Introduction
This manual provides detailed instructions for the AILEHKUO R1 Portable Bluetooth Selfie Stick Tripod. This versatile device combines a selfie stick, a tripod, and a fill light, complete with a wireless remote shutter, designed to enhance your photography and videography experience with smartphones.
Key features include Bluetooth connectivity, a foldable and compact design for portability, a wireless remote control for hands-free operation, and an integrated beauty fill light to improve lighting conditions for your photos and videos.
Figure 1: AILEHKUO R1 Selfie Stick Tripod in various colors and configurations.
Product Overview
The AILEHKUO R1 is an all-in-one solution for mobile content creation, offering multiple functionalities in a compact form factor.
Components:
- Selfie Stick: Extendable rod for wider shots.
- Tripod: Integrated foldable legs for stable desktop or ground placement.
- Phone Holder: Adjustable clamp to secure your smartphone.
- LED Fill Light: Provides additional illumination for improved photo/video quality.
- Bluetooth Remote Control: Detachable wireless remote for hands-free photo capture and video recording.
Figure 2: R1S model highlighting 360-degree rotation and maximum extension.
Figure 3: Detailed view of the selfie stick's key components.
Setup Instructions
1. Unfolding the Tripod and Extending the Stick:
- Gently pull the bottom part of the handle to extend the tripod legs. Be careful not to force it, as it might be stiff initially.
- Extend the telescopic rod to your desired length. The maximum extended length is 740mm.
- Adjust the phone holder to the desired angle. The holder supports 360-degree rotation for horizontal or vertical shooting.
Figure 4: Demonstrating various setup configurations.
2. Mounting Your Smartphone:
- Carefully place your smartphone into the adjustable phone holder. Ensure it is securely clamped. The maximum clamping distance is 90mm.
3. Bluetooth Remote Control Pairing:
- Locate the detachable remote control. It is typically attached to the stick itself. Gently pull it out of its slot.
- Hold and press the remote button for 3 seconds to power it on. The LED indicator will blink.
- On your smartphone, go to Bluetooth settings and search for available devices.
- Select "SelfieCom" from the list of devices to pair. The LED indicator on the remote will stop flashing once successfully connected.
- If the remote does not power on or pair, you may need to reset its battery. Open the remote (a butter knife can help), remove the CR1632 battery, and reinsert it with the writing facing up. Close the remote and try pairing again.
Figure 5: Remote control and fill light features.
4. LED Fill Light Activation:
- Hold and press the selfie light power button for 3 seconds to turn the light on or off.
Operating Instructions
1. Using the Bluetooth Remote Control:
- Once paired, use the remote control to capture pictures or record videos. The LED will flash once per action.
- To power off the remote, hold and press the remote button until the LED indicator flashes 3 times, then it will shut down.
- The remote will automatically shut down after 5 minutes if not paired.
- The remote will automatically enter sleep mode after 10 minutes of no operation and will auto shut down after another 10 minutes if not awakened.
2. Adjusting the LED Fill Light:
- After turning on the fill light (hold 3 seconds), short press the selfie light power button to cycle through different LED brightness levels. The light offers 3 modes and 6 color temperatures (warm light, cold light, mixed light).
3. Horizontal and Vertical Shooting:
- The phone holder can be rotated 360 degrees, allowing you to easily switch between horizontal and vertical camera modes to suit your content needs.
Video 1: Product demonstration showing setup, light modes, remote use, and extension.
Battery Replacement (Remote Control)
The remote control uses a CR1632, 3V battery. If the remote is unresponsive or the LED indicator does not light up, the battery may need replacement.
- Separate the remote control from the side of the selfie stick.
- Carefully open the remote control casing.
- Remove the old CR1632 battery.
- Insert a new CR1632 battery, ensuring the positive (+) side (usually with text) is facing up.
- Reverse the assembly to close the remote control.
Note: Continuous shooting is not supported by the remote control.
Figure 6: Remote control battery replacement diagram.
Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, moisture, or direct sunlight.
- Store the selfie stick in its folded, compact form when not in use to prevent damage.
- Ensure the phone holder clamp is free of debris to maintain a secure grip on your smartphone.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not pairing/connecting. | Remote battery low or not properly seated; not in pairing mode; incorrect Bluetooth device selected. |
|
| LED fill light not turning on or flashing red when charging. | Light battery depleted; charging cable issue; light malfunction. |
|
| Tripod legs are difficult to open. | New product stiffness. | Gently apply pressure to open the legs. They may loosen with repeated use. Avoid excessive force. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | R1 |
| Max Extended Length | 740mm |
| Folded Length | 185mm |
| Weight | 110g |
| Material | Stainless Steel |
| Communication | Bluetooth |
| Remote Control Support | Yes |
| Configured for | Smartphones |
| Remote Battery Type | CR1632, 3V |
| Max Phone Clamping Distance | 90mm |
User Tips
- Opening Tripod Legs: The tripod legs might be stiff when new. Open them gently to avoid damage. They tend to become easier to open with repeated use.
- Finding the Remote: The Bluetooth remote control is cleverly integrated into the stick's handle. Simply pull it out from its slot when needed.
- Bluetooth Pairing: If you encounter issues pairing the remote, try removing and reinserting the CR1632 battery in the remote, ensuring the side with text faces up. Then, press and hold the remote button until the light flashes, and connect via your phone's Bluetooth settings to "SelfieCom".
- Fill Light Brightness: The integrated fill light offers multiple brightness settings. Short press the light's power button to cycle through them and find the perfect illumination for your environment.
- Portability: This selfie stick tripod is lightweight and compact, making it ideal for carrying in a pocket or bag for on-the-go photography and videography.
Safety Information
FCC Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
IC Warning (Canada):
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC's RF Exposure guidelines, this device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or transmitter.
Warranty and Support
For technical support or any product-related inquiries, please contact:
Email: keithzhj@foxmail.com
If the item is damaged upon arrival or experiences issues, please contact support immediately before leaving feedback. We recommend that children aged 14 and above use this product.
This product is manufactured in Mainland China.
User manual (PDF) reference: View PDF Manual