1. Introduction
Thank you for choosing the Andoer Half Moon LED Floor Lamp. This versatile lighting solution is designed to provide optimal illumination for a variety of applications, including beauty treatments, makeup artistry, vlogging, live streaming, nail art, eyelash extensions, and tattooing. Its unique half-moon shape ensures even, shadow-free lighting, while adjustable features offer complete control over your lighting environment.
Key features include:
- Special half-moon shape design for even illumination.
- 180 bi-color temperature LED lamp beads.
- 20W power output with 90+ high color rendering (CRI).
- Adjustable color temperature from 3000K (warm light) to 6000K (cold light) with three distinct modes.
- Dimmable brightness to suit various lighting conditions.
- Flexible rotation: lamp head rotates 360°, and the arm joint rotates 270°.
- Adjustable metal light stand with a height range of 54cm to 100.5cm (21.25-39.57in).
- Integrated adjustable and rotatable phone holder for convenient video recording.
- Soft light that is gentle on the eyes and produces no heat.
2. Safety Information
Please read and understand all safety instructions before using the product. Keep this manual for future reference.
- Electrical Safety: Ensure the power adapter is connected to a compatible power outlet (110V-240V, 50Hz/60Hz). Do not use the lamp with damaged cords or plugs. Avoid exposing the lamp to water or excessive moisture.
- Placement: Place the lamp on a stable, flat surface to prevent tipping. Ensure the base is securely tightened.
- Handling: Handle the lamp with care. Avoid dropping or subjecting it to strong impacts.
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp. Do not use abrasive cleaners or solvents.
- Ventilation: Although the lamp produces no heat, ensure adequate ventilation around the power adapter during prolonged use.
- Children and Pets: Keep the lamp out of reach of children and pets to prevent accidents.
3. Package Contents
Carefully unpack the box and ensure all items listed below are present and in good condition. If any items are missing or damaged, please contact customer support.
- 1 x LED Light (Half-moon lamp head)
- 1 x Foldable Arm
- 1 x Light Stand (Telescopic pole)
- 1 x Light Base (Round metal base)
- 1 x Phone Holder
- 1 x Power Adapter
- 2 x Bandage (for cable management)
4. Setup Instructions
Follow these steps to assemble your Andoer Half Moon LED Floor Lamp:
- Attach the Light Stand to the Base: Securely screw the light stand (4) into the light base (1). Ensure it is tightened firmly for stability.
- Connect the Foldable Arm: Attach the foldable arm (5) to the top of the light stand. The arm joint allows for 270° rotation.
- Mount the LED Light: Attach the half-moon LED light (7) to the end of the foldable arm.
- Install the Phone Holder: If desired, attach the phone holder (6) to the designated mounting point on the foldable arm, near the LED light. The phone holder can rotate 360°.
- Connect Power: Plug the power adapter (3) into the LED light's power input. Then, plug the power adapter into a suitable electrical outlet.
- Cable Management: Use the provided bandages (2) to neatly secure the power cable along the light stand, preventing tangles and ensuring a tidy setup.
5. Operating Instructions
The lamp is controlled via an inline remote on the power cable.
- Power On/Off: Press the power button (⏻) on the inline remote to turn the lamp on or off.
- Adjust Color Temperature: Use the 'Dimmer key' button (the one with the light bulb icon) to cycle through the three lighting modes: Cold Light (6000K), Soft Light (neutral), and Warm Light (3000K).
- Adjust Brightness: Use the '+' button to increase brightness and the '-' button to decrease brightness. The lamp offers adjustable brightness levels to suit your needs.
- Adjust Lamp Head Angle: The half-moon LED light head can be rotated 360° to direct light precisely where needed.
- Adjust Arm Angle: The foldable arm features a joint that allows for 270° rotation, providing flexibility in positioning the light.
- Adjust Stand Height: Loosen the locking mechanism on the light stand to adjust its height between 54cm and 100.5cm. Tighten the lock securely once the desired height is achieved.
- Using the Phone Holder: Place your smartphone into the adjustable phone holder. The holder can be rotated 360° to achieve the perfect angle for video recording or live streaming.
6. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your lamp.
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry, lint-free cloth to wipe down the lamp head, stand, and base. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish or electronic components.
- Storage: When not in use for extended periods, store the lamp in a clean, dry place, away from direct sunlight and extreme temperatures. You may disassemble the lamp and store it in its original packaging to protect it from dust and damage.
- Cable Care: Regularly inspect the power cable and adapter for any signs of damage (fraying, cuts, exposed wires). If any damage is found, discontinue use immediately and contact customer support. Avoid bending or kinking the cable sharply.
- Joints and Adjustments: Periodically check that all screws and adjustable joints are secure. Tighten them gently if they feel loose, but do not overtighten.
7. Troubleshooting
If you encounter any issues with your Andoer Half Moon LED Floor Lamp, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply; loose connection; faulty power adapter. | Ensure the power adapter is securely plugged into both the lamp and a working electrical outlet. Check if the outlet is functional. Try a different outlet. |
| Brightness or color temperature cannot be adjusted. | Controller malfunction; incorrect button usage. | Refer to the 'Operating Instructions' to ensure correct button usage. If the issue persists, the controller may be faulty. |
| Lamp is unstable or wobbles. | Base not securely attached; stand not fully tightened; uneven surface. | Ensure the light base is firmly screwed onto the light stand. Check that the telescopic stand is locked at the desired height. Place the lamp on a flat, stable surface. |
| Phone holder is loose or not holding phone securely. | Holder not tightened; phone too large/small for holder. | Ensure the phone holder is securely attached to the lamp arm. Adjust the holder's grip to fit your phone snugly. |
If you are unable to resolve the issue using this guide, please contact customer support for further assistance.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Floor Telescopic Beauty Lamp |
| Material | Aluminum Alloy + ABS |
| Power | 20W |
| LED Beads | 180 pcs |
| Color Temperature | 3000K-6000K (Adjustable) |
| Brightness | Adjustable |
| CRI (Color Rendering Index) | >90 |
| Light Stand Height | 54cm-100.5cm (21.25-39.57in) |
| Input Voltage | 110V-240V 50Hz/60Hz |
| Net Weight | 2.4kg (5.3lbs) |
| Base Diameter | 26cm |
| Arm Lengths | 35cm, 32cm, 41.5cm (approximate, as per diagram) |
9. User Tips
Maximize your experience with the Half Moon LED Floor Lamp with these helpful tips:
- Optimal Placement: For makeup and beauty treatments, position the lamp directly over the client's face or work area to eliminate shadows and ensure even lighting.
- Vlogging & Live Streaming: Utilize the phone holder to keep your camera steady and at the perfect angle. Experiment with different color temperatures to match your environment or desired mood.
- Nail Art & Detailed Work: The 360° rotating lamp head is ideal for focusing light precisely on small, intricate areas, reducing eye strain.
- Cable Management: Always use the provided bandages to keep the power cable tidy and prevent tripping hazards, especially in busy salon environments.
- Experiment with Settings: Don't be afraid to try different brightness and color temperature combinations. The best setting often depends on the ambient light and the specific task at hand.
10. Warranty and Support
Andoer products are manufactured to high-quality standards. For any warranty claims or technical support, please retain your proof of purchase and contact the seller or manufacturer directly. Information regarding specific warranty periods and support procedures can typically be found on the seller's product page or by contacting their customer service.
Please note that this manual does not cover specific warranty terms or return policies, which may vary by region and seller.
