SVBONY SV208

Contents

SVBONY SV208 8x50 Astronomical Telescope Finder Scope

Model: SV208

1. Introduction

The SVBONY SV208 8x50 straight-through Illuminated finderscope is designed to enhance your astronomical observations. It generates images that are right-side-up and left-to-right correct, simplifying the process of locating celestial objects. The finderscope features an open center reticle for precise object centering and an adjustable LED illuminator for optimal brightness. The eyepieces offer a comfortable exit pupil angle, and the adjustable LED lighting unit is powered by two LR754 coin cells. Both the main lens and crosshairs can be focused independently to achieve perfect focus for your eyes.

Video: SVBONY SV208 Illuminated Finder Scope product overview and features demonstration.

2. Safety Tips

  • Never look directly at the sun: Do not look directly at the sun with the naked eye or through a finderscope (unless you already have the proper solar filter). This will cause permanent and irreparable damage to your eyes.
  • Avoid solar projection: Never use a finderscope to project the sun onto any surface. Heat build-up inside can damage the structure and optics.
  • Supervise use: At no time should the finderscope be left unattended or given to children and adults who are unfamiliar with proper operation.
  • Battery replacement: To replace the battery, disassemble the lighting device and replace the battery in the same way. Make sure the batteries are installed with the correct polarity.
  • Plastic packaging: Do not leave plastic packaging within reach of children to prevent suffocation.

3. Structure Description

The SV208 finderscope consists of several key components:

  1. Objective Lens: The front lens that gathers light from the celestial object.
  2. Objective Focus: Mechanism to adjust the focus of the objective lens.
  3. Finder Adjustment Screws: Six thumbscrews for precise alignment and focusing.
  4. Dovetail Bracket: The mounting base for attaching the finderscope to a telescope.
  5. Illumination Unit: Contains the LED for the illuminated reticle.
  6. Eyepiece Focus: Mechanism to adjust the focus of the eyepiece.
  7. Eyecap: Protects the eyepiece.
  8. Eyepiece: The lens through which you view the image.
Labeled diagram of SVBONY SV208 finder scope components

Image: Exploded view showing the objective lens, focuser, thumbscrews, LED illumination, eyepiece focuser, eyecap, eyepiece, and Vixen-shaped mounting base.

4. Installation Guide

4.1. Setting up the Finder Scope with Finder Bracket

  1. Attach the finder scope to the finder bracket using the adjustment screws. Ensure it is securely fastened.
  2. Mount the finder bracket onto your telescope's dovetail plate. The mounting bracket fits standard dovetail plates from brands like Vixen, Synta, Celestron, Skywatcher, GSO, and many other 75-degree dovetail plates.
Installation steps for mounting the finder scope with its bracket

Image: Visual guide for attaching the finder scope to its bracket and then to the telescope.

Diagram of applicable dovetail plate

Image: Illustration of the dovetail plate compatibility.

4.2. Aligning the Finder Scope

To ensure accurate targeting, the finder scope must be aligned with your main telescope:

  1. Point your main telescope at a distant, easily identifiable object (e.g., a distant tree or building during the day). Center this object in the main telescope's eyepiece.
  2. Look through the finder scope. Use the six thumbscrews on the finder bracket to adjust the finder scope's position until the same object is centered in the finder scope's crosshairs.
  3. Once aligned, tighten all thumbscrews to secure the finder scope's position.
Diagram showing how to center the target using thumbscrews

Image: Guide on using the six thumbscrews for precise aiming to center the target.

5. Operating Instructions

5.1. Focusing the Finder Scope

The SV208 allows for independent focusing of the eyepiece and objective lens:

  1. Eyepiece Focus: While looking through the finder scope, turn the rim of the finder scope's eyepiece to the left or right by hand to bring the crosshairs reticle into sharp focus.
  2. Objective Lens Focus: While holding the lock ring next to the objective lens cell, turn the objective lens cell so that it loosens. Find a position of the objective lens cell that brings a distant view into focus. Once the distant view is sharp, tighten the objective lens cell with the lock ring at that position.

5.2. Adjusting the Illuminated Reticle

The deep red illumination of the cross-hair is continuously variable:

  1. Locate the LED illumination unit. Turn the LED lighting switch to adjust the brightness to your desired level.
  2. Cross-hair Angle Adjustment: If the cross-hair appears at the wrong angle after initial alignment, loosen the knob and rotate the front part of the scope to correct the reticle angle without adjusting the entire finder scope.
Illustration of adjustable brightness LED cross-hair

Image: Demonstrates the adjustable brightness of the LED cross-hair, showing ON and OFF states.

Diagram for separately adjusting the cross-hair angle

Image: Visual guide for adjusting the cross-hair angle independently.

6. Maintenance

6.1. Care and Cleaning

The SV208 finderscope requires minimal routine maintenance, primarily ensuring that the objective lenses and eyepieces are kept clean. Dirty optics can lead to reduced light transmission, loss of brightness, and unsharp images.

  • Storage: Store the product in a ventilated, dry, clean place or in a dry box when not in use.
  • Lens Cleaning: If dust or dirt is present on the optical lens, use a professional cleaning kit. Do not wipe directly with a cloth or a hard brush.

6.2. Usage Notice

  • Disassembly: Do not disassemble or repair the product yourself. If repair is needed, contact professional after-sales support.
  • Environmental Use: Do not use non-waterproof products in wet environments. If using waterproof products in wet environments, dry them thoroughly after use.
  • Indoor Viewing: When viewing indoors, avoid closing the window or viewing through the window, as this can reduce the observation effect.
  • Eye Strain: Regardless of the technique used, do not stare continuously at the sun. Take breaks and rest your eyes!

7. Troubleshooting

  • Unclear Image: If the image appears blurry, ensure both the eyepiece and objective lens are properly focused. Also, check if the lenses are clean and free from dust or smudges.
  • Reticle Not Illuminating: Check the LR754 button cells. Ensure they are correctly installed with the right polarity and are not depleted. Replace if necessary.
  • Difficulty Aligning: Make sure the finder scope is securely mounted and all six adjustment screws are accessible. Start with a bright, distant object for initial alignment.

8. Specifications

FeatureSpecification
BrandSVBONY
Model NumberSV208
Lens Diameter50 mm
Focal Length185 mm
Magnification8x
Eye Relief21 mm
Exit Pupil6.25 mm
Field of View7.3°
Lens CoatingFMC (Fully Multi-coated)
Viewing AngleStraight-Through
Image OrientationCorrect-image
CrosshairOptical Reticle
ObjectiveAchromatic 2-Element
Angle AdjustmentYes
IlluminatedYes
Adjustable FocusYes
Net Weight632.5g / 1.395lb / 22.31oz
Power Supply2x LR754 Button Cell
Table of SVBONY SV208 specifications

Image: Detailed specifications table for the SV208 finder scope.

Diagram showing LR754 battery installation

Image: Diagram illustrating the power supply and LR754 cell battery installation.

9. Warranty & Support

9.1. Guarantee Information

Most new SVBONY products come with a one-year manufacturer's warranty from the date of purchase. For warranty service, you will need to provide proof of purchase from the original seller.

Exclusions from Warranty Coverage:

  • Damage caused by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • Products with altered, defaced, or removed serial numbers.

9.2. Authorized Accessories & Support

Authorized accessories meet regulatory standards when used with SVBONY-supplied or designated products. For a list of approved accessories and further support, please visit the official SVBONY website: http://www.Svbony.com

For any repair needs, please contact SVBONY's professional after-sales department.

A PDF version of this user manual is available for download: SVBONY SV208 User Manual (PDF)

© 2023 SVBONY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.