Introduction
Thank you for choosing the TESSAN Universal Travel Adapter. This device is designed to provide a convenient and efficient charging solution for your electronic devices while traveling worldwide. It features multiple plug types, USB-A and USB-C ports, and advanced GaN technology for fast and safe charging.
Important Note: This adapter is NOT a voltage converter. Ensure your devices are compatible with the local voltage before use.
Setup and Plug Selection
The TESSAN Universal Travel Adapter is equipped with retractable pins to support various international outlets. Follow these steps to select the appropriate plug type:
- Identify the required plug type: The adapter supports Type A (USA/Japan/Canada), Type C (Europe/Germany/France/Italy), Type G (UK/Ireland/Singapore), and Type I (Australia/China/Argentina).
- Retract/Extend Pins: Use the sliders on the side of the adapter to extend the correct pins for your destination. Push the slider corresponding to the desired region (e.g., EU, UK, US, AU) until the pins are fully extended.
- Connect to Wall Outlet: Once the correct pins are extended, firmly insert the adapter into the wall outlet.



Operating Instructions
The TESSAN Universal Travel Adapter allows you to charge multiple devices simultaneously using its AC outlet, USB-A ports, and USB-C ports.
Charging Devices
- AC Outlet: Plug your device's power cord into the universal AC outlet on the adapter. This outlet supports 100-250V, 10A MAX, 2500W MAX.
- USB-A Ports: Connect your USB-A charging cables to the available USB-A ports.
- USB-C Ports: Connect your USB-C charging cables to the available USB-C ports for fast charging compatible devices.






GaN Technology and Safety Features
The TESSAN adapter utilizes advanced GaN (Gallium Nitride) technology, allowing for a compact design while delivering high power output. It incorporates multiple safety protections for your devices:
- Over-Power Protection
- Over-Voltage Protection
- Over-Charge Protection
- Over-Temperature Protection
- Fuse Protection


Do not use with high-power appliances such as hair dryers, curling irons, or electric toothbrushes, as this adapter is not a voltage converter.
Maintenance
- Keep the adapter dry and away from moisture.
- Clean the adapter with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Store in a cool, dry place when not in use.
- Fuse Replacement: If the adapter stops working, the fuse may need replacement. Locate the fuse compartment (refer to Figure 11) and replace the blown fuse with a new one of the same rating (10A).
Troubleshooting
- Adapter is not providing power:
- - Ensure the adapter is fully plugged into a live wall outlet.
- - Check if the correct plug pins are fully extended for the region.
- - Verify the wall outlet is functioning by testing with another device.
- - Check the fuse and replace if blown (refer to Maintenance section).
- Device is charging slowly:
- - Ensure your device and cable support fast charging protocols (e.g., USB PD) to utilize the adapter's full potential.
- - When multiple devices are connected, the total output power is shared, which may reduce individual charging speeds.
- Adapter feels warm during use:
- - It is normal for the adapter to feel warm during operation, especially during fast charging or when multiple devices are connected. The built-in over-temperature protection will prevent overheating.
- - If it becomes excessively hot or emits smoke/unusual odors, immediately unplug it and discontinue use.
Specifications
| Feature | Specification |
|---|---|
| Brand | TESSAN |
| Model Numbers | TS-WTA02-WHB (35W), TS-WTA03-WHB (65W), TS-WTA04-WHB (100W) |
| Type | International Plug Adaptor |
| Rated Voltage | 100-250V |
| Rated Current | 10A MAX |
| Rated Power | 2500W MAX |
| Input | 100-250V, 50-60Hz |
| USB Ports Number | Varies by model (e.g., 2 USB-A, 2-3 USB-C) |
| Support Quick Charge | USB PD |
| Overload Protection | Yes |
| Certifications | CE, FCC, RoHS |
| Dimensions (TS-WTA03-WHB 65W) | Approx. 7.70 cm x 5.00 cm x 5.30 cm |
| Dimensions (TS-WTA02-WHB 35W) | Approx. 7.62 cm x 5.01 cm x 5.31 cm |
| Dimensions (TS-WTA04-WHB 100W) | Approx. 9.35 cm x 5.51 cm x 5.41 cm |
Detailed Output Specifications by Model:
TS-WTA02-WHB (35W Model)
| Port | Single Port Output | Multi-Port Output |
|---|---|---|
| USB-A1/A2/C1/C2 | 5V~2.4A (12W) | Shared 5V~3A (15W Total), 2.4A Max Per Port |
| USB-C3 | 5V~3.0A (15W), 9V~3.0A (27W), 15V~2.33A (35W), 20V~1.75A (35W) | 5V~2.4A (12W), 9V~2.22A (20W), 12V~1.67A (20W) |
| Total DC Output | 35W | |

TS-WTA03-WHB (65W Model)
| Port | Single Port Output | Combined Output |
|---|---|---|
| C1/C2 | 5V~3.0A (15W), 9V~3.0A (27W), 12V~3.0A (36W), 15V~3.0A (45W), 20V~3.25A (65W) | C1: 5V~3.0A (15W), 9V~2.22A (20W), 12V~1.67A (20W) C2: 5V~3.0A (15W), 9V~3.0A (27W), 12V~3.0A (36W), 15V~3.0A (45W), 20V~2.25A (45W) |
| A1 | 4.5V~5.0A (22.5W), 5V~4.5A (22.5W), 5V~3.0A (15W), 9V~3.0A (27W), 12V~3.0A (36W), 20V~3.0A (60W) | C1+A1: 5V~3.0A (15W) |
| A2 | 5V~1.0A (5W) | A2: 5V~1.0A (5W) (when C1+C2+A1+A2 are used) |
| Total DC Output | 65W | |

TS-WTA04-WHB (100W Model)
| Port | Single Port Output | Combined Output |
|---|---|---|
| C1/C2 | 5V~3.0A (15W), 9V~3.0A (27W), 15V~3.0A (45W), 20V~5.0A (100W) | C1: 5V~3.0A (15W), 9V~3.0A (27W), 15V~3.0A (45W), 20V~3.25A (65W) C2: 5V~3.0A (15W), 9V~3.0A (27W), 15V~2.33A (35W), 20V~1.75A (35W) |
| A1/A2 | 5V~3.0A (15W), 9V~2.0A (18W), 12V~1.5A (18W) | A1+A2: 5V~3.0A (15W) (when C1+C2+A1+A2 are used) |
| Total DC Output | 100W | |

Warranty and Support
TESSAN products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official TESSAN website.
This product includes built-in safety features such as Overload Protection to ensure reliable operation.
Video Demonstration
Watch this video for a quick overview of the TESSAN Universal Travel Adapter's features and usage: