1. Introduction
This manual provides essential information for the safe and efficient use of your CHWEIDA RT-I10Y-N5100 Rugged Tablet. Please read it thoroughly before operating the device and keep it for future reference.

Figure 1: CHWEIDA RT-I10Y-N5100 Rugged Tablet Overview
2. Package Contents
Verify that all items are present in your package:
- CHWEIDA RT-I10Y-N5100 Rugged Tablet
- Power Adapter
- 4-points Strap
- User Guide

Figure 2: Basic Packing List
Optional Accessories (may be purchased separately):
- Backplate bracket
- Clip bracket
- Tempered Film
- Base (Docking Station)
- Full aluminum alloy desktop bracket
- Portable waterproof case

Figure 3: Optional Accessories
3. Device Layout and Ports
Familiarize yourself with the tablet's physical features and connectivity options.

Figure 4: Tablet Layout and Ports
Ports:
- Type-C USB3.0: For data transfer and charging.
- Type-A USB3.0: For connecting USB devices.
- RS232 (DB9): Serial port for industrial connections.
- 3.5mm Standard Headphone Jack: For audio output.
- TF Card Slot: Supports up to 256GB expansion.
- Standard Micro SIM Card Slot: For cellular connectivity (if 4G/5G optional function is present).
- Micro HDMI: For video output to external displays.
- DC Port (12V-4A): For power input (outer diameter 3.5mm, inner diameter 1.35mm).
- 12Pin USB+charger (POGO PIN): For docking station connectivity.
- RJ45: 100/1000M Ethernet port.

Figure 5: Close-up of Tablet Ports
4. Setup
4.1 Initial Charging
Before first use, fully charge the tablet using the provided power adapter. Connect the adapter to the DC port on the tablet and plug it into a power outlet. The charging indicator will show the charging status.
4.2 Inserting SIM/TF Card
- Locate the SIM/TF card slot cover on the side of the tablet (refer to Figure 4).
- Carefully open the protective cover.
- Insert the Micro SIM card into the designated SIM card slot with the gold contacts facing down.
- Insert the TF card (MicroSD card) into the designated TF card slot.
- Ensure both cards are seated correctly and close the protective cover firmly to maintain IP68 rating.
4.3 Power On/Off
- Power On: Press and hold the Power button (refer to Figure 4) for a few seconds until the screen lights up.
- Power Off: Press and hold the Power button, then select 'Shut down' from the options on the screen. Alternatively, a short press will put the tablet to sleep.
5. Operating Instructions
5.1 Operating System
Your tablet comes pre-installed with Windows 11 Pro (Default) or Windows 10 (Optional). Navigate the interface using the touch screen. Standard Windows operations apply.

Figure 6: Windows Operating System Options
5.2 Touch Screen
The 10.1-inch IPS HD screen supports 10-point G+G touch with a hardness of ≥7H. It also supports glove touch, making it suitable for various work environments. Brightness is adjustable for clear visibility even in sunlight (700cd/m²).

Figure 7: High-Definition Touch Screen
5.3 Wireless Connectivity
The tablet supports stable wireless connections for real-time data upload and inventory management.
- Wi-Fi: Dual-band 2.4G+5.8G (802.11 a/b/g/n/ac) for high-speed internet access.
- Bluetooth 5.0: For connecting wireless peripherals with a transmit distance of 10m.
- 4G/5G (Optional): For cellular data connectivity (requires a Micro SIM card).

Figure 8: Wireless Connectivity Options
5.4 Optional Functions
- 1D/2D Barcode Scanner: For efficient data collection (custom function). Supports various barcode types including Code 128, EAN-13, QR Code, Data Matrix, etc.
- NFC (Near Field Communication): High-frequency 13.56MHz, adapting 14443A/14443B/15693 protocols (custom function).
- Fingerprint Scanner: For secure authentication (optional).

Figure 9: Integrated Barcode Scanner

Figure 10: NFC Functionality
5.5 Docking Station (Optional)
The optional docking station provides additional connectivity and charging capabilities via the 12Pin POGO PIN connector. It typically includes a 12V DC input, COM port (RS232), LAN port (RJ45), and additional USB ports.
Video 1: Product demonstration showing IP68 protection, Windows 11, glove touch screen, adjustable brightness, and port details, including the docking station.
6. Maintenance
6.1 Cleaning
To clean the tablet, use a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the screen or casing. Ensure all port covers are securely closed before cleaning to maintain water and dust resistance.
6.2 IP68 Rating
The tablet is IP68 rated, meaning it is waterproof, dustproof, anti-shock, anti-pressure, and anti-drop. This robust design ensures durability in harsh environments. However, always ensure all port covers are sealed to maintain this protection.

Figure 11: IP68 Rugged Design
6.3 Battery Care
The tablet is equipped with a 7.6V/5000mAh high-voltage lithium battery. To prolong battery life:
- Avoid extreme temperatures.
- Do not fully discharge the battery frequently.
- Store the tablet with a partial charge if not used for extended periods.
6.4 Software Updates
Regularly check for and install operating system and driver updates to ensure optimal performance and security. These updates are typically managed through the Windows Update settings.
7. Troubleshooting
- Tablet not powering on: Ensure the battery is charged. Connect the power adapter and try again.
- Touch screen unresponsive: Restart the tablet. If the issue persists, ensure the screen is clean and free of debris.
- No Wi-Fi/Bluetooth connection: Check if Wi-Fi/Bluetooth is enabled in Windows settings. Ensure you are within range of a network/device.
- Device running slow: Close unnecessary applications. Check for available storage space. Consider performing a system cleanup or factory reset if issues persist (back up data first).
- Optional scanner/NFC not working: Ensure the feature is enabled in settings or the relevant application. Check for driver updates.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | CHWEIDA |
| Model Number | RT-I10Y-N5100 |
| Product Type | Flatbed Scanner (Tablet PC with scanning capabilities) |
| CPU | Intel JASPER LAKE N5100 Quad Core 4 Thread (1.1GHz-2.8GHz) |
| RAM/ROM | 8GB+128GB (M.2 SSD) (16G+256GB Optional) |
| Display | 10.1 inch 1280*800 resolution IPS 700Nit (1920*1200 optional) |
| Touch Screen | 10-point touch G+G, hardness ≥7H, glove touch support |
| Operating System | Windows 11 Pro (Default), Windows 10 (Optional) |
| Battery | 7.6V/5000mAh high voltage lithium battery, non-removable, battery life ≥7h (1080P+50% brightness) |
| Camera | Front 5.0MP, Rear 12.0MP auto focus |
| Interface Type | USB/WIFI/Bluetooth |
| Signal Connection Type | Bluetooth, Wi-Fi (2.4G+5.8G dual-band), 4G/5G (optional) |
| GPS | GPS, Beidou, Galileo, GLONASS |
| IP Grade | IP68 (Waterproof, dustproof, anti-shock, anti-pressure, anti-drop) |
| Drop Height | 1.2m Free fall to wooden floor |
| Working Temperature | -20°C ~ 60°C (custom -30°C ~ 60°C) |
| Storage Temperature | -30°C ~ 70°C (custom -40°C ~ 70°C) |
| Humidity | 95% Non-Condensing |
| Certifications | CE, RoHS, US military standard-810G, ISO quality certification system |
| Standard Accessories | 4 points Strap, Adapter, User guide |
| Optional Features | 4G/2D Scanner/NFC, Fingerprint, UHF, 5G, Docking Station |

Figure 12: Hardware Configuration Details

Figure 13: Additional Specifications
9. User Tips
- Optimize Battery Life: Reduce screen brightness, disable unnecessary wireless features (Wi-Fi, Bluetooth, 4G) when not in use, and close background applications to extend battery life.
- Screen Protection: While the screen is durable, consider using a tempered film (optional accessory) for added scratch protection in demanding environments.
- Data Backup: Regularly back up important data to an external drive or cloud storage to prevent data loss.
- Port Covers: Always ensure all port covers are securely closed when working in wet or dusty conditions to maintain the IP68 rating.
10. Warranty and Support
For warranty information, technical support, or inquiries about optional functions (such as fingerprint, UHF, 5G, and memory upgrades), please contact the manufacturer or your vendor.
Contact Information:
- Company: Shenzhen CHWEIDA Technology Co., Ltd.
- Telephone: +86-0755-89221485
- Mobile: +86-13713810467
- Skype: xcl.jason
- Whatsapp: +86-13713810467
- Email: jason@rugline-tech.com

Figure 14: Customer Support