Aigo L12

Contents

Aigo L12 ARGB PWM PC Fan Instruction Manual

Model: L12

1. Introduction

The Aigo L12 ARGB PWM PC Fan is designed to provide efficient cooling and vibrant customizable lighting for your computer case or radiator. Featuring a wireless harness connection for easy installation and a hydraulic bearing for quiet operation, this fan is suitable for high-end gaming setups and general PC cooling needs. It supports Addressable RGB (ARGB) synchronization with popular motherboard software like ASUS Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion, allowing for 16 million color customization options.

2. Key Features

  • Wireless Splicing Design: Innovative wire-free connection between fans for a clean and easy installation.
  • Addressable RGB (ARGB) Lighting: 16 million colors with support for motherboard synchronization (ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion).
  • PWM Temperature Control: Automatically adjusts fan speed (500-1500 RPM) based on temperature for optimal cooling and noise reduction.
  • Hydraulic Bearing: Ensures quiet and steady operation with an extended lifespan of up to 100,000 hours.
  • Optional Fan Blade Versions: Available in 'Positive leaf' and 'Anti-leaf' versions to cater to different airflow directions (intake or exhaust).
  • Shock-Absorbing Design: Equipped with silicone foot pads to minimize vibration and noise.
  • Infinite Space Design: Features a side layer mirror light effect for enhanced aesthetic appeal.

3. Specifications

FeatureSpecification
Model NumberL12
Dimensions120 x 120 x 25 mm
Weight180g
Fan Speed500-1500 (±20%) RPM
Noise Level23.8-36.8 dBA
Air Volume19.2-61.7 CFM
Fan Pressure0.27-1.15 mmH2O
Bearing TypeHydraulic Bearing / Fluid Bearing
Fan Life100,000 hours
Current (Fan)0.16A
Voltage (Fan)12V
Voltage (LED)5V
Rated Power (Total)4.2W
Power InterfaceARGB 3PIN, PWM 4PIN
Used ForCase, Radiator
CertificationsCE, FCC
Blade Quantity9

Note: Specifications are subject to change without prior notice.

Aigo YOGO L12 Product Information Table
Figure 3.1: Detailed product information for Aigo YOGO L12.

4. Package Contents

Please check the package for the following items:

  • Aigo L12 ARGB PWM Fan(s) (quantity may vary based on kit purchased)
  • PWM Female to Female switch cable
  • ARGB signal synchronizing cable
  • Adhesive Gum
  • Remote controller (if included in kit)
  • Controller Hub (if included in kit)
Aigo L12 Controller Hub and Cables
Figure 4.1: Controller hub, remote, and cables included with certain kits.

5. Installation Guide

Before installation, ensure your computer is powered off and unplugged from the wall outlet.

5.1 Fan Orientation

The Aigo L12 fans come in 'Positive leaf' and 'Anti-leaf' versions to optimize airflow for different mounting positions (intake or exhaust). Choose the appropriate version based on your cooling needs.

Positive Leaf Version Airflow Diagram
Figure 5.1: Positive leaf version airflow (air flows into the fan, out the back).
Fan Blade Optional Positive and Negative Airflow
Figure 5.2: Comparison of positive and anti-leaf fan versions for different airflow directions.

5.2 Connecting Fans (Wireless Splicing)

The Aigo L12 fans feature a unique wireless splicing design for easy interconnection:

  1. Align the 'Electrical + luminescent two-in-one magic interface' on the side of one fan with the corresponding interface on another fan.
  2. Gently push the fans together until they click into place, ensuring a secure connection.
  3. Repeat for additional fans to create a chain.
Wireless Splicing Interface Diagram
Figure 5.3: Diagram illustrating the 'Electrical + luminescent two-in-one magic interface' for fan interconnection.
Wire-free Splicing Installation
Figure 5.4: Visual guide for wire-free splicing of fans.

5.3 Connecting to Motherboard/Controller

After splicing the fans, connect the first fan in the chain to your motherboard or the included controller hub.

  1. PWM Connection: Connect the 4-pin PWM cable from the first fan (or controller hub) to a 4-pin PWM fan header on your motherboard. This allows for fan speed control.
  2. ARGB Connection: Connect the 3-pin ARGB cable from the first fan (or controller hub) to a 3-pin 5V ARGB header on your motherboard. This enables software control of the RGB lighting.
  3. Controller Hub (if applicable): If your motherboard lacks a 3-pin 5V ARGB header or you prefer remote control, connect the fans to the provided controller hub. The controller hub will then connect to your power supply and optionally to a motherboard USB header for software control (check controller manual for specific connections).
Motherboard ARGB Connection Diagram
Figure 5.5: Example of ARGB connection to a motherboard header.
Standard Adapter Cable for Series Application
Figure 5.6: Standard adapter cable for direct or partitioned series application.

6. Operation

6.1 Fan Speed Control (PWM)

The fans utilize PWM (Pulse Width Modulation) for automatic speed control. If connected to a compatible motherboard header, the fan speed will adjust automatically based on your system's temperature, ensuring optimal cooling performance while minimizing noise.

Temperature Control Features
Figure 6.1: Temperature control features including shock pads and PWM.

6.2 ARGB Lighting Control

There are two primary methods for controlling the ARGB lighting:

  1. Motherboard Software Synchronization: If your motherboard has a 3-pin 5V ARGB header and compatible software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion), you can control the fan lighting directly through your motherboard's utility.
  2. Remote Control (with Controller Hub): If you are using the optional controller hub, you can use the included remote control to change lighting modes, colors, and effects.
16 Million Colors ARGB Support
Figure 6.2: Fans showcasing 16 million ARGB colors and motherboard sync compatibility.
Infinite Space Design Lighting
Figure 6.3: Fan with infinite space design and side lighting effect.
Video 6.1: Demonstration of Aigo L12 ARGB PWM fan lighting effects and installation process.

7. Maintenance

To ensure optimal performance and longevity of your Aigo L12 fans, follow these maintenance guidelines:

  • Regular Cleaning: Periodically clean the fan blades and frame to remove dust accumulation. Use compressed air or a soft, dry cloth. Ensure the computer is powered off before cleaning.
  • Avoid Obstructions: Ensure that no cables or other components obstruct the fan blades or airflow pathways.
  • Check Connections: Occasionally verify that all power and ARGB connections are secure.

8. Troubleshooting

8.1 Fan Not Spinning

  • Check if the 4-pin PWM cable is securely connected to the motherboard or controller.
  • Ensure the power supply is providing adequate power to the fan(s) or controller.
  • Verify that the fans are correctly spliced together via the wireless interface.

8.2 RGB Lighting Not Working

  • Confirm the 3-pin ARGB cable is properly connected to a 5V ARGB header on your motherboard or the controller. Note: Do NOT connect to a 12V RGB header, as this can damage the LEDs.
  • If using motherboard software, ensure the software is installed and configured correctly.
  • If using a remote control, check if the battery is functional and properly inserted.
  • Ensure all fans in the chain are correctly spliced for ARGB signal transmission.

8.3 Excessive Noise

  • Check for any obstructions (cables, debris) hitting the fan blades.
  • Ensure the fans are securely mounted and the shock-absorbing silicone pads are in place.
  • Verify that the fan speed is not set to maximum unnecessarily; PWM control should manage this automatically.

9. User Tips

  • For optimal cooling, plan your airflow direction carefully. Use 'Positive leaf' fans for intake and 'Anti-leaf' fans for exhaust, or vice-versa, depending on your case design.
  • When connecting multiple fans, ensure the first fan in the chain is properly connected to the motherboard or controller for both power and ARGB signals.
  • If using a controller hub, remember that the remote control battery (button battery) might not be included due to shipping regulations. Have a spare battery ready if needed.

10. Warranty and Support

For warranty information and technical support, please refer to the official Aigo website or contact your retailer. Keep your proof of purchase for any warranty claims.

Aigo Brand Information and Certifications
Figure 10.1: Aigo brand information and product certifications (ROHS, CE, FCC).

© 2024 Aigo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.