JIKONG JKBMS V19

Contents

JIKONG JKBMS V19 User Manual

Smart Battery Management System for LiFePo4, Li-Ion, LTO Batteries

1. Product Overview

The JIKONG JKBMS V19 is an intelligent protection board designed for large-capacity series lithium battery packs. It offers comprehensive management features including voltage acquisition, high-current active balancing, overcharge/over-discharge/overcurrent/over-temperature protection, coulomb metering, Bluetooth communication, and PC monitoring.

This BMS is suitable for various battery types such as Lithium Iron Phosphate (LiFePo4), Ternary Lithium (Li-Ion), and Lithium Titanate (LTO) batteries. It is ideal for high-power energy storage, base station backup power supplies, and solar power station battery packs.

Video: JIKONG BMS product overview and features.

1.1. Functional Characteristics

  • LED Bluetooth status indicator
  • APP Bluetooth remote operation (Android/iOS/HarmonyOS support)
  • Battery capacity calculation
  • Supports PC operations
  • High precision voltage acquisition (±3mV)
  • High precision current acquisition
  • Support information screen display
  • Accurate time logging
  • Support RS485 communication
  • Support CAN communication
  • Support heating function (for low-temperature conditions)
  • Alarm dry contact function
  • Charge overcurrent protection
  • Charge overvoltage protection
  • Charge over temperature protection
  • Low temperature protection during charge
  • Discharge overcurrent protection
  • Discharge undervoltage protection
  • Discharge over temperature protection
  • Short circuit protection
  • Battery parallel current limiting function

2. Specifications

The JIKONG JKBMS V19 series offers various models with different current ratings and cell configurations. Below are the general and model-specific specifications.

2.1. General Parameters

Parameter Value Unit
Supply Voltage20-70V
Standby Power Consumption12mW
Operating Power Consumption1100mW
Operating Temperature-30-70°C
Max. Number of Collection Strings16S
Max. Balancing Current1-2A
Voltage Acquisition Accuracy±5mV
BMS Dimensions (L*W*H)300*100*24mm
Finished Weight1000g
CertificationCE, FCC-
Balance FunctionActive Balanced BMS-
Charge and Discharge PortCommon Port BMS-
TypeLIFEPO4 Battery BMS-
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection-

2.2. Model-Specific Parameters

Technical Index JK-PB1A16S10P JK-PB1A16S15P JK-PB2A16S15P JK-PB2A16S20P
Number of Battery Strings (Li-ion)7S-16S7S-16S7S-16S7S-16S
Number of Battery Strings (LiFePo4)8S-16S8S-16S8S-16S8S-16S
Number of Battery Strings (LTO)14S-16S14S-16S14S-16S14S-16S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.8mΩ0.4mΩ0.4mΩ0.3mΩ
Continuous Discharge Current100A150A150A200A
Maximum Discharge Current (MAX 2min)200A300A300A350A
Over Charge Protection Current (ADJ)10-100A10-150A10-150A10-200A
Other Interfaces (Default)RS485/232/CAN
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection4
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS/Harmony
Parallel Charging Current Limiting10A
Address Dial Switch4
DRY Contact2
JIKONG Product Specifications Table

Image: Detailed product specifications for various JKBMS models.

3. Setup and Installation

Proper installation and wiring are crucial for the safe and effective operation of your JIKONG JKBMS V19. This BMS is suitable for 7-16 series lithium battery packs. Different cell counts require specific wiring methods.

3.1. Packing List

Before starting, verify all components are present:

  1. BMS x 1
  2. Interface board x 1
  3. Adapter cable B x 1 (long 30cm)
  4. Adapter cable A x 1 (long 30cm)
  5. R545 Network cable x 1 (long 40cm)
  6. Sampling line A x 2 (long 90cm)
  7. Sampling line B x 1 (long 90cm)
  8. Sampling line C x 1 (long 90cm)
  9. Switch x 1 (long 50cm)
  10. Adapter cable C x 1 (long 30cm)
  11. Heating Adapter cable x 1 (long 15cm)
  12. Adapter x 1
JIKONG BMS Packing List

Image: Visual representation of the JIKONG BMS packing list components.

3.2. Wiring Instructions

Follow these steps for wiring:

  1. Connect all the cables.
  2. Insert the cable into the BMS.
  3. Connect the B-line and the P-line to the battery.
  4. Important: There are two B8 cables. Only the first B8 cable needs to be connected. The second B8 cable does not need to be connected.
Wiring Diagram for 16-string and 8-string cells

Image: Wiring diagrams for 16-string and 8-string battery cell configurations.

3.3. Device Activation

Before powering on the protection board, ensure the balance cable is properly connected and that P- and B- are correctly connected. Verify the protection board is securely fixed to the battery core. Incorrect connections can lead to abnormal operation or damage.

The protection board does not have a power-on control switch. It is designed for charging activation: the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.

Alternatively, the BMS can be activated via a key press (if a display screen and button are used) or through the display interface by inserting the cable and pressing the button.

3.4. APP Installation

The JIKONG BMS features a mobile APP for Android, iOS, and HarmonyOS. Scan the QR code below to download the APP. Android Version 7 or higher is required.

Mobile APP QR Code for JIKONG BMS

Image: QR code for downloading the JIKONG BMS mobile application.

4. Operation

4.1. Active Equalization

The BMS uses active equalization technology to transfer energy from high-voltage cells to low-voltage cells. Before using this function, set basic battery parameters in the APP, including number of cells, battery capacity, trigger equalization differential pressure (default is fine), voltage calibration, and current calibration. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C). If not needed, the balancing switch can be turned off in the BMS control page of the APP.

4.2. Display Interface

The protection board has a reserved display interface. Users can connect an optional display screen to view battery information conveniently.

Multi-screen display options for JIKONG BMS

Image: Options for monitoring battery data via mobile APP, PC software, or dedicated JIKONG display.

4.3. Communication Functions

The BMS supports CAN and RS485 communications. The default CAN communication rate is 250K. Users can select the appropriate protocol in the APP based on their inverter brand. Two RS485 interfaces are available: RS485-1 for communication with inverters and settings, and RS485-2 for parallel output to connect battery packs and communicate with a host computer. The communication address can be set via DIP switches (0-15).

JIKONG BMS Communication Interfaces

Image: Diagram showing the four communication modes (CAN, RS485, UART, RS232) and other modules.

4.4. Parallel Function

The parallel function allows multiple BMS units to be monitored simultaneously by a host computer via the RS485 bus. This requires a USB to RS485 serial port cable and JIKONG host computer software. Each BMS must have a unique address (0-15), with address 0 typically being the host.

Parallel Monitoring Diagram for JIKONG BMS

Image: Schematic diagram illustrating the parallel monitoring setup for multiple JIKONG BMS units.

4.5. Emergency Switch

The BMS includes an emergency switch function. If issues like over-temperature, over-discharge, over-charge, or cell drop occur, activating the emergency switch via the APP's BMS control page will enable charge and discharge for 30 minutes, providing emergency use time. The protection board will continue to operate until the 30-minute cycle ends, even if a single cell reaches the automatic shutdown voltage.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your JIKONG JKBMS V19.

  • Firmware Updates: Periodically check the JIKONG official website or APP for firmware updates to ensure you have the latest features and bug fixes.
  • Connection Checks: Regularly inspect all wiring connections (balance cables, power cables, communication cables) for tightness and corrosion. Loose connections can lead to inaccurate readings or system malfunctions.
  • Cleaning: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquids or abrasive cleaners.
  • Temperature Monitoring: Ensure the BMS operates within its specified temperature range (-30°C to 70°C). Adequate ventilation is important, especially in enclosed systems.
  • Battery Health Monitoring: Use the mobile APP or PC software to regularly monitor battery cell voltages, temperatures, and overall pack health. This helps in early detection of potential issues.

6. Troubleshooting

This section provides solutions to common issues you might encounter with your JIKONG JKBMS V19.

6.1. Common Protection Triggers and Solutions

  • Overvoltage Protection: If triggered during charging, the BMS will stop charging. Check individual cell voltages via the APP. Ensure your charger voltage is appropriate for your battery type and cell count. The protection will release when all cell voltages drop below the recovery voltage.
  • Undervoltage Protection: If triggered during discharge, the BMS will stop discharging. Recharge the battery pack. The protection will release when all cell voltages rise above the recovery voltage.
  • Overcurrent Protection (Charge/Discharge): If triggered, the BMS will stop the respective operation. Reduce the charging/discharging current. The protection will release after the set delay time.
  • Overtemperature Protection: If triggered, the BMS will stop charging/discharging. Allow the battery to cool down. Ensure proper ventilation. The protection will release when the temperature drops below the recovery value.
  • Low Temperature Protection (Charge): If triggered, the BMS will stop charging. If operating in cold environments, consider using the heating function. The protection will release when the temperature rises above the recovery value.
  • Short Circuit Protection: If triggered, the BMS will immediately cut off output. Disconnect the load and check for any short circuits in the wiring. The protection will release after the set recovery time. If it triggers upon initial connection, increase the short circuit delay in the APP settings.

6.2. BMS Not Activating

  • Check Connections: Ensure all balance cables, P- and B- connections are secure and correct.
  • Charger Activation: The BMS activates when a charger with a voltage 2V higher than the battery voltage is connected.
  • Display/Button Activation: If using an optional display with a button, ensure the cable is inserted and press the button to activate.

6.3. Communication Issues (Bluetooth/RS485/CAN)

  • Bluetooth: Ensure Bluetooth is enabled on your mobile device and the BMS. Check the LED indicator (D1) for blinking (disconnected) or steady (connected) status.
  • RS485/CAN: Verify correct wiring of communication cables. For parallel systems, ensure each BMS has a unique address set via the DIP switches. Check the communication protocol settings in the APP/PC software.

7. User Tips

  • Double-Check Wiring: Always verify all connections, especially balance leads and main power cables, before applying power. Incorrect wiring is a common cause of initial setup issues.
  • Monitor Regularly: Utilize the mobile app or PC software to frequently check battery parameters. This proactive monitoring can help identify and address potential issues before they become critical.
  • Optimize Balance Current: Adjust the active equalization current in the APP based on your battery capacity. While higher current balances faster, ensure it doesn't exceed 0.2C for optimal battery health.
  • Consider Heating Function: If operating in consistently cold environments, enable and properly configure the heating function to protect your battery cells and maintain performance.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG Official Store directly through the platform where you purchased the product. Ensure you have your purchase details and product model number ready when contacting support.

You can also refer to the official JIKONG website for additional resources and updated documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.