SKMEI 1257 Digital Sport Watch

Introduction

Thank you for choosing the SKMEI 1257 Digital Sport Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read it carefully to ensure proper use and to enjoy all the features your watch has to offer.

The SKMEI 1257 Digital Sport Watch in black.

Specifications

Basic dimensions and material information for the SKMEI 1257 watch.

Button Functions

Your SKMEI 1257 watch features four buttons for various operations:

Diagram of watch buttons and their corresponding functions.

• LIGHT Button (Top Left): Activates the EL backlight for visibility in low light conditions.
• MODE Button (Bottom Left): Cycles through different display modes (Time, Chronograph, Alarm, Countdown, Dual Time).
• START/STOP Button (Top Right): Used to start/stop functions like Chronograph or adjust settings in setting mode.
• RESET Button (Bottom Right): Used to reset functions like Chronograph or confirm settings in setting mode.

Setup: Setting Time and Date

1. From the normal time display, press the MODE button repeatedly until you enter the Time Setting mode (usually indicated by flashing digits).
2. Use the START/STOP button to adjust the flashing digit (e.g., seconds, hours, minutes).
3. Press the RESET button to move to the next digit or setting (e.g., from seconds to hours, then minutes, then year, month, day).
4. Repeat steps 2 and 3 until all time and date settings are correct.
5. Once finished, press the MODE button to exit the setting mode and return to the normal time display.

Operating Instructions

1. EL Backlight

To illuminate the display in dark conditions, press the LIGHT button (top left). The backlight will stay on for a few seconds.

Normal display mode versus EL light display mode for enhanced visibility.

2. Chronograph (Stopwatch)

1. Press the MODE button until 'CHRONO' or 'STW' appears on the display.
2. Press START/STOP to begin timing.
3. Press START/STOP again to pause timing.
4. Press RESET to clear the stopwatch to zero.
5. To resume timing after pausing, press START/STOP.

3. Alarm Setting

1. Press the MODE button until 'ALARM' or 'ALM' appears.
2. Press START/STOP to select the hour digit (it will flash). Use RESET to adjust the hour.
3. Press START/STOP again to select the minute digit. Use RESET to adjust the minutes.
4. Press MODE to exit alarm setting.
5. To turn the alarm ON/OFF, in alarm mode, press RESET. An alarm icon will appear/disappear.

4. Countdown Timer

1. Press the MODE button until 'COUNTDOWN' or 'TMR' appears.
2. Press START/STOP to select the hour digit (it will flash). Use RESET to adjust the hour.
3. Press START/STOP again to select the minute digit. Use RESET to adjust the minutes.
4. Press START/STOP to begin the countdown.
5. Press START/STOP again to pause/resume.
6. Press RESET to stop and reset the timer.

5. Dual Time

This feature allows you to set a second time zone. Press the MODE button until 'DUAL TIME' or 'DT' appears. Follow similar steps as setting the main time to adjust the dual time.

6. 12/24 Hour Format

In normal time display mode, press the RESET button to toggle between 12-hour and 24-hour formats.

Water Resistance

The SKMEI 1257 watch is rated for 50 meters (5Bar) water resistance. This means it is suitable for daily use, including washing hands, being in the rain, and swimming. It is not recommended for hot water activities like showering with hot water or diving, as steam and pressure changes can compromise the seals.

The watch is designed to be 50M waterproof, suitable for swimming.

Visual guide for water resistance: suitable for washing hands, rain, and swimming.

Maintenance

• Cleaning: Wipe the watch regularly with a soft, dry cloth to remove dirt and sweat. For silicone bands, a mild soap and water solution can be used, then rinse thoroughly and dry.
• Avoid Chemicals: Keep the watch away from solvents, detergents, perfumes, and cosmetics, as these can damage the case, band, or seals.
• Temperature Extremes: Avoid exposing the watch to extreme hot or cold temperatures, as this can affect battery life and accuracy.
• Water Resistance: Do not operate buttons while the watch is submerged in water to prevent water ingress. Ensure the watch is completely dry before pressing buttons after water exposure.
• Battery Replacement: When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have this done by a professional watch repair service to ensure the water resistance seal is properly maintained.

Troubleshooting

• Blank Display: If the display is blank, the battery may be depleted. Replace the battery.
• Buttons Not Responding: Ensure the watch is not in a locked mode (if applicable, though this model does not specify one). Try pressing all buttons firmly. If unresponsive, a battery issue or internal fault may be present.
• Inaccurate Time: Re-set the time according to the 'Setup' section. If the time continues to be inaccurate, the battery may be low, or the watch may require servicing.
• Water Inside Display: If condensation or water appears inside the watch, stop using it immediately and have it inspected by a professional. This indicates a compromised water seal.

User Tips

• The EL backlight is very useful in dark environments. A quick press of the LIGHT button will illuminate the display.
• Utilize the dual time function when traveling or communicating with people in different time zones.
• Remember to press the START/STOP button to pause the chronograph before pressing RESET to clear it, otherwise, you might accidentally stop and then immediately reset without seeing the final time.
• While the watch is 50M water resistant, avoid pressing buttons underwater to maintain the integrity of the seals.

Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.