BAOFENG UV-20M

Contents

BAOFENG UV-20M Two Way Radio User Manual

Model: UV-20M / BF-UV20

1. Introduction

The BAOFENG UV-20M is a portable dual-band two-way radio designed for reliable communication. Featuring a 1.77-inch TFT large screen, full keyboard, and Type-C charging, it offers a range of functions including FM radio, VOX, scanning, and up to 999 memory channels. This manual provides essential information for the safe and efficient operation of your UV-20M radio.

BAOFENG UV-20M Walkie Talkie with key features listed: UV-20 Portable Two Way Radios, FM Radios, 5W/Dual Band, 999 CH, Support TYPE-C

Figure 1: BAOFENG UV-20M Walkie Talkie overview with key features.

2. Package Contents

Please check the package carefully to ensure all items are present and in good condition:

  • BAOFENG UV-20M Radio Unit
  • Li-ion Battery Pack
  • Antenna
  • Back Clip
  • Lanyard
  • Charger Cable (Type-C)
  • Power Adapter
  • User Manual
Image showing all components included in the BAOFENG UV-20M package: Radio, Battery, Antenna, Back Clip, Lanyard, Charger Cable, Adapter, Manual.

Figure 2: Contents of the product package.

3. Product Overview

Familiarize yourself with the main parts and controls of your UV-20M radio:

Diagram of the BAOFENG UV-20M radio with labels for Antenna, Color LCD, MENU Key, keypad, Speaker, EXIT Key, Power/volume knob, Pilot lamp, MIC/SP, Lamp switch, and PTT Key.

Figure 3: Labeled parts and controls of the UV-20M radio.

  • Antenna: For transmitting and receiving signals.
  • Power/Volume Knob: Turn clockwise to power on and increase volume; turn counter-clockwise to decrease volume and power off.
  • Pilot Lamp: Indicates power status or other functions.
  • Color LCD: Displays frequency, channel, menu options, and other information.
  • MENU Key: Accesses the radio's menu system.
  • EXIT Key: Exits menu or cancels current operation.
  • Keypad: For entering frequencies, channel numbers, and navigating menus.
  • Speaker: Outputs received audio.
  • MIC/SP Jack: For connecting external microphone/speaker accessories.
  • Lamp Switch: Activates the built-in LED flashlight.
  • PTT Key (Push-to-Talk): Press and hold to transmit, release to receive.

4. Initial Setup

4.1. Attaching the Battery

  1. Align the battery pack with the grooves on the back of the radio.
  2. Slide the battery upwards until it clicks into place.
  3. To remove, press the battery release latch (if present) and slide the battery downwards.

4.2. Attaching the Antenna

  1. Screw the antenna into the connector on the top of the radio clockwise until it is firm.
  2. Do not overtighten.

4.3. Charging the Battery

The UV-20M supports Type-C direct charging and charging via a charging stand.

Diagram showing the Type-C charging port on the bottom of the radio and icons indicating charging from Car, PC, Charger, and Power Bank.

Figure 4: Type-C charging options for the UV-20M.

  1. Connect the Type-C charger cable to the port at the bottom of the radio.
  2. Connect the other end to a compatible power source (e.g., power adapter, PC USB port, power bank, car charger).
  3. The charging indicator on the radio will show the charging status.
  4. Ensure the radio is turned off during charging for optimal battery life.

5. Operation

5.1. Power On/Off and Volume Adjustment

  1. To power on, rotate the Power/Volume knob clockwise until you hear a click.
  2. To adjust the volume, continue rotating the knob.
  3. To power off, rotate the knob counter-clockwise until it clicks.

5.2. Basic Communication

  1. Ensure the radio is powered on and set to the desired frequency or channel.
  2. To transmit, press and hold the PTT (Push-to-Talk) button on the side of the radio. Speak clearly into the microphone.
  3. Release the PTT button to receive.

5.3. Menu Navigation

The UV-20M features a 1.77" TFT large screen and a full keyboard for menu operation.

Video 1: Demonstration of menu navigation and settings on the BAOFENG UV-20M walkie talkie.

  1. Press the MENU key to enter the main menu.
  2. Use the Up/Down arrow keys to scroll through menu options.
  3. Press OK or MENU again to select an option.
  4. Use the keypad to enter values or select sub-options.
  5. Press the EXIT key to go back to the previous menu or exit the menu system.

5.4. Key Features and Functions

Diagram illustrating various features of the UV-20M: 1000 Channels, FM Radio, CTCSS DCS, SOS Function, VOX, Scan Function, Large Screen, Squelch Adjustment, Long Standby, Type-C Charger, Power Save, Channel Mode, Frequency Mode.

Figure 5: Overview of UV-20M features.

  • Dual Band & Dual Watch: Monitor two different frequencies simultaneously.
  • FM Radio (65-108 MHz): Listen to broadcast FM radio.
  • VOX Function: Voice-activated transmission, allowing hands-free operation. Adjust VOX sensitivity in the menu.
  • Scan Function: Scan VFO, channels, CTCSS/DCS codes.
  • CTCSS/DCS Tones: Use these to filter out unwanted calls and for private communication.
  • Channel Mode / Frequency Mode: Switch between channel mode (pre-programmed channels) and frequency mode (direct frequency input).
  • Squelch Adjustment: Adjust the squelch level (1-10) to suppress background noise.
  • LED Flashlight: Activate the built-in flashlight using the dedicated lamp switch.
  • Keypad Lock: Prevents accidental key presses.
  • Alarm Function: Activates an emergency alarm.
  • High/Low Power: Select between high and low transmission power for battery saving or extended range.
  • DTMF Encoder: For sending DTMF tones.
  • ANI: Automatic Number Identification.

6. Specifications

FeatureSpecification
Brand NameBAOFENG
Model NumberBF-UV20M
Output Power (W)5W-10W
Battery Capacity (mAh)2800
Waterproof / Water-ResistantNo
Battery IncludedYes
MaterialPlastic
Storage Channel999
Frequency Range136-174MHz / 400-520MHz
Dimensions (except Antenna)122*57*35 mm
Walkie Talkie TypePortable
DisplayYes (1.77" TFT)
Maximum Range5km-10km
OriginMainland China
Accessory PortTwo (2) pins for Kenwood accessory port

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
  • Battery Care: Avoid overcharging or completely draining the battery. Store the radio and battery in a cool, dry place when not in use for extended periods.
  • Antenna: Ensure the antenna is securely attached. Do not operate the radio without an antenna, as this can damage the transmitter.
  • Water Exposure: This radio is not waterproof. Avoid exposure to rain, splashes, or immersion in water.
  • Temperature: Do not expose the radio to extreme temperatures (hot or cold).

8. Troubleshooting

ProblemPossible CauseSolution
Radio won't turn onLow battery; Battery not properly installedCharge the battery; Reinstall the battery correctly
Cannot transmit or receiveIncorrect frequency/channel; Antenna loose or damaged; Out of rangeVerify frequency/channel settings; Check antenna connection; Move closer to other radios
Poor audio qualityLow signal strength; Squelch level too high; Microphone/speaker issueAdjust squelch level; Check antenna; Ensure clear line of sight
Keypad unresponsiveKeypad lock activatedDeactivate keypad lock (refer to manual for specific key combination)

9. User Tips

  • For optimal range, ensure your antenna is fully extended and you have a clear line of sight to the other radio.
  • Utilize the Type-C charging feature for convenient charging on the go with power banks or car chargers.
  • Experiment with the VOX sensitivity settings to find the best level for hands-free operation in your environment.
  • Regularly check your battery level, especially before extended use, to avoid unexpected power loss.
  • Consider programming frequently used channels for quick access.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.