1. Product Overview
The SKMEI 2025 is a versatile sport watch featuring both analog and digital time displays, designed for durability and functionality. It includes multiple features such as a stopwatch, alarm, backlight, and water resistance, making it suitable for various activities.
Key Features:
- Dual Time Display (Analog & Digital)
- Back Light for low-light conditions
- Shock Resistant construction
- Automatic Date and Week Display
- Chronograph (Stopwatch) function
- Alarm function
- Water Resistance up to 3 Bar (30 meters)
- 12/24 Hour format selection
Figure 1: Watch Feature Set and Button Functions
Button Functions:
- LIGHT Button: Activates the backlight for the digital display.
- MODE Button: Cycles through different modes (Time, Chronograph, Alarm).
- RESET Button: Used for setting values in various modes (e.g., resetting stopwatch, adjusting time/date).
- Crown: Used to set the analog time.
2. Setup Instructions
2.1 Setting Analog Time
- Pull the crown (located on the right side of the watch) outwards.
- Rotate the crown to adjust the analog hour and minute hands to the desired time.
- Push the crown back in to secure the analog time setting.
2.2 Setting Digital Time and Date
- Press the MODE button repeatedly until the digital display shows the time setting mode (usually indicated by flashing digits).
- Use the RESET button to cycle through the adjustable parameters (seconds, minutes, hours, 12/24 hour format, month, date, day of week).
- While a parameter is flashing, use the LIGHT button to increase the value.
- Once all parameters are set, press the MODE button to exit the setting mode.
2.3 Setting the Alarm
- Press the MODE button until you reach the Alarm mode (indicated by 'AL' or an alarm icon).
- Press the RESET button to select the hour or minute to adjust (flashing).
- Use the LIGHT button to set the desired alarm hour and minute.
- Press the MODE button to exit the alarm setting.
- To turn the alarm ON/OFF, in Alarm mode, press the LIGHT button. An alarm icon will appear/disappear to indicate its status.
3. Operating Instructions
3.1 Using the Backlight
Press the LIGHT button at any time to illuminate the digital display for a few seconds.
3.2 Using the Stopwatch (Chronograph)
- Press the MODE button until you reach the Stopwatch mode (indicated by 'ST' or 'CHRONO').
- Press the LIGHT button to start the stopwatch.
- Press the LIGHT button again to pause the stopwatch.
- Press the LIGHT button to resume.
- To reset the stopwatch to zero, press the RESET button while the stopwatch is paused.
3.3 Switching 12/24 Hour Format
In the normal time display mode, press the RESET button to toggle between 12-hour (with AM/PM indicator) and 24-hour formats.
Figure 2: Functional Overview of the Watch
4. Maintenance
4.1 Water Resistance
This watch is rated for 3 Bar (30 meters) water resistance. This means it is suitable for daily use, such as splashes, rain, and hand washing. It is NOT suitable for showering with hot water, bathing, swimming, or diving. Avoid pressing buttons underwater as this can compromise the water seal.
Figure 3: Water Resistance Guidelines
4.2 General Care
- Clean the watch regularly with a soft, dry cloth.
- Avoid exposing the watch to extreme temperatures (hot or cold), strong magnetic fields, or harsh chemicals.
- Store the watch in a dry place when not in use.
4.3 Battery Replacement
When the display becomes dim or functions stop working, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
5. Troubleshooting
- Digital Display is Blank: The battery may be depleted. Replace the battery.
- Analog Hands Not Moving: Check if the crown is pushed in completely. If the issue persists, the battery may be low or the movement may require service.
- Time is Inaccurate: Re-set both the analog and digital times as per the setup instructions. Ensure the crown is fully pushed in.
- Buttons Not Responding: Ensure the watch is not in a locked mode (if applicable, though not a feature of this model). A low battery can also affect button responsiveness.
6. Specifications
Figure 4: Product Parameters
| Attribute | Detail |
|---|---|
| Brand Name | Skmei |
| Model Number | SKMEI 2025 |
| Movement | Digital |
| Display Type | Digital |
| Case Material | Alloy (Zinc Alloy) |
| Case Shape | Irregular Shape |
| Dial Window Material Type | Glass |
| Band Material Type | Stainless steel |
| Clasp Type | Folding Clasp with Safety |
| Water Resistance Depth | 3Bar (30M) |
| Case Thickness | 13.9mm |
| Dial Diameter | 48.1mm |
| Band Width | 24mm |
| Band Length | 21cm (210mm) |
| Weight | 158.6g |
| Features | Stop Watch, Back Light, Shock Resistant, Auto Date, Chronograph, Complete Calendar, Water-Resistance, Alarm, Week Display, 2 Time, 12/24 Hour Clock |
7. User Tips
- Dimensions: For precise measurements of the watch, refer to the 'Specifications' section and Figure 4.
- Water Exposure: While water-resistant, avoid prolonged exposure to water, especially hot water or steam, as this can damage the seals. Do not press buttons when the watch is wet or submerged.
- Cleaning: Use a soft, lint-free cloth to wipe the watch clean. For the metal band, a slightly damp cloth can be used, followed by immediate drying.
- Analog Time Drift: If the analog time consistently drifts, ensure the crown is fully pushed in after setting. If the issue persists, it might indicate a need for battery replacement or service.
8. Warranty and Support
Your SKMEI 2025 watch is manufactured to high-quality standards. For any issues or concerns not covered in this manual, please contact the retailer or an authorized service center for assistance. Keep your purchase receipt as proof of purchase.