1. Introduction
The AIFEN A11 is a portable USB soldering station designed for precision soldering tasks, particularly suitable for cell-phone repair and other delicate welding applications. Its compact design, fast heating capabilities, and compatibility with various power sources make it a versatile tool for professionals and hobbyists alike. This manual provides essential information for the safe and effective use of your AIFEN A11 soldering station.

2. Safety Information
Please read and understand all safety instructions before using the AIFEN A11 soldering station. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always wear appropriate personal protective equipment, including safety glasses, when operating the soldering iron.
- Ensure adequate ventilation in your workspace to avoid inhaling solder fumes.
- The soldering tip can reach very high temperatures. Avoid direct contact with skin or flammable materials.
- Always place the soldering iron in a suitable heat-resistant stand when not in use.
- Do not use the soldering iron near flammable liquids or gases.
- Keep out of reach of children.
- Disconnect the power supply when cleaning or replacing tips.
- Use only compatible and genuine replacement parts and accessories.
3. Package Contents
Verify that all items are present and in good condition upon opening the package:
- AIFEN A11 Soldering Iron Handle
- USB Charger (may vary by region, e.g., EU or US plug)
- USB Data Cable (Type-C)
- Soldering Tips (C210 model, quantity may vary)
- Storage Tin Box

Video 1: AIFEN A11 Unboxing and Initial Setup Demonstration.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | AIFEN A11 |
| Temperature Range | 100-450°C (212-842℉) |
| Interface Type | USB Type-C |
| Supported Protocols | QC3.0 / PD / AFC / FCP |
| Voltage Range / Power Output | 5V/10W, 9V/27W, 12V/45W, 15V/60W, 18V/75W (18V applicable only with special bracket) |
| Compatible Soldering Tip Model | C210 |
| Weight (Soldering Iron) | 6.8g |
| Certification | CE |


5. Setup
- Insert Soldering Tip: Carefully insert the desired C210 series soldering tip into the front end of the A11 soldering iron handle. Ensure it is seated firmly.
Video 2: Demonstration of inserting a soldering tip into the A11 handle.
- Connect Power Supply: Connect the USB Type-C cable to the A11 soldering iron and then to a compatible power source. The A11 requires a high-power transformer to achieve optimal performance. It supports QC3.0, PD, AFC, and FCP protocols.
- Important: The soldering station requires high power when heating up. Ensure your power supply does not have overvoltage or overcurrent protection that would cause the device to restart.
- For best results, use a power supply with sufficient wattage (e.g., 15V/60W or 20V/75W). An optional special bracket can support 18V/75W.

Figure 5: AIFEN A11 powered by a portable power bank. 
Figure 6: AIFEN A11 connected to a wall charger. 
Figure 7: Examples of EU and US plug types for the charger.
6. Operating Instructions
- Power On and Initial Heating: Once connected to a power source, the LED display will activate, showing the current temperature and other parameters. The iron will begin to heat up rapidly.
Video 3: LED display activation and temperature rising.
- Temperature Adjustment: Use the adjustment buttons on the handle to set the desired temperature.
- Press the left button to decrease the temperature (°C).
- Press the right button to increase the temperature (°C).
- Long press either button for quick temperature adjustment.
- Press down the adjustment button for 1 second to switch between Celsius (°C) and Fahrenheit (°F).

Figure 8: AIFEN A11 display and adjustment buttons. Video 4: Demonstration of temperature adjustment and °C/°F toggle.
- Voltage Option and Calibration: Press the adjustment button for 3 seconds on the voltage display to enter the voltage option function. Adjust parameters left and right for 5V/9V/12V/15V/20V. Long press to save and exit. For temperature calibration, press and hold for 3 seconds on the voltage interface to enter the calibration interface. Adjust parameters left and right (±99 degree calibration), then press and hold to save and exit.
- Gyroscope Function (Dormancy Mode): The A11 features a gyroscope function. When the iron is at rest and still, it will enter a dormancy (sleep) mode to conserve energy and prevent tip oxidation. Simply pick up the iron to immediately switch it back to active working status.

Figure 9: Gyroscope function for automatic dormancy. Video 5: Demonstration of sleep mode after resting.
- Soldering: Once the desired temperature is reached, apply the soldering tip to the joint and feed solder. The A11 offers fast tin melting.
Video 6: Demonstration of fast tin melting.
7. Maintenance
- Tip Cleaning: Regularly clean the soldering tip using a damp sponge or brass wool to remove excess solder and oxidation. This helps maintain optimal heat transfer and extends tip life.
- Tip Tinning: After cleaning and before storing, always tin the tip with a fresh layer of solder to prevent oxidation.
- Storage: Store the soldering iron in its original tin box or a suitable protective case when not in use.
- General Cleaning: Wipe the handle and display with a soft, dry cloth. Do not use abrasive cleaners or solvents.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Soldering iron restarts frequently or fails to heat up properly. | Insufficient power supply or overvoltage/overcurrent protection triggering. | Ensure you are using a high-power transformer (e.g., 15V/60W or 20V/75W) that can handle the initial power draw. If a suitable power source is unavailable, select low-voltage mode through the settings menu on the controller (note: this may reduce efficiency). |
| Tip not melting solder effectively. | Incorrect temperature setting, oxidized tip, or worn-out tip. | Increase temperature, clean and re-tin the tip. If the problem persists, replace the soldering tip. |
| Display is blank or unresponsive. | No power, loose connection, or internal fault. | Check USB-C connection and power source. Try a different cable or power adapter. If still unresponsive, contact support. |
9. User Tips
- Power Supply Choice: Many users find that a robust power delivery (PD) charger, especially one designed for laptops, works exceptionally well with the A11, providing stable and sufficient power for quick heating.
- Replacement Tips: The AIFEN A11 uses C210 series soldering tips. These are widely available from electronics suppliers. Ensure you purchase tips compatible with the C210 standard for proper fit and function.
- Portability: Leverage the A11's USB-C compatibility by using a high-capacity power bank for on-the-go repairs, making it truly portable for field work.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.