WYMECT RC4875, RC4870, RC4849

RC4875 RC4870 RC4849 TV Remote Control User Manual

Model: RC4875, RC4870, RC4849 | Brand: WYMECT

1. Introduction

This manual provides instructions for the use and maintenance of your new WYMECT RC4875, RC4870, RC4849 TV Remote Control. This remote is designed as a replacement or universal remote for various TV brands, including JVC, VESTEL, SELECLINE, HITACHI, TECHWOOD, Telefunken, Finlux, and specific models like TE32182B301C10 and 32272HDDVDL. It operates using Infrared (IR) wireless communication.

Front view of the RC4875 RC4870 RC4849 TV Remote Control, showing all buttons clearly.

Figure 1: Front view of the remote control with button layout.

2. Setup

2.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards or press the latch and lift to open.
  3. Insert two AAA batteries (not included) into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside.
  4. Replace the battery compartment cover by sliding it back into place until it clicks securely.
Back view of the remote control with the battery compartment open, showing slots for two AAA batteries.

Figure 2: Battery compartment with cover removed.

2.2 Initial Use

This remote control is designed to be ready for use with compatible TV models immediately after battery installation. No programming or pairing is typically required. Simply point the remote at your TV and begin using it.

3. Operating Instructions

The remote control features standard TV functions. Below is a general guide to common buttons:

  • Power Button (Red Circle): Turns the TV on or off.
  • Number Buttons (0-9): Directly select channels.
  • Volume Up/Down (V+/V-): Adjusts the sound volume.
  • Channel Up/Down (P+/P-): Changes the TV channel.
  • Mute Button (Muted Speaker Icon): Mutes or unmutes the TV sound.
  • Menu Button: Accesses the TV's main menu.
  • OK Button: Confirms selections within menus.
  • Directional Arrows (Up, Down, Left, Right): Navigate through menus and options.
  • Back Button: Returns to the previous screen or menu.
  • Exit Button: Exits the current menu or function.
  • Colored Buttons (Red, Green, Yellow, Blue): These buttons often have specific functions depending on the TV model or current application (e.g., teletext, smart TV features).
  • Input/Source Button: Changes the input source (HDMI, AV, etc.).
Angled front view of the remote control, highlighting the various functional buttons.

Figure 3: Detailed view of remote control buttons.

4. Maintenance

4.1 Cleaning

To clean your remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or immerse the remote in water.

4.2 Battery Replacement

Replace batteries when the remote control's range decreases or it stops responding. Always replace both batteries at the same time with new AAA batteries. Do not mix old and new batteries or different types of batteries.

5. Troubleshooting

  • Remote not working:
    • Check if the batteries are inserted correctly with the correct polarity.
    • Replace old batteries with new ones.
    • Ensure there are no obstructions between the remote control and the TV's IR sensor.
    • Make sure you are within the effective range of the TV's IR receiver.
  • Certain buttons not responding:
    • This may indicate a specific compatibility issue with your TV model for that particular function. While designed for broad compatibility, some advanced or brand-specific functions may not be fully supported.
    • Clean the remote control, especially around the unresponsive buttons, to ensure no debris is interfering with their operation.

6. Specifications

FeatureSpecification
Model NumbersRC4875, RC4870, RC4849
BrandWYMECT
Wireless CommunicationIR (Infrared)
UseTV
Channel1
OriginMainland China
Package Weight0.07 kg
Package Dimensions8 cm x 8 cm x 8 cm

7. User Tips

  • Broad Compatibility: This remote has been reported to work with a wide range of TV brands, including those not explicitly listed, such as Kunft televisions. If your TV is not listed, it may still be compatible.
  • Line of Sight: As an IR remote, ensure a clear line of sight between the remote's emitter and your TV's IR receiver for optimal performance.
  • Battery Quality: Using high-quality alkaline batteries can extend the remote's operational life and improve signal strength.

8. Warranty and Support

For any issues or support inquiries regarding your remote control, please contact the seller directly. The product typically includes a policy for free returns within 90 days and provisions for refunds in cases of delayed delivery, lost packages, or damaged items, ensuring customer satisfaction.

Documents - WYMECT – RC4875,RC4870,RC4849

no relevant documents