1. Introduction
The ANDELI CUT-55Y is a versatile 2-in-1 machine combining plasma cutting and MMA (Manual Metal Arc) welding functionalities. Designed for efficiency and ease of use, it features a built-in air pump, eliminating the need for an external air compressor for many applications. This machine supports both HF (High Frequency) and Non-HF (Pilot Arc) cutting modes, enabling precise non-contact cutting of various metals up to 25mm (0.98 inch) thick. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your ANDELI CUT-55Y.
2. Safety Instructions
Always prioritize safety when operating welding and cutting equipment. Failure to follow these instructions can result in serious injury or death.
- Personal Protective Equipment (PPE): Always wear appropriate PPE, including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
- Ventilation: Ensure adequate ventilation to remove fumes and gases produced during cutting and welding.
- Fire Hazards: Keep a fire extinguisher nearby. Remove all flammable materials from the work area. Sparks and hot metal can travel a significant distance.
- Electrical Safety: Ensure the machine is properly grounded. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
- Arc Rays: Arc rays can burn eyes and skin. Protect yourself and bystanders.
- Electromagnetic Fields (EMF): Welding and cutting operations generate EMF. Consult a physician if you have a pacemaker or other medical implant.
- Gas Cylinders: If using external gas, handle cylinders with care, secure them properly, and ensure connections are leak-free.
- Children and Bystanders: Keep children and unauthorized personnel away from the work area.
3. Product Overview
3.1 Machine Components

The CUT-55Y integrates a powerful plasma cutter and MMA welder into a compact unit. Key features include:
- Built-in Air Compressor: For convenience, eliminating the need for an external air supply for standard cutting tasks.
- Dual Cutting Modes: HF (High Frequency) and Non-HF (Pilot Arc) for versatile cutting.
- MMA Welding: Capable of Manual Metal Arc welding.
- LED Large Screen Display: Provides clear visibility of functions, cutting thickness, and adjustable parameters.
- Unique Arc Feedback Technology: Detects nozzle wear and prompts replacement to prolong torch service life.

3.2 Control Panel

- GAS Select Button: Toggles between Internal gas, External gas, or VRD (Voltage Reduction Device) in MMA mode.
- Select Button: Used to choose between Grid, 2T (Two-Touch), or 4T (Four-Touch) modes in CUT operation.
- GAS Time Select Button: Adjusts Pre-flow time (1-10S) and Post-flow time (5-15S) in CUT mode.
- Gas Check Button: Initiates a gas flow check.
- Function Selection Button: Selects between HF CUT, LIFT CUT, or MMA modes.
- MMA mode Function Button: Adjusts HOT START (0-10%) and ARC FORCE (0-10%) in MMA mode, and MMA mode ARC time.
- Knob Gear: Used to adjust parameters such as Gas time, Cutting Current, HOT START Current, and ARC FORCE Current.
3.3 Included Accessories
- Plasma Torch (4M)
- Ground Clamp
- Nozzles (20 PCS)
- Electrodes (20 PCS)
4. Setup
Before operating the machine, ensure it is placed on a stable, level surface and connected to the appropriate power supply.
- Power Connection: Connect the machine to a 220V AC power source. Ensure the power outlet is properly grounded and capable of handling the machine's input current.
- Ground Clamp Connection: Attach the ground clamp securely to the workpiece. A good ground connection is crucial for safe and effective operation.
- Torch Connection: Connect the appropriate torch (plasma cutting torch or MMA electrode holder) to the corresponding terminals on the front panel. Refer to Figure 4 for visual guidance.

Figure 4: Machine interface for HF and LF torch connections. The machine automatically switches to the correct interface based on the connected torch. - Air Supply (if external): If cutting thicker materials requiring more air than the built-in compressor can provide, connect an external air compressor to the designated inlet. Ensure the external compressor is capable of delivering the required pressure and flow rate.

Figure 5: Illustration of connecting an external air compressor to cut thicker materials.
5. Operating Instructions
5.1 Powering On and Mode Selection
- Turn on the main power switch located on the rear of the machine.
- Use the Function Selection Button (5 on Figure 3) to select your desired operation mode: HF CUT, LIFT CUT, or MMA.
- For cutting, use the Select Button (2 on Figure 3) to choose between Grid, 2T, or 4T modes.
5.2 Parameter Adjustment
Use the Knob Gear (7 on Figure 3) and corresponding function buttons to adjust parameters:
- Cutting Current: Adjust for desired cutting power.
- Gas Time: Adjust Pre-flow and Post-flow times for optimal cutting performance (using GAS Time Select Button, 3 on Figure 3).
- MMA Mode Parameters: Adjust HOT START Current (0-10%) and ARC FORCE Current (0-10%) using the MMA mode Function Button (6 on Figure 3).
5.3 Plasma Cutting Operation
The CUT-55Y supports both HF (High Frequency) and Non-HF (Pilot Arc) cutting. Non-HF cutting allows for non-contact starts and is generally preferred for cutting painted or rusty metals.

- Select the appropriate cutting mode (HF CUT or LIFT CUT) and adjust the cutting current based on the material type and thickness.
- Ensure the workpiece is properly grounded.
- Position the torch nozzle at the starting point of the cut. For Non-HF (Pilot Arc), a slight distance from the workpiece is maintained.
- Initiate the arc and proceed with the cut, maintaining a steady travel speed.
5.4 MMA Welding Operation

- Select MMA mode using the Function Selection Button.
- Connect the electrode holder and ground clamp.
- Insert the appropriate electrode into the holder.
- Adjust the welding current, HOT START, and ARC FORCE parameters as needed for the electrode type and material.
- Strike the arc and begin welding, maintaining proper arc length and travel speed.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your CUT-55Y machine.
- Nozzle and Electrode Replacement: The machine features Unique Arc Feedback Technology that prompts you when the nozzle needs changing. Replace worn nozzles and electrodes promptly to maintain cutting quality and prolong torch life.

Figure 8: Unique Arc Feedback Technology intelligently detects nozzle wear and prompts replacement when flashing, extending torch service life. - Cleaning: Regularly clean the machine's exterior and ventilation openings to prevent dust and debris buildup, which can hinder cooling and performance. Use dry, compressed air to gently clear internal components if accessible.
- Cable Inspection: Periodically inspect all cables, hoses, and connections for signs of wear, cuts, or damage. Replace any damaged components immediately.
- Air Filter: If applicable, check and clean or replace the air filter for the built-in compressor to ensure optimal air quality and flow.
- Storage: Store the machine in a clean, dry environment when not in use.
7. Troubleshooting
This section addresses common issues you might encounter. For problems not listed here, contact customer support.
- No Power: Check the power cord connection, main power switch, and circuit breaker. Ensure the input voltage is 220V.
- No Arc/Weak Arc (Cutting):
- Ensure the ground clamp is securely attached to the workpiece and has good electrical contact.
- Check for worn or damaged nozzles and electrodes; replace if necessary.
- Verify air pressure and flow are adequate.
- Adjust cutting current settings.
- Poor Cut Quality:
- Check for worn consumables (nozzle, electrode).
- Adjust cutting speed and current.
- Ensure proper standoff distance from the workpiece.
- Machine Overheating: Allow the machine to cool down. Ensure ventilation openings are clear and the duty cycle is not exceeded.
- MMA Arc Instability:
- Check electrode type and condition.
- Adjust welding current, HOT START, and ARC FORCE settings.
- Ensure good ground connection.
8. Specifications

| Parameter | CUT Mode | MMA Mode |
|---|---|---|
| Model Number | CUT-55Y | |
| Input Voltage (V) | AC220V±15% | |
| Rated Input Capacity (KVA) | 7.0 | 8.4 |
| Rate Input Current (A) | 32 | 29 |
| No-load Voltage (V) | 310 | 88 |
| Current Range (A) | 20-40 | 30-140 |
| Rate Output Voltage (V) | 88/96 | 21.2/25.6 |
| Duty Cycle (40℃, 10min) | 60% 30A / 100% 23A | 60% 90A / 100% 70A |
| Efficiency (%) | 79 | 80 |
| Power Factor | 0.76 | 0.7 |
| Insulation Class | H | |
| Protection Class | IP21S | |
| Machine Dimensions (mm) | 484*177*292 | |
| Weight (kg) | 13.5KG±0.2KG | |
| Origin | Mainland China | |
| Certification | CE | |
| Is Smart Device | No | |
| High-concerned Chemical | None | |
9. User Tips
While specific user reviews or Q&A were not provided, general tips for plasma cutters and welders often include:
- Practice on Scrap Material: Before working on your main project, practice on similar scrap material to fine-tune your settings and technique.
- Consumable Life: Keep spare nozzles and electrodes on hand. Replacing them proactively can prevent poor cut quality and extend torch life.
- Cleanliness: Ensure your workpiece is clean and free of rust, paint, or oil for the best cutting and welding results.
- Air Quality: Even with a built-in compressor, ensuring the air intake is clear and the internal filter (if accessible) is clean can improve performance.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the ANDELI Official Store or your authorized dealer. Keep your purchase receipt and product serial number handy when contacting support.