CHANTOWER Pure Sine Wave Inverter (1000W-6000W)

Contents

CHANTOWER Pure Sine Wave Power Inverter User Manual

Models: 1000W, 1600W, 2000W, 3000W, 4000W, 5000W, 6000W

CHANTOWER Pure Sine Wave Power Inverter

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your CHANTOWER Pure Sine Wave Power Inverter. This device converts DC power (from batteries) to AC power, suitable for a wide range of electrical appliances. Please read this manual carefully before use to ensure correct operation and to prevent damage.

2. Product Features

  • Pure Sine Wave Output: Provides clean, stable power suitable for sensitive electronics.
  • High Efficiency: Lightweight, small size, low weight, high efficiency, low operating noise, and reasonable design.
  • Advanced Control Technology: Adopts Efficient SPWM Pulse Width Control Technology and multiple high-tech intelligent driver chips.
  • Reliable Construction: SMT Chip Mounting Technology ensures precise control, high reliability, and a low failure rate.
  • Strong Load Capacity: High efficiency conversion rate and strong load capacity for wide application.
  • Comprehensive Protection: Multiple intelligent security protections including overload, high voltage, low voltage, overheating, reverse connection, short circuit, and over-current protection.
  • Intelligent Cooling: Features an intelligent temperature-controlled fan that activates automatically when needed.
  • Real-time Monitoring: Upgraded LCD display provides real-time feedback on battery level, frequency, output voltage, temperature, power, and input voltage.
LCD Display Details

Figure 1: Detailed view of the LCD display showing operational parameters.

Internal Components of Inverter

Figure 2: Internal components highlighting pure copper transformer, filter inductance, high voltage capacitance, and pressure-resistant MOS tube.

3. Safety Precautions

3.1 Usage Environment Requirements

  • Dry Environment: Do not immerse the inverter in water or expose it to rain.
  • Temperature Conditions: Operate in a cool place with ambient temperatures between 10°C and 40°C.
  • Ventilation: Do not use the power inverter in a narrow space or cover it. Ensure good ventilation to prevent overheating.

3.2 Important Considerations

  • Appliance Startup Power: Appliances like refrigerators or motors may have a high peak startup power. If the peak power exceeds the inverter's capacity, it may trigger overload protection. In such cases, turn off all electrical appliances, then turn on the inverter, and then connect and turn on appliances one by one, starting with the highest peak power appliance last.
  • Battery Voltage Monitoring: During use, if the battery voltage drops (e.g., a 12V battery drops to 10.4-11.0V), the inverter will sound an alarm. Turn off sensitive electrical appliances promptly. If the voltage drops further (e.g., to 9.7-10.3V), the inverter will stop outputting current, and a red indicator light will illuminate.
  • Vehicle Operation: If using in a vehicle, start the vehicle or charge the battery in a timely manner to prevent battery depletion.
  • Input Voltage Limits: Although the inverter has overvoltage protection, exceeding the maximum input voltage (e.g., above 16V for a 12V system) can still damage the inverter.
  • Surface Temperature: After continuous use, the inverter's casing surface temperature may rise to 60°C. Ensure smooth airflow and keep it away from objects susceptible to high temperature.
  • Minors: This power inverter is prohibited for use by minors.

4. Package Contents

Upon unpacking, please ensure all the following items are included:

  • 1 x CHANTOWER Pure Sine Wave Power Inverter
  • 1 x Battery thick line (Red and Black cables)
  • 1 x Battery clip set
  • 1 x Instruction manual

5. Setup and Connection

Important: The battery voltage must match the inverter's input voltage. For example, a 12V inverter requires a 12V battery, a 24V inverter requires a 24V battery, and so on.

5.1 Direct Battery Connection

Connect the inverter directly to your battery bank. Ensure good contact between the battery terminals and the inverter's input terminals (red for positive, black for negative).

Direct Battery Connection Diagram

Figure 3: Basic wiring diagram showing inverter connected to a 12V battery and powering appliances.

If you need to extend the wiring, ensure the extension wire is twice as thick as the original wiring to prevent voltage drop and overheating.

5.2 Connecting Multiple Batteries in Series

For higher voltage systems, multiple batteries can be connected in series. Ensure the total voltage matches the inverter's input voltage.

Battery Series Connection Diagrams

Figure 4: Diagrams for connecting multiple batteries in series for 24V, 48V, 60V, and 72V systems.

5.3 Car Cigarette Lighter Connection

If your inverter model is equipped with a car cigarette lighter plug, you can use this method. Note that the cigarette lighter output typically supports electrical appliances with a load of less than 150W. If your appliance exceeds 150W, use the direct battery connection method.

5.4 Electric Motorcycle Connection

Electric motorcycles typically use 48V (four batteries in series) or 60V (five batteries in series). Select an inverter with the corresponding input voltage to match your electric motorcycle's battery voltage.

6. Operating Instructions

  1. Ensure the inverter switch is in the OFF position before connecting to the battery. Connect the inverter to the battery, ensuring good contact.
  2. Confirm that the power of all electrical appliances to be connected is within the inverter's rated continuous power (typically 50% of the peak power).
  3. Plug the electrical appliance's plug into the AC output socket(s) of the inverter.
  4. Turn the switch of the power inverter to ON. The green indicator light should illuminate, indicating normal operation.
  5. If the red indicator light illuminates, it indicates that the inverter has entered a protection mode due to overvoltage, undervoltage, overload, or overheating. Refer to the troubleshooting section.
  6. If using the vehicle cigarette lighter socket, and the inverter alarms or shuts down due to limited output, start the vehicle or reduce the power consumption of connected devices to restore normal operation.

Video 1: Demonstration of the inverter powering a kettle and a drill, showcasing its capability with various loads.

7. Technical Specifications

CHANTOWER Pure Sine Wave Inverter Specifications
Feature Specification
Output Voltage WaveformPure Sine Wave
Output Voltage110V / 220V
Output Frequency50Hz / 60Hz
Input Voltage Options12V / 24V / 48V / 60V / 72V
Under Voltage Alarm (12V system)10.4-11.0V
Low Pressure Shutdown (12V system)9.7-10.3V
Overpressure Shutdown (12V system)14.5-15.5V
Conversion Rate> 90%
No-load Current< 0.3A
Size (approx.)380*150*90mm
Weight (approx.)3kg
CertificationCE

Power Ratings (Continuous / Peak)

  • 1000W Inverter: 300W Continuous / 1000W Peak
  • 1600W Inverter: 800W Continuous / 1600W Peak
  • 2000W Inverter: 1000W Continuous / 2000W Peak
  • 3000W Inverter: 1300W Continuous / 3000W Peak
  • 4000W Inverter: 1600W Continuous / 4000W Peak
  • 5000W Inverter: 2200W Continuous / 5000W Peak
  • 6000W Inverter: 2700W Continuous / 6000W Peak
Power Inverter Model Specifications

Figure 5: Detailed specifications for various inverter power models.

8. Maintenance

  • Keep the inverter clean and free from dust. Use a dry cloth for cleaning.
  • Ensure proper ventilation around the unit. Regularly check that the cooling fan is not obstructed.
  • Periodically check all wiring connections to ensure they are secure and free from corrosion. Tighten any loose terminals.
  • Store the inverter in a dry, cool place when not in use for extended periods.
Pure Copper Wire

Figure 6: High-quality pure copper core wire for efficient power transfer.

9. Troubleshooting

Common Problems and Solutions
Problem Reason Solution
Indicator light not on, or red light on. Battery discharged, reverse connection, poor wiring contact. Check battery connection, ensure correct polarity, tighten wiring terminals. Charge or replace battery.
Inverter not working. Poor contact at wiring, power exceeds continuous rating. Check and tighten wiring connections. Ensure total appliance power is within inverter's continuous rating.
Red indicator light on, or inverter emits buzzing sound. Battery discharged, poor ventilation, overheating, overvoltage, undervoltage. Charge or replace battery. Turn off inverter, cool down for 15 minutes, remove obstructions, place in cool area, reduce load. Check input voltage.
Output voltage too low. Long or thin wiring, voltage decay. Shorten wiring or use thicker wires.
Inverter only works with low-power appliances. Current passes through wire, causing voltage decay. Reduce length of wire and use thicker wires. Use a larger capacity battery.
Battery runs out too quickly. Insufficient battery capacity, charger stops too early. Replace with a better intelligent charger. Use a larger capacity battery.
Real vs Virtual Power Comparison

Figure 7: Understanding the difference between virtual and real power output in inverters.

10. User Tips

  • Understand Power Ratings: Always consider the continuous power rating for your appliances, not just the peak power. The peak power is for short-term surges, typically a few seconds.
  • Wiring Thickness: For higher power loads, ensure your battery cables are sufficiently thick to prevent voltage drop and overheating. The provided cables are a starting point; consider upgrading for heavy use.
  • Battery Compatibility: The inverter's input voltage (e.g., 12V, 24V, 48V, 60V, 72V) must precisely match your battery system's voltage. While some batteries might have slightly higher peak voltages when fully charged (e.g., 67V for a 60V system), the inverter is designed to handle these minor fluctuations within its operating range.
  • Appliance Startup: For appliances with compressors (like refrigerators or air conditioners), allow a few minutes after they stop before restarting them. This reduces the initial startup load on the inverter.
  • Cooling Fan Operation: The intelligent cooling fan only activates under significant load or when the internal temperature rises, ensuring quiet operation during light use.

11. Frequently Asked Questions (FAQ)

Q: Can a 60V inverter handle battery peaks of 67V?
A: Yes, users have reported that a 72V inverter works perfectly with a battery that reaches 82V when fully charged, suggesting the 60V model should handle 67V peaks without issue.
Q: What is the actual continuous and peak power output of a 3000W inverter?
A: For a 3000W inverter, the continuous power is typically 1300W, and the peak power is 3000W for short durations (a few seconds).
Q: Will a 48V inverter work with a LiFePO4 battery at 58.4V?
A: The inverter's specifications indicate an overpressure shutdown for a 48V system at 48-52V. A 58.4V input might be too high and could trigger protection or damage the unit. Always ensure your battery voltage is within the specified operating range for the inverter model.
Q: Can this inverter power a 220V nail gun or a 120V welding machine?
A: The inverter can power a 220V nail gun if its power consumption is within the inverter's continuous rating. For a welding machine, ensure its nominal and peak power (including startup surge) are well within the inverter's capabilities. For example, a 1500W nominal, 1875W peak compressor might work with a sufficiently powerful inverter (e.g., 4000W or 5000W model).
Q: Does this inverter have a battery charging function?
A: No, this device is a power inverter, converting DC to AC. It does not have a built-in battery charging function.
Q: Is the input voltage automatic, or do I need to specify 24V?
A: The inverter models are specific to their input voltage (e.g., 12V, 24V, 48V). You must select the correct inverter model that matches your battery system's voltage. It is not automatic.
Q: Does the inverter have universal output sockets?
A: Yes, the inverter typically features universal shaped sockets to accommodate various plug types.
Q: What is the weight of the 5000W model?
A: The 5000W model weighs approximately 3kg.

12. Warranty and Support

12.1 Warranty Terms

This product comes with a three-year warranty. To ensure proper after-sales service, customers must strictly follow the instructions provided in this manual.

  • Product Exchange: Accessories must be complete and not affect secondary sales. Missing accessories may result in deductions based on factory price.
  • Warranty Repair: If the machine encounters quality problems without opening or modifying the original packaging, it will be repaired or replaced free of charge.
  • Paid Maintenance: Repairs due to unauthorized opening, modification, or product damage from harsh environments (e.g., excessively dirty or old casing) will be subject to a fee.
  • High-Power Machine Casings: Severely scratched, dirty, or old casings should be returned to the factory for repair. Repaired units within the warranty period will be returned in their original condition free of charge. Malfunctions from modified or unpacked machines will incur paid maintenance.
  • After receiving payment for any applicable fees, after-sales service will be promptly handled, and the product will be delivered to the customer.

12.2 Contact Support

For any warranty claims, technical support, or questions, please contact customer service. You may be asked to provide your order number, buyer name, telephone, and address.

A return and exchange registration form is provided on page 6 of the original user manual for your convenience.

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.