
• Wide Voltage Range: DC 8-48V
• Color Temperature: 6000K White

Figure 1: QIDEWIN T1 LED Headlight Conversion Kit

Figure 2: Close-up of QIDEWIN T1 LED Headlight bulbs

Figure 3: Detailed view of LED headlight components

2. Safety Information

WARNING:

• Only professional personnel are allowed to install and debug. It is strictly prohibited to modify internal circuits or light sources without authorization.
• For outdoor use, it is necessary to confirm that the seal is intact to avoid damage caused by water accumulation.
• Stay away from sources of fire and corrosive environments.
• Keep the device and its cord out of reach of children under 3 years old.
• Always disconnect the negative electrode of the vehicle battery before installation.

3. Specifications

Figure 4: Dimensions for various socket types

Figure 5: Product size diagram

4. Installation

This product is designed for universal car brands and models, including Toyota, Honda, Volkswagen, BMW, Mercedes Benz, Audi, etc. Ensure compatibility with your specific vehicle's model year.

Installation Steps:

1. Disconnect the vehicle power by removing the negative electrode of the vehicle battery.
2. Remove the original light bulb from the lamp socket.
3. Insert the decoding LED headlight into the lamp socket.
4. Fix the LED headlight by rotating it clockwise until secure.
5. Connect the power plug firmly and without looseness.
6. Power on the vehicle and test the lights. Adjust the light pattern to the appropriate angle for optimal beam focus.

Caution:

• Avoid touching the LED chip with your bare hands during installation to prevent fingerprints from affecting brightness and lifespan.
• Connect the plug model directly to the corresponding model of your own car.

Figure 6: T1 LED Headlight installed in a car

5. Operation

The T1 LED Headlights support both low beam and high beam functions, depending on your vehicle's wiring and the specific bulb type (e.g., H4/9003/HB2 Hi/Lo).

Light Modes:

• Low Beam: Provides a focused light pattern for general driving, minimizing glare for oncoming traffic.
• High Beam: Offers maximum illumination for increased visibility on dark roads.

Figure 7: Real shot effect of low beam and high beam

Figure 8: Examples of T1 LED Headlights in use on various vehicles

Figure 9: Performance in various weather conditions

6. Maintenance

Cleaning:

Turn off the device before cleaning. Use a soft, lint-free cloth to gently wipe the surface of the LED bulbs and cooling components. Do not use harsh chemicals or abrasive materials.

Storage:

Store the LED headlights in a dry place at room temperature (15°C - 35°C) when not in use or during replacement.

Figure 10: IP67 Waterproof and Moisture-Proof design

Figure 11: Heat dissipation features

7. Troubleshooting

If you encounter any issues with your QIDEWIN T1 LED Headlights, please consider the following:

• No Light/Flickering: Double-check all connections to ensure they are firm and correctly seated. Verify that the vehicle's power is properly connected and the fuse is intact.
• Incorrect Light Pattern: Ensure the bulb is correctly oriented and fully seated in the lamp socket. Adjust the angle if necessary during the power-on test.
• Error Messages on Dashboard: These headlights feature Canbus functionality, designed to prevent error messages. However, in some sensitive vehicles, an additional Canbus decoder might be required.
• Water Accumulation: Although rated IP67, ensure the headlight assembly's seals are intact for outdoor use to prevent water damage.

If problems persist, please contact QIDEWIN customer support for assistance.

8. User Tips

• Socket Type Confirmation: Always double-check your vehicle's existing headlight bulb type (e.g., H11, H4) before purchasing to ensure compatibility. The T1 LED Headlights are available in various socket types.
• Quantity: The product is typically sold as a pair (2PCS) for a complete headlight upgrade, though single units (1PC) may also be available depending on the specific product option selected. Confirm the quantity when ordering.
• Optimal Beam Adjustment: After installation, perform a power-on test in a dark environment to fine-tune the light pattern. Proper adjustment ensures maximum visibility without blinding other drivers.
• Canbus Compatibility: While these bulbs have Canbus functionality, some vehicles, especially newer European models, might still require an additional external Canbus decoder to prevent dashboard error warnings.

9. Warranty & Support

The QIDEWIN T1 LED Headlight Conversion Kit comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact the manufacturer directly.

Manufacturer Information:

Manufacturer: Guangzhou QIDEWIN Electronic Technology Co., Ltd
Address: China Guangdong Province Guangzhou Baiyun District Yongping Subdistrict Guan Ting Xi Jie No:32

EU Authorized Representative:

Representative: SUCCESS COURIER SL
Address: CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

Please refer to the official QIDEWIN website or your purchase platform for the most up-to-date contact information.

10. Disposal & Recycling

This symbol indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.