HYCHIKA ML-CD182

Contents

HYCHIKA 18V Brushless Impact Drill

Model: ML-CD182

Introduction

Thank you for choosing the HYCHIKA 18V Professional Brushless Impact Drill. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before first use and keep it for future reference.

The HYCHIKA ML-CD182 is a versatile cordless drill driver designed for various home DIY and professional tasks. It features a powerful brushless motor, multiple torque settings, and variable speed control, making it suitable for drilling, screwdriving, and impact drilling applications.

HYCHIKA 18V Brushless Impact Drill with included accessories: drill, battery, charger, belt clip, and various drill bits and screwdriver bits.
Figure 1: HYCHIKA 18V Brushless Impact Drill and included accessories.

General Safety Instructions

Always follow basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Keep this manual handy for reference.

  • Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Electrical Safety: Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
  • Personal Safety: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
  • Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn it on and off. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.

Product Overview

Familiarize yourself with the components of your HYCHIKA 18V Brushless Impact Drill for safe and effective operation.

Diagram of HYCHIKA 18V Brushless Impact Drill with labeled parts: 3-Mode Selector, Torque Adjustment, Keyless Chuck, Forward/Reverse Switch, Trigger Switch, Built-in LED, Battery Release Button, Battery Capacity Indicator, Battery Pack, Belt Clip, Soft Grip Handle, Motor Vents, Speed Control.
Figure 2: Key components of the HYCHIKA 18V Brushless Impact Drill.
  1. 3-Mode Selector: Switches between drilling, screwdriving, and impact drilling modes.
  2. Torque Adjustment Ring: Adjusts the torque setting (21+3 positions).
  3. Keyless Chuck: For quick and easy bit changes.
  4. Forward/Reverse Switch: Controls the direction of rotation.
  5. Trigger Switch: Activates the drill and controls variable speed.
  6. Built-in LED Light: Illuminates the work area.
  7. Battery Release Button: Releases the battery pack from the drill.
  8. Battery Capacity Indicator: Shows the remaining battery charge.
  9. Battery Pack: 18V 2.0Ah Li-ion battery.
  10. Belt Clip: For convenient carrying.
  11. Soft Grip Handle: Provides comfortable and secure handling.
  12. Motor Vents: For cooling the motor.
  13. Speed Control: High/Low speed selector.

Specifications

Technical data for the HYCHIKA 18V Brushless Impact Drill (Model ML-CD182).

FeatureSpecification
Model NumberML-CD182
Brand NameHYCHIKA
Rated Voltage18V
Power SourceBattery (Li-ion)
Battery Capacity2.0Ah
Motor TypeBrushless
Rated Torque60 Nm
No-Load Speed (Low)0-500 RPM
No-Load Speed (High)0-2000 RPM
Impact Rate (Frequency)3200 BPM
Torque Settings21+3 (Drill, Screwdriver, Impact)
Weight2.9 KG
CertificationCE
UseHome DIY
Image highlighting the brushless motor features: 18V/2.0Ah x2 (note: product comes with 1 battery), High Power, Ergonomic Handle, Max torque: 60N.m, No Spark, 3 Modes.
Figure 3: Benefits of the brushless motor and key features.

Setup

1. Charging the Battery

The battery pack is not fully charged at the time of purchase. It is recommended to fully charge the battery before first use.

  • Connect the fast charger to a standard power outlet.
  • Slide the battery pack onto the charger until it clicks into place.
  • The charger indicator light will show the charging status. A full charge typically takes 1 hour for the 2.0Ah battery.
  • Once fully charged, remove the battery pack from the charger.
Image showing a hand placing an 18V 2.0Ah HYCHIKA battery pack into its charger, with a 60-minute charging time indicated.
Figure 4: Charging the 18V 2.0Ah Li-ion battery pack.

2. Installing/Removing the Battery Pack

  • To install: Align the battery pack with the base of the drill handle and slide it in until it locks securely.
  • To remove: Press the Battery Release Button (7) and slide the battery pack out.

3. Installing/Removing Drill Bits or Screwdriver Bits

The drill features a keyless chuck for easy accessory changes.

  • To open the chuck: Hold the rear part of the chuck and rotate the front part counter-clockwise until the jaws are wide enough for the bit.
  • Insert the desired drill bit or screwdriver bit into the chuck. Ensure the bit is centered.
  • To close the chuck: Hold the rear part of the chuck and rotate the front part clockwise until the bit is firmly secured. Do not overtighten.

Operating Instructions

1. Selecting Operating Mode

Use the 3-Mode Selector (1) to choose the appropriate mode for your task:

  • Screwdriver Mode: For driving and removing screws.
  • Drill Mode: For drilling holes in wood, plastic, and metal.
  • Impact Drill Mode: For drilling into masonry and concrete (requires appropriate masonry bits).

2. Adjusting Torque Settings

The Torque Adjustment Ring (2) allows you to select from 21 torque settings plus a drilling and impact drilling setting. Choose a lower torque for smaller screws or softer materials to prevent overtightening or stripping. Use higher torque for larger screws or harder materials.

Image showing the 21+3 adjustable torque setting on the drill, with icons for drilling and hammer drill modes. Also shows the forward/reverse button and variable speed settings (0-500RPM and 0-2000RPM) with examples of low and high speed use.
Figure 5: Torque adjustment and variable speed control.

3. Selecting Speed

The drill offers two variable speed ranges via the Speed Control switch (13):

  • Low Speed (0-500 RPM): Ideal for screwdriving, larger drilling diameters, or applications requiring more torque and control.
  • High Speed (0-2000 RPM): Suitable for smaller drilling diameters and faster drilling in softer materials.

The Trigger Switch (5) provides variable speed control within the selected range; press lightly for slower speed and harder for faster speed.

4. Forward/Reverse Operation

The Forward/Reverse Switch (4) controls the direction of rotation. Push it to the left for forward rotation (driving screws, drilling) and to the right for reverse rotation (removing screws, backing out bits). Ensure the switch is in the center position to lock the trigger and prevent accidental starting.

5. Using the Built-in LED Light

The Built-in LED Light (6) automatically illuminates when the trigger switch is pressed, providing visibility in dimly lit work areas.

A man using the HYCHIKA drill in a dark workshop, with the built-in LED light illuminating the work surface.
Figure 6: The built-in LED light illuminates the work area.

6. General Usage Tips

  • Always hold the drill firmly with both hands, especially when using higher torque settings or impact mode.
  • Apply steady, even pressure. Do not force the drill.
  • For drilling, start with a small pilot hole if necessary, especially in hard materials.
  • When driving screws, ensure the bit is fully engaged in the screw head to prevent stripping.
A collage of images showing the HYCHIKA drill being used for various tasks: drilling into wood, metal, and a wall, and driving screws into furniture.
Figure 7: Examples of the drill in various applications.

Maintenance

1. Cleaning

  • Regularly clean the ventilation slots (Motor Vents) to prevent overheating. Use a soft brush or compressed air.
  • Wipe the tool housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Keep the chuck jaws clean and free of debris to ensure proper bit gripping.

2. Battery Care

  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Do not store batteries in a discharged state for extended periods. Recharge them periodically if not in use.
  • Do not expose batteries to water or moisture.

3. Storage

  • Store the drill and accessories in a clean, dry, and secure location, out of reach of children.
  • Remove the battery pack from the drill before storing for extended periods.

Troubleshooting

ProblemPossible CauseSolution
Drill does not startBattery not charged or not properly inserted. Forward/Reverse switch in center (locked) position.Ensure battery is fully charged and securely inserted. Move Forward/Reverse switch to either forward or reverse position.
Loss of power during operationBattery charge is low. Overload protection activated.Recharge the battery. Reduce pressure on the tool or use a lower speed/torque setting. Allow the tool to cool down.
Bit slips in chuckChuck not tightened sufficiently. Bit shank is dirty or damaged.Retighten the chuck firmly. Clean the bit shank. Replace damaged bits.
Excessive vibration or noiseDamaged or bent bit. Loose components.Replace the bit. Check for any loose parts and tighten if possible. If problem persists, contact support.

User Tips

  • Spare Batteries: Users frequently inquire about purchasing additional or replacement batteries. It is recommended to contact HYCHIKA customer support or authorized dealers for compatible battery packs to ensure optimal performance and safety.
  • Battery Compatibility: This drill is designed for HYCHIKA 18V Li-ion batteries. Compatibility with batteries from other brands (e.g., Dewalt) is not guaranteed and may void your warranty or cause damage to the tool. Always use HYCHIKA-branded batteries and chargers.

Warranty and Support

HYCHIKA products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official HYCHIKA website.

For technical assistance, spare parts, or service inquiries, please contact HYCHIKA customer support through their official channels. When contacting support, please have your product model number (ML-CD182) and purchase information ready.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.