1. Introduction
The Lemorele P30 is a wireless HDMI transmitter and receiver system designed to seamlessly connect your HDMI-enabled devices to AR glasses, portable screens, or other display devices without the need for cables. It supports high-definition video transmission up to 1080P at 60Hz, utilizing 5G and 2.4G WiFi for stable and efficient wireless communication. This manual provides detailed instructions for setting up, operating, and maintaining your P30 system.

Figure 1: Lemorele P30 Wireless Transmitter (TX) and Receiver (RX) units.
2. Safety Information
- Always use the recommended power supply (5V/1A external USB adapter) for both the transmitter (TX) and receiver (RX) units to ensure stable operation and prevent overheating or signal dropouts.
- Do not expose the device to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the device to severe impacts.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Keep the device away from strong electromagnetic fields.
3. Package Contents
Please check the box for the following items:

Figure 2: Contents of the Lemorele P30 Portable Wireless HD Kit.
- Product packaging box
- Product Manual (this document)
- TX (Transmitter) unit
- RX (Receiver) unit
- Micro HDMI to HDMI adapter
- Mini HDMI to HDMI adapter
- USB-A to C cable (x2, for power)
4. Specifications
| Feature | Description |
|---|---|
| Model Number | P30 |
| Brand Name | Lemorele |
| Resolution | 1080P@60Hz Ultra HD |
| Wireless Protocol | 2.4G/5G WiFi |
| Transmission Distance (Line of Sight) | Up to 165ft (50m) |
| Transmission Distance (Through Wall/Floor) | Up to 32ft (10m) |
| Power Input | 5V/1A (via USB-C) |
| Compatible Transmission Devices | Desktop PC, Laptop, Game Console, Set-top Box |
| Compatible Receiver Devices | Monitor, Television, Projector, AR Glasses (e.g., XREAL Air, Rokid), Portable Screen |
| Features | Plug & Cast, Mirror/Extend Modes, Efficient Heat Dissipation |
5. Setup Instructions
The Lemorele P30 system is designed for plug-and-play operation, with the transmitter (TX) and receiver (RX) units pre-paired from the factory. No additional apps, Bluetooth, or WiFi configuration is required for initial setup.
5.1 Connecting the Transmitter (TX)
- Connect the HDMI IN port of the TX unit to the HDMI output of your source device (e.g., Desktop PC, Laptop, Game Console, Set-top Box) using an HDMI cable. Use the provided Micro HDMI or Mini HDMI adapters if necessary.
- Connect one of the provided USB-A to C cables to the USB-C Power port on the TX unit. Plug the USB-A end into an external 5V/1A USB power adapter (not included) and then into a power outlet.
5.2 Connecting the Receiver (RX)
- For traditional displays (Monitor, TV, Projector): Connect the HDMI OUT port of the RX unit to the HDMI input of your display device using an HDMI cable.
- For AR Glasses or Portable Screens: Connect the USB-C AR port of the RX unit directly to the USB-C input of your AR glasses or portable screen. Ensure your AR glasses/portable screen support video input via USB-C.
- Connect the second provided USB-A to C cable to the USB-C Power port on the RX unit. Plug the USB-A end into an external 5V/1A USB power adapter (not included) and then into a power outlet.

Figure 3: Connection diagram for TX and RX units, highlighting power input.

Figure 4: Universal compatibility and connection overview.
6. Operating Instructions
6.1 Powering On
Once both the TX and RX units are connected to their respective power sources and devices, they will automatically power on and attempt to establish a wireless connection. The LED indicators on the units will show their status.
6.2 Plug & Cast
The P30 system is designed for immediate use. Simply connect your source and display devices, power on the units, and the video signal will be wirelessly transmitted. There is no complex pairing process required after the initial factory pairing.

Figure 5: Simple 'Plug & Cast' operation.
6.3 Mirror and Extend Modes
The P30 supports both mirror and extend display modes, depending on the capabilities of your source device and operating system. You can duplicate your screen or display different content on the connected display/AR glasses.
6.4 One-Click Switch
The TX unit features a button for quick switching. If you have multiple sources connected to the TX unit (e.g., via an HDMI splitter, though not explicitly stated, this is a common feature for such buttons), or if the TX unit has multiple inputs, this button allows you to cycle through them. For single HDMI input, it might serve as a re-sync button.

Figure 6: One-click switch functionality.
7. Maintenance
- Clean the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Ensure proper ventilation around the units to prevent overheating. The P30 is designed with efficient heat dissipation.
- Store the device in a cool, dry place when not in use.
- Avoid bending or stressing the cables and connectors excessively.

Figure 7: Efficient heat dissipation design.
8. Troubleshooting
8.1 No Signal or Intermittent Signal
- Power Supply: Ensure both the TX and RX units are powered by a stable 5V/1A external USB adapter. Insufficient power is a common cause of signal dropouts or overheating.
- Cable Connections: Verify that all HDMI and USB-C power cables are securely connected to their respective ports on the TX, RX, source, and display devices.
- Distance and Obstacles: The wireless transmission range is up to 165ft (50m) in line of sight. Walls, floors, and other obstacles can significantly reduce this range to approximately 32ft (10m). Try reducing the distance between the TX and RX units or moving them to a location with fewer obstructions.
- Interference: Other wireless devices operating on 2.4GHz or 5GHz frequencies might cause interference. Try to minimize other wireless activity in the immediate vicinity.
- Source/Display Compatibility: Ensure your source device is outputting a compatible HDMI signal (up to 1080P@60Hz) and your display device is correctly set to the HDMI input.
8.2 Overheating
- Power Supply: As mentioned, an inadequate power supply (less than 5V/1A) can cause overheating. Use a dedicated 5V/1A USB power adapter for each unit.
- Ventilation: Ensure the units are placed in a well-ventilated area and their vents are not obstructed.
9. User Tips
- Mobile Device Connectivity: If you intend to transmit from a mobile phone (e.g., Samsung A20) to AR glasses, ensure your mobile device supports video output via its USB-C port (DisplayPort Alt Mode). If it does, you can connect the phone directly to the TX unit's HDMI IN port using an appropriate USB-C to HDMI adapter (not included), or connect the RX unit's USB-C AR port directly to your AR glasses.
- Optimal Performance: For the best wireless performance, try to maintain a clear line of sight between the TX and RX units.
- Gaming and Entertainment: The P30 is an excellent companion for gaming consoles (Steamdeck, PlayStation, Xbox) and streaming devices, allowing you to enjoy content on AR glasses or portable screens with minimal latency.

Figure 8: Enjoying gaming with AR glasses and the P30.

Figure 9: Using AR glasses for entertainment with the P30.
10. Warranty and Support
Lemorele products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Lemorele website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.